Experimental Benchmarking of Redox Flow Cells
Source abstract
Abstract
There are increasing numbers of scientific articles dedicated to developments in the field of redox flow batteries. To date it is most common to provide efficiency values as a measure of performance. However, there are no agreed standard experimental conditions for these measurements, and so their merit as a tool for comparing different innovations among research groups is put into question. In the following manuscript, various experimental precautions are outlined to reduce experimental artefacts. Original experimental measurements on vanadium flow cells, together with data from the literature, are examined to explore efficiencies and two alternative benchmarking metrics: resistivity and self-discharge current density. The sensitivity of these parameters to current density, temperature, flow rate and state-of-charge range are examined, from which it is concluded that resistivity and self-discharge current density exhibit superior properties to efficiencies for quantifying flow battery improvements.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced battery technologies research · Advanced Battery Technologies Research · Advancements in Battery Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Invinity Energy Systems, Unit 1, 10 Easter Inch Road, East Inch Ind. Estate, Bathgate EH48 2FG, UK
References (54)
Show source-provided references
1. Zhang, H., Li, X., and Zhang, J. (2018). Redox Flow Batteries Fundamentals and Applications, CRC Press.10.1201/9781315152684 ↗
2. Advanced redox-flow batteries: A perspective10.1149/2.0101601jes ↗
3. Recent advances with UNSW vanadium-based redox flow batteries10.1002/er.1658 ↗
4. Díaz-Ramírez, M.C., Ferreira, V.J., García-Armingol, T., López-Sabirón, A.M., and Ferreira, G. (2020). Environmental Assessment of Electrochemical Energy Storage Device Manufacturing to Identify Drivers for Attaining Goals of Sustainable Materials 4.0. Sustainability, 12.10.3390/su12010342 ↗
5. Bielitz, C. (2016). Life-Cycle Assessment of Battery Technologies for Electricity Storage. [Master’s Thesis, ETH Zürich, PSI].
6. Assessing the Climate Change Mitigation Potential of Stationary Energy Storage for Electricity Grid Services10.1021/acs.est.9b06231 ↗
7. Türker, B. (2014). Modeling and Utilzing a Vanadium Redox Flow Battery for Easier Grid and Market Integration of Wind Power. [Master’s Thesis, Universität Bremen].
8. Zhang, X., Li, Y., Skyllas-Kazacos, M., and Bao, J. (2016). Optimal Sizing of Vanadium Redox Flow Battery Systems for Residential Applications Based on Battery Electrochemical Characteristics. Energies, 9.10.3390/en9100857 ↗
9. Flowing electrolyte batteries. Test methods and results10.1016/0378-7753(86)80023-4 ↗
10. Haddadi-Asl, V. (1995). Conductive Carbon-Polymer Composite Electrode. [Ph.D. Thesis, UNSW].10.1002/app.1995.070571205 ↗
11. Investigations on transfer of water and vanadium ions across Nafion membrane in an operating vanadium redox flow battery10.1016/j.jpowsour.2009.08.041 ↗
12. Whitehead, A.H. (2022, January 28–29). Benchmarking flow cell performance. Proceedings of the International Flow Battery Forum (IFBF), Brussels, Belgium.
13. Skyllas-Kazacos, M. (2006, January 30–31). G1 and G2 Vanadium Redox Batteries for Renewable Energy Storage. Proceedings of the IRES 2006, Gelskirchen, Germany.
14. Tam, N.D. (2017). Development of a Halide-Free, Stabilised Vanadium Redox Flow Battery Electrolyte. [Ph.D. Thesis, Nanyang Technical University].
15. Bhattarai, A., Ghimire, P.C., Whitehead, A., Schweiss, R., Scherer, G.G., Wai, N., and Hng, H.H. (2018). Novel Approaches for Solving the Capacity Fade Problem during Operation of a Vanadium Redox Flow Battery. Batteries, 4.10.3390/batteries4040048 ↗
16. Liufeng, M., Mianyan, H., Klassen, A.P., and Harper, M.A.M. (2009). Redox Flow Battery and Method for Enabling Battery to Operate Continuously for Long Time. (CN 102055000), CN Patent.
17. Pore-scale analysis of effects of electrode morphology and electrolyte flow conditions on performance of vanadium redox flow batteries10.1016/j.jpowsour.2012.07.042 ↗
18. An enhancement to Vynnycky’s model for the all-vanadium redox flow battery10.1016/j.electacta.2013.12.074 ↗
19. Direct measurement of electrochemical reaction kinetics in flow-through porous electrodes10.1016/j.elecom.2015.04.019 ↗
20. Aspects of electron transfer processes in vanadium redox-flow batteries10.1016/j.coelec.2019.10.003 ↗
21. Characterization of carbon felt electrodes for vanadium redox flow batteries—A pore network modeling approach10.1016/j.est.2018.11.014 ↗
22. Polarization curve measurements combined with potential probe sensing for determining current density distribution in vanadium redox-flow batteries10.1016/j.jpowsour.2016.01.011 ↗
23. Al-Fetlawi, H.A.-Z.A.-Y. (2010). Modelling and Simulation of All-Vanadium Redox Flow Batteries. [Ph.D. Thesis, University of Southampton].
24. Bhattarai, A., Whitehead, A., Schweiss, R., Scherer, G.G., Wai, N., Nguyen, T.D., Ghimire, P.C., and Hng, H.H. (2018, January 10–12). “Power Drop Effect (PDE)” in operation of a vanadium redox flow battery. Proceedings of the IFBF, Lausanne, Switzerland.
25. Equilibrium and Dynamic Absorption of Electrolyte Species in Cation/Anion Exchange Membranes of Vanadium Redox Flow Battery10.1002/cssc.201802522 ↗
26. The influence of free acid in VRFB electrolyte on “power drop” effect and thermally-induced degradation10.1002/ente.202000445 ↗
27. A complex four-point method for the evaluation of ohmic and faradaic losses within a redox flow battery single-cell10.1016/j.mex.2019.03.007 ↗
28. Menictas, C. (1993). The Preparation and Feasibilty Study of Vanadium Electrolytes Prepared from Intermediate Vanadium Compounds and the Investigation of the Kinetics for the Dissolution of V2O5 in Vanadium Solution. [Ph.D. Thesis, University of New South Wales].
29. Lallo, E., Khataee, A., and Lindström, R.W. (2022). Vanadium Redox Flow Battery Using Aemion™ Anion Exchange Membranes. Processes, 10.10.3390/pr10020270 ↗
30. Preparation and evaluation of composite membrane for vanadium redox battrey applications10.1016/0378-7753(92)85002-R ↗
31. A room-temperature activated graphite felt as the cost-effective, highly active and stable electrode for vanadium redox flow batteries10.1016/j.apenergy.2018.10.059 ↗
32. Dynamic modelling of the effects of ion diffusion and side reactions on the capacity loss for vanadium redox flow battery10.1016/j.jpowsour.2011.09.003 ↗
33. Evidence for redox reactions during vanadium crossover inside the nanoscopic water-body of Nafion 117 using X-ray absorption near edge structure spectroscopy10.1016/j.jpowsour.2020.229176 ↗
34. Species Uptake and Mass Transport in Membranes for Vanadium Redox Flow Batteries10.1016/j.electacta.2017.03.131 ↗
35. Copper nanoparticle-deposited graphite felt electrodes for all vanadium redox flow batteries10.1016/j.apenergy.2016.07.134 ↗
36. Agar, E. (2014). Species Transport Mechanisms Governing Crossover and Capacity Loss in Vanadium Redox Flow Batteries. [Ph.D. Thesis, Drexel University].
37. Selective anion exchange membranes for high coulombic efficiency vanadium redox flow batteries10.1016/j.elecom.2012.10.007 ↗
38. Zhao, N., Riley, H., Song, C., Jiang, Z., Tsay, K.-C., Neagu, R., and Shi, Z. (2021). Ex-Situ Evaluation of Commercial Polymer Membranes for Vanadium Redox Flow Batteries (VRFBs). Polymers, 13.10.3390/polym13060926 ↗
39. On the quantification of coulombic efficiency for vanadium redox flow batteries: Cutoff voltages vs. state-of-charge limits10.1016/j.elecom.2013.07.041 ↗
40. Broad temperature adaptability of vanadium redox flow battery-Part 3: The effects of total vanadium concentration and sulfuric acid concentration10.1016/j.electacta.2017.10.148 ↗
41. Membrane evaluation for vanadium flow batteries in a temperature range of −20–50 °C10.1016/j.memsci.2016.09.012 ↗
42. Coupled Membrane Transport Parameters for Ionic Species in All-Vanadium Redox Flow Batteries10.1016/j.electacta.2016.09.087 ↗
43. Ion-exchange composite membranes pore-filled with sulfonated poly(ether ether ketone) and Engelhard titanosilicate-10 for improved performance of vanadium redox flow batteries10.1016/j.jpowsour.2018.02.028 ↗
44. Evaluation of Perfluorinated Sulfonic Acid Membranes for Vanadium Redox10.1088/1757-899X/808/1/012026 ↗
45. A novel electrode-bipolar plate assembly for vanadium redox flow battery applications10.1016/j.jpowsour.2007.09.006 ↗
46. Highly hydroxylated carbon fibres as electrode materials of all-vanadium redox flow battery10.1016/j.carbon.2010.04.044 ↗
47. Microwave-treated graphite felt as the positive electrode for all-vanadium redox flow battery10.1016/j.jpowsour.2014.04.035 ↗
48. Modification of carbon paper via hydrothermal oxidation for vanadium redox battery10.3866/PKU.WHXB201204013 ↗
49. Hydrothermal ammoniated treatment of PAN-graphite felt for vanadium redox flow battery10.1007/s10008-011-1383-y ↗
50. Graphene-Based Electrodes in a Vanadium Redox Flow Battery Produced by Rapid Low-Pressure Combined Gas Plasma Treatments10.1021/acs.chemmater.1c00763 ↗
51. Lin, C.-H., Yang, M.-C., and Wei, H.-J. (2018). Method of Fabricating Separating Membrane of Flow Battery for Achieving Low Impedance and Low Permeability. (TW 201933654), TW Patent.
52. Zhao, L., Xiao, W., Liu, J., and Yan, C. (2016). Preparation of All-Vanadium Flow Battery with Low-Cost Composite Proton Exchange Membrane. (CN 106972185), CN Patent.
53. Concentration dependence of VO2+ crossover of Nafion for vanadium redox flow batteries10.1149/2.004306jes ↗
54. Hagedorn, N., Hoberecht, M.A., and Thaller, L.H. (1982). NASA Redox Cell Stack Shunt Current, Pumping Power, and Cell Performance Tradeoffs, National Aeronautics and Space Administration, Lewis Research Centre. DOE/NASA/12726-11 NASA TM-82686.10.2172/5231997 ↗