journal article·2023-04-22Open access

Thermal and Mechanical Safety Assessment of Type 21700 Lithium-Ion Batteries with NMC, NCA and LFP Cathodes–Investigation of Cell Abuse by Means of Accelerating Rate Calorimetry (ARC)

Sebastian Ohneseit, Philipp Finster, Claire Floras, Niklas Lubenau, Nils Uhlmann, Hans Jürgen Seifert, Carlos Ziebert

Batteries· Volume 9· Issue 5

Abstract

In this experimental investigation, we studied the safety and thermal runaway behavior of commercial lithium-ion batteries of type 21700. The different cathode materials NMC, NCA and LFP were compared, as well as high power and high energy cells. After characterization of all relevant components of the batteries to assure comparability, two abuse methods were applied: thermal abuse by the heat-wait-seek test and mechanical abuse by nail penetration, both in an accelerating rate calorimeter. Several critical temperatures and temperature rates, as well as exothermal data, were determined. Furthermore, the grade of destruction, mass loss and, for the thermal abuse scenario, activation energy and enthalpy, were calculated for critical points. It was found that NMC cells reacted first, but NCA cells went into thermal runaway a little earlier than NMC cells. LFP cells reacted, as expected, more slowly and at significantly higher temperatures, making the cell chemistry considerably safer. For mechanical abuse, no thermal runaway was observed for LFP cells, as well as at state of charge (SOC) zero for the other chemistries tested. For thermal abuse, at SOC 0 and SOC 30 for LFP cells and at SOC 0 for the other cell chemistries, no thermal runaway occurred until 350 °C. In this study, the experimental data are provided for further simulation approaches and system safety design.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Battery Technologies Research · Advancements in Battery Materials · Extraction and Separation Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Karlsruhe Institute of Technology (KIT), Institute for Applied Materials-Applied Materials Physics (IAM-AWP), Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen, Germany

Department of Physics, Engineering Physics & Astronomy, Queen’s University, 64 Bader Lane, Kingston, ON K7L 3N6, Canada

Funding

Helmholtz Association · German Federal Ministry of Education and Research (BMBF) · Projektträger Jülich (PTJ)

References (33)

Show source-provided references
1. Cathode material comparison of thermal runaway behavior of Li-ion cells at different state of charges including over charge10.1016/j.jpowsour.2015.01.143 ↗
2. Zhao, W., Rohde, M., Mohsin, I.U., Ziebert, C., Du, Y., and Seifert, H.J. (2022). Combined Thermal Runaway Investigation of Coin Cells with an Accelerating Rate Calorimeter and a Tian-Calvet Calorimeter. Batteries, 8.10.3390/batteries8020015 ↗
3. Analysis on Thermal Runaway Behavior of Prismatic Lithium-Ion Batteries with Autoclave Calorimetry10.1149/1945-7111/ac3c27 ↗
4. Pursuing safer batteries: Thermal abuse of LiFePO4 cells10.1016/j.jpowsour.2019.01.013 ↗
5. Characterization on thermal runaway of commercial 18650 lithium-ion batteries used in electric vehicles: A review10.1016/j.est.2021.102888 ↗
6. Electrical safety of commercial Li-ion cells based on NMC and NCA technology compared to LFP technology10.3390/wevj6030572 ↗
7. Larsson, F., Andersson, P., and Mellander, B.E. (2016). Lithium-Ion Battery Aspects on Fires in Electrified Vehicles on the Basis of Experimental Abuse Tests. Batteries, 2.10.3390/batteries2020009 ↗
8. Characterization of Thermally Induced Runaway in Pouch Cells for Propagation10.1007/s10694-020-00974-2 ↗
9. Thermal runaway features of large format prismatic lithium ion battery using extended volume accelerating rate calorimetry10.1016/j.jpowsour.2014.01.005 ↗
10. Li, L., Ju, X., Zhou, X., Peng, Y., Zhou, Z., Cao, B., and Yang, L. (2021). Experimental Study on Thermal Runaway Process of 18650 Lithium-Ion Battery under Different Discharge Currents. Materials, 14.10.3390/ma14164740 ↗
11. Experimental study on the runaway behaviors of Panasonic 21,700 LiNi0.8Co0.15Al0.05O2 battery used in electric vehicle under thermal failure10.1007/s10973-022-11394-5 ↗
12. Comparative study on thermal runaway of commercial 14500, 18650 and 26650 LiFePO4 batteries used in electric vehicles10.1016/j.est.2020.101580 ↗
13. Thermal runaway mechanism of lithium ion battery for electric vehicles: A review
14. Liquid-Solid Phase Diagrams of Ternary and Quaternary Organic Carbonates10.1149/1.1690782 ↗
15. Thermal runaway of commercial 18650 Li-ion batteries with LFP and NCA cathodes—Impact of state of charge and overcharge10.1039/C5RA05897J ↗
16. Ziegler, A., Oeser, D., Hein, T., Montesinos-Miracle, D., and Ackva, A. (2020). Run to Failure: Aging of Commercial Battery Cells beyond Their End of Life. Energies, 13.10.3390/en13081858 ↗
17. Concept for the Analysis of the Electrolyte Composition within the Cell Manufacturing Process: From Sealing to Sample Preparation10.1002/ente.201801081 ↗
18. Heat capacity of aluminum from 80 to 880 K10.1016/0040-6031(89)87016-9 ↗
19. Rodriguez-Martinez, L.M., and Omar, N. (2017). Emerging Nanotechnologies in Rechargeable Energy Storage Systems, Elsevier.
20. Accelerating Rate Calorimetry Study on the Thermal Stability of Lithium Intercalated Graphite in Electrolyte10.1149/1.1391893 ↗
21. Thermal hazard evaluation by an accelerating rate calorimeter10.1016/0040-6031(80)85001-5 ↗
22. Single heating rate methods are a faulty approach to pyrolysis kinetics
23. Al-Zareer, M., Michalak, A., Escobar, C., Da Silva, C.M., Davis, T., Osio, I., and Amon, C.H. (2022). Heat Generation Rates and Anisotropic Thermophysical Properties of Cylindrical Lithium-Ion Batteries with Different Terminal Mounting Configurations. SSRN J.10.2139/ssrn.4102553 ↗
24. Thermal-electrochemical parameters of a high energy lithium-ion cylindrical battery10.1016/j.electacta.2022.140700 ↗
25. Experimental study of battery passive thermal management system using copper foam-based phase change materials
26. Experimental study on the vertical thermal runaway propagation in cylindrical Lithium-ion batteries: Effects of spacing and state of charge10.1016/j.applthermaleng.2021.117399 ↗
27. Predicting specific heat capacity and directional thermal conductivities of cylindrical lithium-ion batteries: A combined experimental and simulation framework
28. Determination of the through-plane thermal conductivity and specific heat capacity of a Li-ion cylindrical cell10.1016/j.ijheatmasstransfer.2020.120330 ↗
29. Numerical Study on Thermal Runaway by Temperatures and Appearance Sizes in NCM622 and LFP Cylindrical Lithium-ion Batteries
30. Methodology to determine the heat capacity of lithium-ion cells10.1016/j.jpowsour.2018.05.084 ↗
31. Linstrom, P. (1997). NIST Chemistry WebBook, National Institute of Standards and Technology.
32. Properties of PC-EA Solvent and Its Solution of LiBOB Comparison of Linear Esters to Linear Carbonates for Use in Lithium Batteries10.1149/1.1914757 ↗
33. The Role of Electrolyte Additives on the Interfacial Chemistry and Thermal Reactivity of Si-Anode-Based Li-Ion Battery10.1021/acsaem.9b01094 ↗