journal article·2023-11-27Open access

Recent Research Progress on All-Solid-State Mg Batteries

Jayaraman Pandeeswari, Gunamony Jenisha, Kumlachew Zelalem Walle, Masashi Kotobuki

Batteries· Volume 9· Issue 12

Abstract

Current Li battery technology employs graphite anode and flammable organic liquid electrolytes. Thus, the current Li battery is always facing the problems of low energy density and safety. Additionally, the sustainable supply of Li due to the scarce abundance of Li sources is another problem. An all-solid-state Mg battery is expected to solve the problems owing to non-flammable solid-state electrolytes, high capacity/safety of divalent Mg metal anode and high abundance of Mg sources; therefore, solid-state electrolytes and all-solid-state Mg batteries have been researched intensively last two decades. However, the realization of all-solid-state Mg batteries is still far off. In this article, we review the recent research progress on all-solid-state Mg batteries so that researchers can pursue recent research trends of an all-solid-state Mg battery. At first, the solid-state electrolyte research is described briefly in the categories of inorganic, organic and inorganic/organic composite electrolytes. After that, the recent research progress of all-solid-state Mg batteries is summarized and analyzed. To help readers, we tabulate electrode materials, experimental conditions and performances of an all-solid-state Mg battery so that the readers can find the necessary information at a glance. In the last, challenges to realize the all-solid-state Mg batteries are visited.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Hydrogen Storage and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Battery Research Center of Green Energy, Ming Chi University of Technology, 84 Gungjuan Rd., Taishan Dist., New Taipei City 24301, Taiwan

References (100+)

Show source-provided references
1. Before Li ion batteries10.1021/acs.chemrev.8b00422 ↗
2. 30 years of lithium-ion batteries10.1002/adma.201800561 ↗
3. 3D porous V2O5 architectures for high-rate lithium storage10.1016/j.jechem.2019.02.010 ↗
4. Micro-sized FeS2@FeSO4 core-shell composite for advanced lithium storage10.1016/j.jallcom.2019.151922 ↗
5. Building better batteries10.1038/451652a ↗
6. Ultimate limits to intercalation reactions for lithium batteries10.1021/cr5003003 ↗
7. Lithium metal anodes for rechargeable batteries10.1039/C3EE40795K ↗
8. Recent progress in constructing halogenated interfaces for highly stable lithium metal anodes10.1016/j.ensm.2022.10.054 ↗
9. Critical current densities for high-performance all-solid-state Li-metal batteries: Fundamentals mechanisms, interfaces materials and applications10.1021/acsenergylett.2c00003 ↗
10. Review on solid electrolytes for all-solid-state lithium-ion batteries10.1016/j.jpowsour.2018.08.029 ↗
11. Electrolyte based on easily synthesized, low cost triphenolate-borohydride salt for high performance Mg(TFSI)2-glyme rechargeable magnesium batteries10.1021/acsami.7b06022 ↗
12. Highly reversible Mg metal anodes enabled by interfacial liquid metal engineering for high-energy Mg-S batteries10.1016/j.ensm.2022.03.046 ↗
13. Self-diffusion barriers: Possible descriptors for dendrite growth in batteries10.1039/C8EE01448E ↗
14. Recent progress of ceramic electrolytes for post Li and Na batteries10.1142/S1793604721300036 ↗
15. Progress in retrospect of electrolytes for secondary magnesium batteries10.1016/j.ccr.2020.213478 ↗
16. Processing and properties of garnet-type Li7La3Zr2O12 ceramic electrolytes10.1002/smll.202205550 ↗
17. Garnet-type solid-state electrolytes: Materials, interfaces and batteries10.1021/acs.chemrev.9b00427 ↗
18. Solid state electrolytes for rechargeable magnesium-ion batteries: From structure to mechanism10.1002/smll.202106981 ↗
19. Solid-state post Li metal ion batteries: A sustainable forthcoming reality?10.1002/aenm.202100785 ↗
20. Research development on Sodium-ion batteries10.1021/cr500192f ↗
21. Interfacial modification of Na3Zr2Si2PO12 solid electrolyte by femtosecond laser etching10.1007/s11581-022-04870-3 ↗
22. Na superionic conductor-type LiZr2(PO 4)3 as a promising solid electrolyte for use in all-solid-state Li metal batteries10.1039/D2CC01526A ↗
23. Li-ion conductivity of NASICON-type Li1+2xZr2-xCax(PO4)3 solid electrolyte prepared by spark plasma sintering10.1016/j.jallcom.2021.158641 ↗
24. Preparation of Li1.3Al0.3Ti1.7(PO4)3 solid electrolyte via a sol-gel method using various Ti Sources10.1080/21870764.2020.1793876 ↗
25. Preparation of Li1.5Al0.5Ti1.5(PO4)3 solid electrolyte via a sol-gel route using various Al sources10.1016/j.ceramint.2012.10.206 ↗
26. Ceramic-glass pellet thickness and Li diffusion in NASICON-type LAGP (Li1.5Al0.5Ge1.5(PO4)3) studied by pulsed field gradient NMR spectroscopy10.1016/j.ssi.2022.115924 ↗
27. A solid-liquid composite electrolyte with a vertical microporous Li1.5Al0.5Ge1.5(PO4)3 skeleton that prepared by femtosecond laser structuring and filled with ionic liquid10.1016/j.matchemphys.2022.126265 ↗
28. Synthesis and characterization of divalent ion conductors with NASICON-type structures10.1080/21870764.2019.1606141 ↗
29. A novel NASICON-based glass-ceramic composite electrolyte with enhanced Na-ion conductivity10.1016/j.ensm.2019.04.009 ↗
30. Solid electrolytes with multivalent cation conduction. 1. Conducting species in MgZrPO4 system10.1016/0167-2738(87)90091-9 ↗
31. Computational investigation of the Mg-ion conductivity and phase stability of MgZr4(PO4)610.1039/C9RA00513G ↗
32. High temperature 31P NMR study on Mg2+ ion conductors10.1016/S0038-1098(01)00386-6 ↗
33. Studies on structural and electrical properties of Mg0.5+y(Zr2-yFey)2(PO4)3 ceramic electrolytes10.1007/s11581-015-1623-8 ↗
34. Highly conducting divalent Mg2+ cation solid electrolytes with well-ordered three-dimensional network structure10.1016/j.jssc.2015.12.008 ↗
35. Structural and electrical properties of novel Mg0.9+0.5yZn0.4AlyZr1.6-y(PO4)3 ceramic electrolytes synthesized via nitrate sol-gel method10.1007/s10971-016-4091-3 ↗
36. Effect of sintering temperature on the structural, electrical and electrochemical properties of novel Mg0.5Si2(PO4)3 ceramic electrolytes10.1016/j.ceramint.2015.11.131 ↗
37. Aromic layer deposition of a magnesium phosphate solid electrolyte10.1021/acs.chemmater.9b01299 ↗
38. Novel Mg-ion conductive oxide of μ-cordierite Mg0.6Al1.2Si1.8O610.1080/14686996.2020.1730237 ↗
39. High ion conductivity in MgHf(WO4)3 solids with ordered structure: 1-D alignments of Mg2+ and Hf4+ ions10.1111/j.1551-2916.2011.04644.x ↗
40. Fe-P-S electrodes for all-solid-state lithium secondary batteries using sulfide-based solid electrolytes10.1016/j.jpowsour.2019.227576 ↗
41. Preparation of magnesium ion conducting MgS-P2S5-MgI2 glasses by a mechanochemical technique10.1016/j.ssi.2013.10.037 ↗
42. High magnesium mobility in ternary spinel chalcogenides10.1038/s41467-017-01772-1 ↗
43. Preparation of Y-doped Li7La3Zr2O12 by co-precipitation method10.1007/s11581-022-04489-4 ↗
44. MgSc2Se4-magnesium solid ionic conductor for all-solid-state Mg batteries?10.1002/cssc.201900225 ↗
45. Revealing and excluding the root cause of the electronic conductivity in Mg-ion MgSc2Se4 solid electrolyte10.1016/j.apmt.2021.100998 ↗
46. MgSc2Se4 solid electrolyte for rechargeable Mg batteries: An electric field-assisted all-solid-state synthesis10.1002/ente.202200896 ↗
47. Flash sintering of Li-ion conducting ceramic in a few seconds at 850 °C10.1016/j.scriptamat.2019.06.038 ↗
48. Boron group element doping of Li1.5Al0.5Ge1.5(PO4)3 based on microwave sintering10.1007/s10008-020-04829-2 ↗
49. A general method to synthesize and sinter bulk ceramics in seconds10.1126/science.aaz7681 ↗
50. Characterization of Mg0.5Zr2(PO4)3 for potential use as electrolyte in solid state magnesium batteries10.1016/j.ceramint.2014.05.013 ↗
51. Novel sol-gel synthesis of MgZr4P6O24 composite solid electrolyte and newer insight into the Mg2+-ion conducting properties using impedance spectroscopy10.1021/acs.jpcc.6b05036 ↗
52. Divalent magnesium ion conducting characteristics in phosphate based solid electrolyte composites10.1039/a909599c ↗
53. Optimization of divalent magnesium ion conduction in phosphate based polycrystalline solid electrolytes10.1007/BF02373581 ↗
54. Processing liquid-feed flame spray pyrolysis synthesized Mg0.5Ce0.2Zr1.8(PO4)3 nanopowders to free standing thin films and pellets as potential electrolytes in all-solid-state Mg batteries10.1016/j.electacta.2018.04.015 ↗
55. High-temperature conductivity measurements of magnesium-ion-conducting solid oxide Mg0.5-x(Zr1-xNbx)2(PO4)3 (x = 0.15) using Mg metal electrodes10.1149/2.1691709jes ↗
56. Characteristics of new Mg0.5(Zr1-xSnx)2(PO4)3 NASICON structured compound as solid electrolytes10.1016/j.ceramint.2020.07.313 ↗
57. Divalent magnesium ionic conduction in Mg1-2x(Zr1-xNbx)4P6O24 (x = 0-0.4) solid solutions10.1149/1.1391138 ↗
58. Processing combustion synthesized Mg0.5Zr2(PO4)3 nanopowders to thin films as potential solid electrolytes10.1016/j.elecom.2020.106753 ↗
59. Effects of Mg2+ interstitial ion on the properties of Mg0.5+x/2Si2-xAlx(PO4)3 ceramic electrolytes10.1016/j.jma.2017.09.005 ↗
60. Sol-gel synthesis and characterization of β-MgSO4: Mg(NO3)2-MgO composite solid electrolyte10.1007/s11581-016-1854-3 ↗
61. Sodium and magnesium ionic conduction in comlex hydrides10.1016/j.jallcom.2013.01.058 ↗
62. A novel inorganic solid state ion conductor for rechargeable Mg batteries10.1039/C3CC47097K ↗
63. Investigation of Mg(BH4)(NH2)-based composite materials with enhanced Mg2+ ionic conductivity10.1021/acs.jpcc.9b00616 ↗
64. Magnesium ethylenediamine borohydride as solid-state electrolyte for magnesium batteries10.1038/srep46189 ↗
65. Magnesium borohydride ammonia borane as a magnesium ionic conductor10.1021/acsaem.0c00113 ↗
66. Facile self-forming superionic conductors based on complex borohydride surface oxidation
67. Oxygen vacancies boosted fast Mg2+ migration in solids at room temperature10.1016/j.ensm.2022.07.012 ↗
68. Fast room-temperature Mg2+ conductivity in Mg(BH4)2∙1.6NH3-Al2O3 nanocomposites10.1021/acs.jpclett.2c00136 ↗
69. Ammine magnesium borohydride nanocomposites for all-solid-state magnesium batteries10.1021/acsaem.0c01599 ↗
70. Towards solid-state magnesium batteries: Ligand-assisted superionic conductivity10.1002/batt.202200163 ↗
71. Mg3(BH4)4(NH2)2 as inorganic solid electrolyte with high Mg2+ ionic conductivity10.1021/acsaem.0c00980 ↗
72. Pang, Y., Nie, Z., Xu, F., Sun, L., Yang, J., Sun, D., Fang, F., and Zheng, S. (2022). Borohydride ammoniate solid electrolyte design for all-solid-state Mg batteries. Energy Environ. Mater., e12527.10.1002/eem2.12527 ↗
73. Highly electroconductive metal-organic framework: Tunable by metal ion sorption quantity10.1021/jacs.9b04173 ↗
74. Inclusion and dynamics of a polymer-Li salt complex in coordination nanochannels10.1039/c0cc04799f ↗
75. Mixed metal-organic frameworks as efficient semi-solid electrolytes for magnesium-ion batteries10.1002/batt.202200260 ↗
76. Ionic liquid-incorporated metal-organic framework with high magnesium ion conductivity for quasi-solid-state magnesium batteries10.1002/batt.202200318 ↗
77. Design of metal-organic frameworks for improving pseudo-solid-state magnesium-ion electrolytes: Open metal sites, isoreticular expansion and framework topology10.1016/j.jmst.2022.09.058 ↗
78. A metal-organic framework thin film for selective Mg2+ transport10.1002/anie.201908706 ↗
79. Metal-organic frameworks as solid magnesium electrolytes10.1039/c3ee43143f ↗
80. Single-ion Li+, Na+ and Mg2+ solid electrolytes supported by a mesoporous anionic Cu-azolate metal-organic framework10.1021/jacs.7b06197 ↗
81. High Li+ and Mg2+ conductivity in a Cu-azolate metal-organic framework10.1021/jacs.8b13418 ↗
82. Super Mg2+ conductivity around 10-3 S cm-1 observed in a porous metal-organic framework10.1021/jacs.2c01612 ↗
83. Fast Magnesium Conductiong Electrospun Solid Polymer Electrolyte10.1002/batt.202200285 ↗
84. Ion pair formation and its effect in PEO:Mg solid polymer electrolyte system10.1016/S0378-7753(02)00084-8 ↗
85. Spectroscopic and electrochemical properties of PVP based polymer electrolyte films10.1007/s00289-017-2229-2 ↗
86. Preparation and dielectric properties of PVP-based polymer electrolyte films for solid-state battery application10.1007/s00289-017-2072-5 ↗
87. Electrical characterization of PVA-MgSO4 and PVA-Li2SO4 polymer salt composite electrolytes10.1016/j.matpr.2019.02.195 ↗
88. Activation energy dependence on doping concentration in PVA-MgCl2 composites10.1016/j.matpr.2022.08.469 ↗
89. Modifying potato starch by glutaraldehyde and MgCl2 for developing an economical and environment-friendly electrolyte system10.1515/epoly-2019-0047 ↗
90. Solium alginate incorporated with magnesium nitrate as a novel solid biopolymer electrolyte for magnesium-ion batteries10.1007/s10854-021-06713-9 ↗
91. Novel solid biopolymer electrolyte based on methyl cellulose with enhanced ion transport properties10.1002/app.51826 ↗
92. Preparation and characterization of biopolymer electrolyte based on gellan gum with magnesium perchlorate for magnesium battery10.1007/s11581-022-04597-1 ↗
93. Characterization of a natural rubber based solid polymer electrolyte to be used for a magnesium rechargeable cell10.1007/s00289-021-03749-z ↗
94. Preparation and characterization of polymer electrolyte based on biopolymer I-Carrageenen with magnesium nitrate10.1016/j.ssi.2018.10.031 ↗
95. Ali, N.I., Abidin, S.Z.Z., Majid, S.R., and Jaafar, N.K. (2021). Role of Mg(NO3)2 as defective agent in ameliorating the electrical conductivity, structural and electrochemical properties of agarose-based polymer electrolytes. Polymers, 13.10.3390/polym13193357 ↗
96. Magnesium ion-conducting solid polymer electrolyte based on cellulose acetate with magnesium nitrate (Mg(NO3)2•6H2O) for electrochemical studies10.1007/s11581-020-03615-4 ↗
97. Preparation and characterization of biopolymer K-carrageenan with MgCl2 and its application to electrochemical devices10.1007/s11581-019-03193-0 ↗
98. The compatibility of chitosan with divalent salts over monovalent salts for the preparation of solid polymer10.1016/j.rinp.2018.10.040 ↗
99. Characterization of solid biopolymer electrolytes based on kappa-carrageenan with magnesium nitrate hexahydrate and its application to electrochemical devices
100. An insight into the suitability of magnesium ion-conducting biodegradable methyl cellulose solid polymer electrolyte film in energy storage devices10.1007/s10853-023-08355-0 ↗