Towards an Ultimate Battery Thermal Management System: A Review
Source abstract
Abstract
The prevailing standards and scientific literature offer a wide range of options for the construction of a battery thermal management system (BTMS). The design of an innovative yet well-functioning BTMS requires strict supervision, quality audit and continuous improvement of the whole process. It must address all the current quality and safety (Q&S) standards. In this review article, an effective battery thermal management is sought considering the existing battery Q&S standards and scientific literature. The article contains a broad overview of the current existing standards and literature on a generic compliant BTMS. The aim is to assist in the design of a novel compatible BTMS. Additionally, the article delivers a set of recommendations to make an effective BTMS.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Battery Technologies Research · Advanced Battery Materials and Technologies · Advancements in Battery Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Energy Technology, Aalborg University, Pontoppidanstræde 101, Aalborg DK-9220, Denmark
Funding
Danish Strategic Research Council
References (100+)
Show source-provided references
1. Manganese type lithium ion battery for pure and hybrid electric vehicles10.1016/S0378-7753(01)00599-7 ↗
2. A simulation on safety of LiFePO4/C cell using electrochemical-thermal coupling model10.1016/j.jpowsour.2013.03.100 ↗
3. Thermal studies of a lithium-ion battery10.1016/S0378-7753(96)02583-9 ↗
4. Heat-transfer phenomena in lithium polymer-electrolyte batteries for electric vehicle application10.1149/1.2220724 ↗
5. Pesaran, A.A., Swan, D., Olson, J., Guerin, J.T., Burch, S., Rehn, R., and Skellenger, G.D. (1998, January 1–3). Thermal analysis and performance of a battery pack for a hybrid electric vehicle. Proceedings of the 15th International Electric Vehicle Symposium, Brussels, Belgium.
6. Xiao, H., Shaohua, L., and Stanton, S. (2010, January 12–16). A novel thermal model for HEV/EV battery modeling based on CFD calculation. Proceedings of the 2010 IEEE Energy Conversion Congress and Exposition (ECCE), Atlanta, GA, USA.
7. Heat transfer in phase change materials for thermal management of electric vehicle battery modules10.1016/j.ijheatmasstransfer.2010.07.044 ↗
8. Effects of entropy changes in anodes and cathodes on the thermal behavior of lithium ion batteries10.1016/j.jpowsour.2008.10.078 ↗
9. Effect of entropy change of lithium intercalation in cathodes and anodes on Li-ion battery thermal management10.1016/j.jpowsour.2009.11.103 ↗
10. Lin, C., Chen, K., Sun, F.C., Tang, P., and Zhao, H.W. (2009, January 7–10). Research on thermo-physical properties identification and thermal analysis of EV Li-ion battery. Proceedings of the 2009 Vehicle Power and Propulsion Conference (VPPC), Dearborn, MI, USA.
11. Thermal model for a Li-ion cell10.1149/1.2817888 ↗
12. Cycling performance of LiFePO4 cathode material for lithium secondary batteries10.1016/j.jpowsour.2003.12.058 ↗
13. The limits of low-temperature performance of Li-ion cells10.1149/1.1393622 ↗
14. Ageing mechanisms in lithium-ion batteries10.1016/j.jpowsour.2005.01.006 ↗
15. Battery Safety Standards Committee (2013). Safety Standard for Electric and Hybrid Vehicle Propulsion Battery Systems Utilizing Lithium-Based Rechargeable Cells, Society of Automative Engineers (SAE) International.
16. Ghosh, D., Maguire, P.D., and Zhu, D.X. (2009). Design and CFD simulation of a battery module for a hybrid electric vehicle battery pack. SAE Tech. Pap.10.4271/2009-01-1386 ↗
17. Thermal model for lithium ion battery pack with mixed parallel and series configuration10.1149/1.3624836 ↗
18. International Organization for Standardization (2012). Electrically Propelled Road Vehicles—Test Specification for Lithium-Ion Traction Battery Packs and Systems—Part 2: High-Energy Applications, ISO.
19. International Organization for Standardization (2011). Electrically Propelled Road Vehicles—Test Specification for Lithium-Ion Traction Battery Packs and Systems—Part 1: High-Power Applications, ISO.
20. Battery Standards Testing Committee (2008). Electric Drive Battery Pack System Functional Guidelines (Revised 2008), Society of Automative Engineers (SAE) International.
21. Thermo-mechanical behaviors of the expanded graphite-phase change material matrix used for thermal management of Li-ion battery packs10.1016/j.jmatprotec.2009.07.011 ↗
22. International Electrotechnical Commission (IEC) (2002). Stationary Lead-Acid Batteries—Part 11: Vented Types—General Requirements and Methods of Tests, IEC. IEC 60896-11 Edition 1.0.
23. 3-dimensional thermal modeling of lithium-polymer batteries under galvanostatic discharge and dynamic power profile10.1149/1.2059263 ↗
24. AC-impedance measurements during thermal runaway process in several lithium/polymer batteries10.1016/S0378-7753(03)00248-9 ↗
25. Investigation of multidimensional electrothermal impedance spectroscopy measurement on lithium ion battery cell10.1149/07001.0305ecst ↗
26. International Electrotechnical Commission (IEC) (2013). Aircraft Batteries—Part 2: Design and Construction Requirements, IEC. IEC 60952-2 Edition 3.0.
27. Pesaran, A.A., Vlahinos, A., and Burch, S.D. (1997, January 15–17). Thermal performance of EV and HEV battery modules and packs. Proceedings of the 14th International Electric Vehicle Symposium, Orlando, FL, USA.
28. Khan, M.R., and Kær, S.K. (2015, January 14). Modeling thermal effects of battery cells inside electric vehicle battery packs. Proceedings of the 2015 Comsol Conference, Grenoble, France.
29. A critical review of thermal issues in lithium-ion batteries10.1149/1.3515880 ↗
30. Modeling efforts in the key areas of thermal management and safety of lithium ion battery cells: A mini review10.1002/apj.1999 ↗
31. Battery and battery management for hybrid electric vehicles: A review10.1007/s00502-006-0383-6 ↗
32. A review on the key issues for lithium-ion battery management in electric vehicles10.1016/j.jpowsour.2012.10.060 ↗
33. A review of power battery thermal energy management10.1016/j.rser.2011.07.096 ↗
34. A review of materials, heat transfer and phase change problem formulation for latent heat thermal energy storage systems (LHTESS)10.1016/j.rser.2009.10.015 ↗
35. Khan, M.R. (2017). Thermal Management of Battery Systems in Electric Vehicle and Smart Grid Application. [Ph.D. Thesis, Aalborg University].
36. Experimental performances of a battery thermal management system using a phase change material10.1016/j.jpowsour.2014.07.147 ↗
37. Novel battery thermal management system for greater lifetime ratifying current quality and safety standard
38. Simplified electrochemical and thermal model of liFePO4-graphite Li-ion batteries for fast charge applications10.1149/2.064209jes ↗
39. Khan, M.R., and Kær, S.K. (2016, January 6–8). Multiphysics based thermal modeling of a pouch lithium-ion battery cell for the development of pack level thermal management system. Proceedings of the 2016 Eleventh International Conference on Ecological Vehicles and Renewable Energies (EVER), Monte Carlo, Monaco.10.1109/EVER.2016.7476442 ↗
40. Khan, M.R., and Kaer, S.K. (2016, January 17–20). Three dimensional thermal modeling of Li-ion battery pack based on multiphysics and calorimetric measurement. Proceedings of the 2016 IEEE Vehicle Power and Propulsion Conference (VPPC), Hangzhou, China.10.1109/VPPC.2016.7791803 ↗
41. Khan, M.R., Swierczynski, M.J., and Kær, S.K. (2016, January 6–8). Determination of the behavior and performance of commercial Li-ion pouch cells by means of isothermal calorimeter. Proceedings of the 2016 Eleventh International Conference on Ecological Vehicles and Renewable Energies (EVER), Monte Carlo, Monaco.10.1109/EVER.2016.7476441 ↗
42. A novel thermal management system for electric vehicle batteries using phase-change material10.1149/1.1393888 ↗
43. Chen, Y.F., Song, L., and Evans, J.W. (, 1996). Modeling studies on battery thermal behaviour, thermal runaway, thermal management, and energy efficiency. Proceedings of the 1996 31st Intersociety Energy Conversion Engineering Conference (IECEC), Washington, DC, USA.
44. Mi, C., Ben, L., Buck, D., and Ota, N. (2007, January 9–12). Advanced electro-thermal modeling of lithium-ion battery system for hybrid electric vehicle applications. Proceedings of the 2007 IEEE Vehicle Power and Propulsion Conference (VPPC), Arlington, TX, USA.10.1109/VPPC.2007.4544108 ↗
45. Thermal analysis of lithium-ion batteries10.1016/j.jpowsour.2004.05.064 ↗
46. Cosley, M.R., and Garcia, M.P. (, 2004). Battery thermal management system. Proceedings of the INTELEC 26th Annual International Telecommunications Energy Conference, Chicago, IL, USA.
47. Heat dissipation design for lithium-ion batteries10.1016/S0378-7753(02)00048-4 ↗
48. Institute of Electrical and Electronics Engineers (1996). IEEE Recommended Practice for Installation Design and Installation of Valve-Regulated Lead-Acid Storage Batteries for Stationary Applications, IEEE. IEEE Standard 1187-1996.
49. Pesaran, A.A., and Keyser, K. (2001, January 9–12). Thermal characteristics of selected EV and HEV batteries. Proceedings of the 16th Annual Battery Conference: Applications and Advances, Long Beach, CA, USA.
50. Thermal/electrical modeling for abuse-tolerant design of lithium ion modules10.1002/er.1666 ↗
51. Multi-domain modeling of lithium-ion batteries encompassing multi-physics in varied length scales10.1149/1.3597614 ↗
52. Muratori, M., Ma, N., Canova, M., Guezennec, Y., and Asme (2010). A Model Order Reduction Method for the Temperature Estimation in a Cylindrical Li-Ion Battery Cell, American Society of Mechanical Engineers.10.1115/DSCC2010-4200 ↗
53. Battery thermal models for hybrid vehicle simulations10.1016/S0378-7753(02)00200-8 ↗
54. Institute of Electrical and Electronics Engineers (1998). IEEE Guide for the Protection of Stationary Battery Systems, IEEE. IEEE Standard 1375-1998.
55. Khan, M.R., Mulder, G., Van Mierlo, J., and Kær, S.K. (2013, January 4). The integration and control of multifunctional stationary pv-battery systems in smart distribution grid. Proceedings of the 28th European Photovoltaic Solar Energy Conference and Exhibition (EU PVSEC), Paris, France.
56. High-rate capability of lithium-ion batteries after storing at elevated temperature10.1016/j.electacta.2006.10.045 ↗
57. Thermal-electrochemical model for passive thermal management of a spiral-wound lithium-ion battery10.1016/j.jpowsour.2011.11.075 ↗
58. Thermal management of Li-ion battery with phase change material for electric scooters: Experimental validation10.1016/j.jpowsour.2004.09.033 ↗
59. Simulation of passive thermal management system for lithium-ion battery packs10.1016/j.jpowsour.2004.09.025 ↗
60. Active (air-cooled) vs. Passive (phase change material) thermal management of high power lithium-ion packs: Limitation of temperature rise and uniformity of temperature distribution10.1016/j.jpowsour.2008.03.082 ↗
61. Passive control of temperature excursion and uniformity in high-energy Li-ion battery packs at high current and ambient temperature10.1016/j.jpowsour.2008.04.050 ↗
62. Design and simulation of a lithium-ion battery with a phase change material thermal management system for an electric scooter10.1016/j.jpowsour.2003.09.070 ↗
63. Modeling thermal management of Lithium-ion PNGV batteries10.1016/S0378-7753(02)00197-0 ↗
64. Heating strategies for Li-ion batteries operated from subzero temperatures10.1016/j.electacta.2013.03.147 ↗
65. Keyser, M., Pesaran, A.A., Mihalic, A., and Zolot, M. (2000). Thermal Characterization of Advanced Battery Technologies for EV and HEV Applications, National Renewable Energy Laboratory (NREL).
66. Pesaran, A.A., Burch, S.D., and Keyser, M. (1999, January 24–27). An approach for designing thermal management systems for electric and hybrid vehicle battery pack. Proceedings of the 4th Vehicle Thermal Management Systems, London, UK.
67. Solid-state thermal management for lithium-ion EV batteries10.1109/TVT.2012.2214246 ↗
68. Review and recent advances in battery health monitoring and prognostics technologies for electric vehicle (EV) safety and mobility10.1016/j.jpowsour.2014.01.085 ↗
69. Assessing the reflectivity of residential grid tariffs for a user reaction through photovoltaics and battery storage10.1016/j.segan.2015.01.003 ↗
70. A review and probabilistic model of lifecycle costs of stationary batteries in multiple applications10.1016/j.rser.2013.04.023 ↗
71. Modeling discharge behavior of multicell battery10.1109/TEC.2010.2048904 ↗
72. Simulation of a thermal battery using Phoenics®10.1016/j.jpowsour.2007.11.084 ↗
73. An online framework for state of charge determination of battery systems using combined system identification approach10.1016/j.jpowsour.2013.07.092 ↗
74. Khan, M.R., Nielsen, M.P., and Kær, S.K. (2014, January 9). Feasibility study and techno-economic optimization model for battery thermal management system. Proceedings of the 55th Conference on Simulation and Modelling (SIMS 55), Modelling, Simulation and Optimization, Aalborg, Denmark.
75. Electrochemical-thermal modeling of automotive Li-ion batteries and experimental validation using a three-electrode cell10.1002/er.1652 ↗
76. Power quality and voltage stability of distribution system with distributed energy resources
77. International Electrotechnical Commission (IEC) (2010). Secondary Lithium-Ion Cells for the Propulsion of Electric Road Vehicles–Part 2: Reliability and Abuse Testing, IEC. IEC 62660-2 Edition 1.0.
78. International Electrotechnical Commission (IEC) (2013). Secondary Cells and Batteries for Renewable Energy Storage—General Requirements and Methods of Test—Part 1: Photovoltaic Off-Grid Application, IEC. IEC 61427-1 Edition 1.0.
79. International Electrotechnical Commission (IEC) (2011). Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes—Secondary Lithium Cells and Batteries for Portable Applications, IEC. IEC 61960 Edition 2.0.
80. International Electrotechnical Commission (IEC) (2012). Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes—Safety Requirements for Portable Sealed Secondary Cells, and for Batteries Made from Them, for Use in Portable Applications, IEC. IEC 62133 Edition 2.0.
81. Institute of Electrical and Electronics Engineers (2007). IEEE Recommended Practice for Stationary Battery Electrolyte Spill Containment and Management, IEEE. IEEE Standard 1578-2007.
82. International Electrotechnical Commission (IEC) (2007). Insulation Coordination for Equipment within Low-Voltage Systems—Part 1: Principles, Requirements and Tests, IEC. IEC 60664-1 Edition 2.0.
83. International Electrotechnical Commission (IEC) (2010). Safety Requirements for Secondary Batteries and Battery Installations—Part 2: Stationary Batteries, IEC. IEC 62485-2 Edition 1.0.
84. International Electrotechnical Commission (IEC) (2004). Stationary Lead-Acid Batteries—Part 21: Valve Regulated Types—Methods of Test, IEC. IEC 60896-21 Edition 1.0.
85. Safety mechanisms in lithium-ion batteries10.1016/j.jpowsour.2005.12.002 ↗
86. International Electrotechnical Commission (IEC) (2010). Safety Requirements for Secondary Batteries and Battery Installations—Part 3: Traction Batteries, IEC. IEC 62485-3 Edition 1.0.
87. Doughty, D.H. (2010). EV & HEV Rechargeable Energy Storage System (Ress) Safety and Abuse Testing Procedure, SAE International. SAE J2464.10.4271/2010-01-1077 ↗
88. A review of thermal performance improving methods of lithium ion battery: Electrode modification and thermal management system10.1016/j.jpowsour.2015.09.001 ↗
89. Toward real-time simulation of physics based lithium-ion battery models10.1149/1.2776128 ↗
90. Khan, M.R., Barreras, J.V., Stan, A.I., Swierczynski, M., Andreasen, S.J., and Kær, S.K. (2014). Hysteresis: Types, Applications and Behavior Patterns in Complex Systems, Nova Science Publishers.
91. Thermal modeling of secondary lithium batteries for electric vehicle/hybrid electric vehicle applications10.1016/S0378-7753(02)00196-9 ↗
92. Nonflammable electrolytes for Li-ion batteries based on a fluorinated phosphate10.1149/1.1490356 ↗
93. Lithium battery thermal models10.1016/S0378-7753(02)00198-2 ↗
94. A study of the overcharge reaction of lithium-ion batteries10.1016/S0378-7753(01)00598-5 ↗
95. Cooperative research on safety fundamentals of lithium batteries10.1016/S0378-7753(01)00732-7 ↗
96. Thermal stability of LiPF6-EC: EMC electrolyte for lithium ion batteries10.1016/S0378-7753(01)00746-7 ↗
97. The reaction of charged cathodes with nonaqueous solvents and electrolytes—I. Li0.5CoO210.1149/1.1407245 ↗
98. Thermal model of cylindrical and prismatic lithium-ion cells10.1149/1.1377592 ↗
99. On safety of lithium-ion cells10.1016/S0378-7753(99)00135-4 ↗
100. Development of a high-power lithium-ion battery10.1016/S0378-7753(99)00268-2 ↗