Development of Laser Strategies for Improved Rate Capability and Reduced Lithium Plating
Source abstract
Abstract
Over the past few years, laser structuring of electrodes has been shown as a powerful tool to significantly improve the rate capability and cycling ability of lithium-ion batteries. However, the impact of anode/cathode pattern combinations on electrochemical performance in full-cell configurations remains poorly understood. This work investigated for the first time the influence of laser structuring strategies and pattern combinations on the laser processing rate as well as the electrochemical performance of full cells containing NMC 811 cathodes and graphite anodes. Meanwhile, the mass losses due to laser ablation with different strategies were kept similar for cathodes and anodes. The line-patterning process exhibited a processing rate that was an order of magnitude higher than that for blind hole drilling. Moreover, line patterning of graphite anodes with an average laser power of 5.0 W showed a two to five times higher laser processing rate than with 2.5 W. Subsequently, the structured electrodes were cross-combined and assembled into full cells. All cells with laser-structured electrodes exhibited improved rate performance, reduced ionic resistance, and a shift in the onset of lithium plating to higher C-rates in comparison to the reference cells with unstructured electrodes. In particular, the cells with “Line 5 W” electrodes demonstrated excellent rate performance, delivering an increase of 72 mAh g−1 in discharge capacity compared to the reference cells at 5C and achieving 80% state of charge in 18 min. The results indicated that line patterns enhance rate performance more effectively than hole patterns. Furthermore, wider grooves in the electrodes were produced using higher average laser power, which may provide larger electrolyte reservoirs. This could support the rewetting processes of the electrolyte in the electrodes during electrochemical cycling and thus significantly improve rate performance and cell lifetime.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Institute for Applied Materials-Applied Materials Physics (IAM-AWP), Karlsruhe Institute of Technology (KIT), Kaiserstraße 12, 76131 Karlsruhe, Germany
Funding
German Research Foundation
References (55)
Show source-provided references
1. The development and future of lithium ion batteries10.1149/2.0251701jes ↗
2. Performance and cost of materials for lithium-based rechargeable automotive batteries10.1038/s41560-018-0107-2 ↗
3. Comparison of the structural and electrochemical properties of layered Li[NixCoyMnz]O2 (x= 1/3, 0.5, 0.6, 0.7, 0.8 and 0.85) cathode material for lithium-ion batteries10.1016/j.jpowsour.2013.01.063 ↗
4. Nickel-rich and lithium-rich layered oxide cathodes: Progress and perspectives10.1002/aenm.201501010 ↗
5. The success story of graphite as a lithium-ion anode material–fundamentals, remaining challenges, and recent developments including silicon (oxide) composites10.1039/D0SE00175A ↗
6. Cost modeling of lithium-ion battery cells for automotive applications10.1002/ese3.47 ↗
7. Zheng, J., Xing, G., Jin, L., Lu, Y., Qin, N., Gao, S., and Zheng, J.P. (2023). Strategies and challenge of thick electrodes for energy storage: A review. Batteries, 9.10.3390/batteries9030151 ↗
8. Thick electrode batteries: Principles, opportunities, and challenges10.1002/aenm.201901457 ↗
9. From fundamental understanding to engineering design of high-performance thick electrodes for scalable energy-storage systems10.1002/adma.202101275 ↗
10. Understanding thickness-dependent transport kinetics in nanosheet-based battery electrodes10.1021/acs.chemmater.9b05396 ↗
11. Toward high-areal-capacity electrodes for lithium and sodium ion batteries10.1002/aenm.202201834 ↗
12. Impact of pore tortuosity on electrode kinetics in lithium battery electrodes: Study in directionally freeze-cast LiNi0.8Co0.15Al0.05O2 (NCA)10.1149/2.1321802jes ↗
13. Fabrication of low-tortuosity ultrahigh-area-capacity battery electrodes through magnetic alignment of emulsion-based slurries10.1002/aenm.201802472 ↗
14. Sterzl, Y., and Pfleging, W. (2024). Optimizing Structural Patterns for 3D Electrodes in Lithium-Ion Batteries for Enhanced Fast-Charging Capability and Reduced Lithium Plating. Batteries, 10.10.3390/batteries10050160 ↗
15. Recent progress in laser texturing of battery materials: A review of tuning electrochemical performances, related material development, and prospects for large-scale manufacturing10.1088/2631-7990/abca84 ↗
16. Integration of laser structuring into the electrode manufacturing process chain for lithium-ion batteries10.1016/j.jpowsour.2022.232478 ↗
17. A review of laser electrode processing for development and manufacturing of lithium-ion batteries10.1515/nanoph-2017-0044 ↗
18. Rapid electrolyte wetting of lithium-ion batteries containing laser structured electrodes: In situ visualization by neutron radiography10.1007/s00170-019-03347-4 ↗
19. A new approach for rapid electrolyte wetting in tape cast electrodes for lithium-ion batteries10.1039/C4TA02353F ↗
20. Effect of laser-induced groove morphology on the wettability and performance of Lithium-ion batteries10.1016/j.matdes.2023.112020 ↗
21. Influence of laser pulse duration on the electrochemical performance of laser structured LiFePO4 composite electrodes10.1016/j.jpowsour.2015.10.086 ↗
22. Laser ablation for structuring Li-ion electrodes for fast charging and its impact on material properties, rate capability, Li plating, and wetting10.1016/j.jpowsour.2022.231464 ↗
23. Enhanced fast charging and reduced lithium-plating by laser-structured anodes for lithium-ion batteries10.1149/2.1241915jes ↗
24. Development of laser structured three-dimensional patterns for improved wettability and performance of electrodes for lithium-ion batteries10.1016/j.colsurfa.2024.134393 ↗
25. Laser structuring of graphite anodes and NMC cathodes–Proportionate influence on electrode characteristics and cell performance10.1016/j.electacta.2021.139002 ↗
26. Zhu, P., Sterzl, Y., and Pfleging, W. (2024). Impact of Laser Ablation Strategies on Electrochemical Performances of 3D Batteries Containing Aqueous Acid Processed Li(Ni0.6Mn0.2Co0.2)O2 Cathodes with High Mass Loading. Batteries, 10.10.3390/batteries10100354 ↗
27. Mechanical stability test for Hevea Latex10.1021/ac60033a015 ↗
28. Zhu, P., Seifert, H.J., and Pfleging, W. (2019). The ultrafast laser ablation of Li(Ni0.6Mn0.2Co0.2)O2 electrodes with high mass loading. Appl. Sci., 9.10.3390/app9194067 ↗
29. Accelerated degradation model for C-rate loading of lithium-ion batteries10.1016/j.ijepes.2018.12.016 ↗
30. Lithium-ion battery cell formation: Status and future directions towards a knowledge-based process design10.1039/D3EE03559J ↗
31. Current status and challenges for automotive battery production technologies10.1038/s41560-018-0130-3 ↗
32. Tortuosity determination of battery electrodes and separators by impedance spectroscopy10.1149/2.1141607jes ↗
33. Theoretical and experimental analysis of porous electrodes for lithium-ion batteries by electrochemical impedance spectroscopy using a symmetric cell10.1149/2.057207jes ↗
34. Electrochemical impedance spectroscopy—A tutorial10.1021/acsmeasuresciau.2c00070 ↗
35. Evaluation and modeling of the cell resistance in anode-supported solid oxide fuel cells10.1149/1.2801372 ↗
36. Reconstruction of relaxation time distribution from linear electrochemical impedance spectroscopy10.1016/j.jpowsour.2015.02.107 ↗
37. Changes in Structure and Ionic Resistance of Lithium-Ion Battery Graphite Electrodes—Part I: Impact of Formation and SEI10.1149/1945-7111/addd4f ↗
38. Assessing cathode–electrolyte interphases in batteries10.1038/s41560-024-01639-y ↗
39. Challenges, laser processing and electrochemical characteristics on application of ultra-thick electrode for high-energy lithium-ion battery10.1016/j.jpowsour.2020.228948 ↗
40. Formation mechanisms of solid electrolyte interphase and its influence on lithium battery performance10.1016/j.mtener.2025.102124 ↗
41. Methods—Understanding porous electrode impedance and the implications for the impedance analysis of li-ion battery electrodes10.1149/1945-7111/ac1892 ↗
42. Internal resistance mapping preparation to optimize electrode thickness and density using symmetric cell for high-performance lithium-ion batteries and capacitors10.1016/j.jpowsour.2018.05.083 ↗
43. In-situ determination of onset lithium plating for safe Li-ion batteries10.1016/j.jechem.2021.10.016 ↗
44. Fast charging of lithium-ion batteries: A review of materials aspects10.1002/aenm.202101126 ↗
45. Fast-charging capability of lithium-ion cells: Influence of electrode aging and electrolyte consumption10.1016/j.apenergy.2021.117747 ↗
46. Uneven film formation across depth of porous graphite electrodes in cycled commercial Li-ion batteries10.1021/jp509665e ↗
47. In situ detection of lithium metal plating on graphite in experimental cells10.1016/j.jpowsour.2015.01.046 ↗
48. Direct in situ measurements of Li transport in Li-ion battery negative electrodes10.1016/j.cplett.2009.12.033 ↗
49. Lithium plating mechanism, detection, and mitigation in lithium-ion batteries10.1016/j.pecs.2021.100953 ↗
50. Application of the differential charging voltage analysis to determine the onset of lithium-plating during fast charging of lithium-ion cells10.1016/j.jpowsour.2021.229794 ↗
51. A look into the voltage plateau signal for detection and quantification of lithium plating in lithium-ion cells10.1016/j.jpowsour.2018.05.073 ↗
52. A combined electrochemical and microscopical analysis on the effect of laser structuring on Li plating of graphite anodes for lithium-ion batteries10.1016/j.est.2024.114187 ↗
53. Ragone plots revisited: A review of methodology and application across energy storage technologies10.1016/j.est.2023.109097 ↗
54. Potential and limitations of research battery cell types for electrochemical data acquisition10.1002/batt.202300080 ↗
55. Nondestructive detection, characterization, and quantification of lithium plating in commercial lithium-ion batteries10.1016/j.jpowsour.2013.12.060 ↗