A K-Value Dynamic Detection Method Based on Machine Learning for Lithium-Ion Battery Manufacturing
Source abstract
Abstract
During the manufacturing process of the lithium-ion battery, metal foreign matter is likely to be mixed into the battery, which seriously influences the safety performance of the battery. In order to reduce the outflow of such foreign matter defect cells, the production line universally adopted the K-value test process. In the traditional K-value test, the detection threshold is determined empirically, which has poor dynamic characteristics and probably leads to missing or false detection. Based on comparing the screening effect of different machine learning algorithms for the production data of lithium-ion cells, this paper proposes a K-value dynamic screening algorithm for the cell production line based on the local outlier factor algorithm. The analysis results indicate that the proposed method can adaptively adjust the detection threshold. Furthermore, we validated its effectiveness through the metal foreign matter implantation experiment conducted in the pilot manufacturing line. Experiment results show that the proposed method’s detection rate is improved significantly. The increase in the detection rate of foreign matter defects is beneficial to improving battery quality and safety.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Battery Technologies Research · Fault Detection and Control Systems · Reliability and Maintenance Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Sichuan New Energy Vehicle Innovation Center Co., Ltd., Yibin 644000, China
School of Vehicle and Mobility, Tsinghua University, Beijing 100084, China
SVOLT Energy Technology Co., Ltd., Changzhou 213200, China
Dr. Octopus Intelligent Technology (Shanghai) Co., Ltd., Shanghai 201800, China
Funding
National Natural Science Foundation of China · China Postdoctoral Science Foundation · Science and Technology Project of Yibin Sanjiang New Area
References (43)
Show source-provided references
1. A Coupled Conjugate Heat Transfer and CFD Model for the Thermal Runaway Evolution and Jet Fire of 18650 Lithium-Ion Battery under Thermal Abuse10.1016/j.etran.2022.100157 ↗
2. Comprehensively Analysis the Failure Evolution and Safety Evaluation of Automotive Lithium Ion Battery10.1016/j.etran.2021.100140 ↗
3. Fire and Explosion Characteristics of Vent Gas from Lithium-Ion Batteries after Thermal Runaway: A Comparative Study10.1016/j.etran.2022.100190 ↗
4. Thermal Runaway and Fire of Electric Vehicle Lithium-Ion Battery and Contamination of Infrastructure Facility10.1016/j.rser.2022.112474 ↗
5. A Review of Lithium Ion Battery Failure Mechanisms and Fire Prevention Strategies10.1016/j.pecs.2019.03.002 ↗
6. Lai, X., Yao, J., Jin, C., Feng, X., Wang, H., Xu, C., and Zheng, Y. (2022). A Review of Lithium-Ion Battery Failure Hazards: Test Standards, Accident Analysis, and Safety Suggestions. Batteries, 8.10.3390/batteries8110248 ↗
7. Combustion Characteristics of Lithium–Iron–Phosphate Batteries with Different Combustion States10.1016/j.etran.2021.100148 ↗
8. Investigating the Relationship between Heating Temperature and Thermal Runaway of Prismatic Lithium-Ion Battery with LiFePO4 as Cathode10.1016/j.energy.2022.124714 ↗
9. Determining the Effects of Non-Catastrophic Nail Puncture on the Operational Performance and Service Life of Small Soft Case Commercial Li-Ion Prismatic Cells10.1016/j.etran.2021.100109 ↗
10. Influences of Multi Factors on Thermal Runaway Induced by Overcharging of Lithium-Ion Battery10.1016/j.jechem.2022.03.011 ↗
11. Foreign Matter Defect Battery and Sudden Spontaneous Combustion10.1016/j.etran.2022.100170 ↗
12. Identifying Degradation Mechanisms in Lithium-Ion Batteries with Coating Defects at the Cathode10.1016/j.apenergy.2018.09.073 ↗
13. The Role of Structural Defects in Commercial Lithium-Ion Batteries10.1016/j.xcrp.2021.100554 ↗
14. Autonomous Visual Detection of Defects from Battery Electrode Manufacturing10.1002/aisy.202200142 ↗
15. “See” the Invisibles: Inspecting Battery Separator Defects via Pressure Drop10.1016/j.ensm.2018.08.017 ↗
16. Electrode Alignment: Ignored but Important Design Parameter in Assembling Coin-Type Full Lithium-Ion Cells10.1149/1945-7111/ac4f23 ↗
17. Internal Short Circuit Mechanisms, Experimental Approaches and Detection Methods of Lithium-Ion Batteries for Electric Vehicles: A Review10.1016/j.rser.2021.110790 ↗
18. Diagnosis Method to Detect the Incorporation of Metallic Particles in a Lithium Ion Battery10.1149/06802.0059ecst ↗
19. Grabow, J., Klink, J., Benger, R., Hauer, I., and Beck, H.-P. (2022). Particle Contamination in Commercial Lithium-Ion Cells—Risk Assessment with Focus on Internal Short Circuits and Replication by Currently Discussed Trigger Methods. Batteries, 9.10.3390/batteries9010009 ↗
20. A Comprehensive Research on Internal Short Circuits Caused by Copper Particle Contaminants on Cathode in Lithium-Ion Batteries10.1016/j.etran.2022.100183 ↗
21. Effect of Electrode Manufacturing Defects on Electrochemical Performance of Lithium-Ion Batteries: Cognizance of the Battery Failure Sources10.1016/j.jpowsour.2016.02.007 ↗
22. Early Stage Internal Short Circuit Fault Diagnosis for Lithium-Ion Batteries Based on Local-Outlier Detection10.1016/j.est.2022.106196 ↗
23. Detecting the Internal Short Circuit in Large-Format Lithium-Ion Battery Using Model-Based Fault-Diagnosis Algorithm10.1016/j.est.2018.04.020 ↗
24. A Novel Al–Cu Internal Short Circuit Detection Method for Lithium-Ion Batteries Based on on-Board Signal Processing10.1016/j.est.2022.104748 ↗
25. Evaluating the Manufacturing Quality of Lithium Ion Pouch Batteries10.1149/1945-7111/ac6539 ↗
26. A Review of Research Needs in Nondestructive Evaluation for Quality Verification in Electric Vehicle Lithium-Ion Battery Cell Manufacturing10.1016/j.jpowsour.2023.232742 ↗
27. Ultrasonic Tomography Study of Metal Defect Detection in Lithium-Ion Battery10.3389/fenrg.2021.806929 ↗
28. Influence of Metallic Contaminants on the Electrochemical and Thermal Behavior of Li-Ion Electrodes10.1016/j.jpowsour.2021.230760 ↗
29. Fault and Defect Diagnosis of Battery for Electric Vehicles Based on Big Data Analysis Methods10.1016/j.apenergy.2017.05.139 ↗
30. Fault Diagnosis Method for Lithium-Ion Batteries in Electric Vehicles Based on Isolated Forest Algorithm10.1016/j.est.2022.104177 ↗
31. Samanta, A., Chowdhuri, S., and Williamson, S.S. (2021). Machine Learning-Based Data-Driven Fault Detection/Diagnosis of Lithium-Ion Battery: A Critical Review. Electronics, 10.10.3390/electronics10111309 ↗
32. Self-Discharge Prediction Method for Lithium-Ion Batteries Based on Improved Support Vector Machine10.1016/j.est.2022.105571 ↗
33. Self-Discharge Losses in Lithium-Ion Cells10.1109/MAES.2004.1269687 ↗
34. Investigation of Self-Discharge Properties and a New Concept of Open-Circuit Voltage Drop Rate in Lithium-Ion Batteries10.1007/s10008-021-05049-y ↗
35. Isolation-Based Anomaly Detection10.1145/2133360.2133363 ↗
36. A Parallel Algorithm for Network Traffic Anomaly Detection Based on Isolation Forest10.1177/1550147718814471 ↗
37. An In-Depth Study and Improvement of Isolation Forest10.1109/ACCESS.2022.3144425 ↗
38. Fault Detection and Diagnosis in Process Data Using One-Class Support Vector Machines10.1016/j.jprocont.2009.07.011 ↗
39. Estimating the Support of a High-Dimensional Distribution10.1162/089976601750264965 ↗
40. Huang, G., Chen, J., and Liu, L. (2023). One-Class SVM Model-Based Tunnel Personnel Safety Detection Technology. Appl. Sci., 13.10.3390/app13031734 ↗
41. Breunig, M.M., Kriegel, H.-P., Ng, R.T., and Sander, J. (2000, January 15–18). LOF: Identifying Density-Based Local Outliers. Proceedings of the 2000 ACM SIGMOD International Conference on Management of Data, Dallas, TX, USA.10.1145/342009.335388 ↗
42. Fault Diagnosis Method for Lithium-Ion Batteries in Electric Vehicles Using Generalized Dimensionless Indicator and Local Outlier Factor10.1016/j.est.2022.104963 ↗
43. Boxplot Fences in Proficiency Testing10.1007/s00769-021-01474-8 ↗