journal article·2025-09-09Open access

Numerical simulation of upper garment pieces-body under different ease allowances based on the finite element contact model

Tao Li, Kejun Cen, Fengyuan Zou, Huan Wu

AUTEX Research Journal· Volume 25· Issue 1

Abstract

Abstract The interval distribution under different ease allowances directly influences the dressing effect. However, the indistinct 3D dressing process and unclear interval distribution pose severe challenges to practical applications. Inspired by real-time acquisition, the finite element model based on contact theory (FECM) was proposed. First, we constructed a biomechanical body geometric model consisting of the torso and soft tissues. Meanwhile, the garment pieces with different ease allowances were also constructed. Then, the FECM was constructed to simulate the interactions. The dressing period was applied to acquire dressing states. Finally, the displacements and interval distribution under different ease allowances were acquired. The results demonstrated the effectiveness of the FECM. During dressing, the displacements of garment pieces mainly occurred in the full contact and equilibrium phases. Dynamic changes in the shoulder gradually increase from small displacements, while the opposite occurs in the waist and hem area. Meanwhile, the interval distribution followed back > front > side seam. As the ease allowance increases, the interval distribution dynamic shifts from the back to the front piece. The reason is that the back muscle gradually replaced the chest convex points in the supporting garment pieces. The findings could enhance the dressing effect under different ease allowances.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: 3D Shape Modeling and Analysis · Textile materials and evaluations · Human Motion and Animation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Fashion College, Zhejiang Sci-Tech University , Hangzhou , Zhejiang, 310018 , China

Key Laboratory of Silk Culture Inheriting and Products Design Digital Technology, Ministry of Culture and Tourism, Zhejiang Sci-Tech University , Hangzhou , Zhejiang, 310018 , China

Yuanpei College, Shaoxing University , Shaoxing , Zhejiang, 312000 , China

References (24)

Show source-provided references
1. Sakata, Y., Kim, K., Takatera, M. (2020). Suitable ranges of ease allowance for appearance of women’s shirts of fit and straight styles. International Journal of Clothing Science and Technology, 33(3), 448–464.10.1108/IJCST-03-2020-0031 ↗
2. Wang, R., Liu, Y., Luo, X., Li, Y., Ji, S. (2011). A finite-element mechanical contact model based on Mindlin–Reissner shell theory for a three-dimensional human body and garment. Journal of Computational and Applied Mathematics, 236, 867–877.10.1016/j.cam.2011.05.017 ↗
3. Ying, X. (2023). The relation between body surface angle and apparel ease distribution under the motion state. International Journal of Clothing Science and Technology, 35(2), 293–311.10.1108/IJCST-04-2022-0060 ↗
4. Liu, Z., He, Q., Zou, F. Y., Ding, Y., Xu, B. G. (2019). Apparel ease distribution analysis using three-dimensional motion capture. Textile Research Journal, 89(19–20), 4323–4335.10.1177/0040517519832842 ↗
5. Choi, K. H. (2022). 3D dynamic fashion design development using digital technology and its potential in online platforms. Fashion and Textiles, 9(9), 1–28.10.1186/s40691-021-00286-1 ↗
6. Ange, L., Kristina, A. (2019). Virtual try-on technologies in the clothing industry: Basic block pattern modification. International Journal of Clothing Science and Technology, 31(6), 729–740.10.1108/IJCST-11-2018-0140 ↗
7. Bartle, A., Sheffer, A., Kim, V. G., Kaufman, D. M., Vining, N., Berthouzoz, F. (2016). Physics-driven pattern adjustment for direct 3D garment editing. ACM Transactions on Graphics, 35(4), 1–11.10.1145/2897824.2925896 ↗
8. Ionesi, S. D., Ciobanu, L., Dumitras, C., Avadanei, M., Dulgheriu, I., Ionescu, I., et al. (2021). FEM analysis of textile reinforced composite materials impact behavior. Materials (Basel), 14(23), 7380.10.3390/ma14237380 ↗
9. Zhang, S., Yick, K. l, Chen, L., Yu, W., Lau, N., Sun, Y. (2020). Finite-element modelling of elastic woven tapes for bra design applications. The Journal of The Textile Institute, 111(10), 1470–1480.10.1080/00405000.2019.1704962 ↗
10. Ghorbani, E., Hasani, H., Nedoushan, R. J., Jamshidi, N. (2020). Finite element modeling of the compression garments structural effect on the pressure applied to leg. Fibers and Polymers, 21(3), 636–645.10.1007/s12221-020-9542-3 ↗
11. Dan, R., Shi, Z. (2021). Dynamic simulation of the relationship between pressure and displacement for the waist of elastic pantyhose in the walking process using the finite element method. Textile Research Journal, 91(13–14), 1497–1508.10.1177/0040517520981741 ↗
12. Dan, R., Shi, Z. (2019). Dynamic simulation on the area shrinkage of lower leg for the top part of men’s socks using finite element method. The Journal of The Textile Institute, 110(4), 543–551.10.1080/00405000.2018.1499185 ↗
13. Yu, A., Yick, K. L., Ng, S. P., Yip, J., Chan, Y. F. (2016). Numerical simulation of pressure therapy glove by using finite element method. Burns, 42(1), 141–151.10.1016/j.burns.2015.09.013 ↗
14. Liang, R. X., Yip, J., Yu, W. N., Chen, L. H., Lau, N. (2019). Numerical simulation of nonlinear material behaviour: Application to sports bra design. Materials and Design, 183, 108177.10.1016/j.matdes.2019.108177 ↗
15. Liang, R. X., Yip, J., Yu, W. N., Chen, L.H., Lau, N. (2020). Computational modelling methods for sports bra-body interactions. International Journal of Clothing Science and Technology, 35(2), 293–311.
16. Yu, Y.K., Sun, Y., Hou, J., Liu, Z., Yick, K. (2022). Dynamic finite element modeling and simulation of single layer clothing ease allowance. Journal of Textile Research, 43(4), 124–132.
17. Xue, J. H., Chi, C., Wang, Z., Yang, S.C., Jiang, X. W. (2023). Research on digital identification of garment pieces based on contour fitting algorithm. 2023 18th International Conference on Intelligent Systems and Knowledge Engineering (ISKE) (pp. 659–664).10.1109/ISKE60036.2023.10481104 ↗
18. Yeung, K. W., Li, Y., Zhang, X. (2010). A 3D biomechanical human model for numerical simulation of garment-body dynamic mechanical interactions during wear. The Journal of The Textile Institute, 95, 59–79.10.1533/joti.2001.0050 ↗
19. Ye, C. Y., Liu, R., Ying, M. T. C., Liang, F. Y., Shi, Y. (2023). Characterizing the biomechanical transmission effects of elastic compression stockings on lower limb tissues by using 3D finite element modelling. Materials & Design, 232, 112182.10.1016/j.matdes.2023.112182 ↗
20. Chen, J. Z., Guo, Z. Y., Li, T., Du, L., Zou, F. Y. (2023). An undamaged pattern generation method from 3D scanned garment sample based on finite element approach. Industria Textila, 58(1), 35–41.10.35530/IT.074.01.202185 ↗
21. Ancutiene, K., Lage, A. (2017). Virtual try-on technologies in the clothing industry. Part 1: Investigation of distance ease between body and garment. Journal of the Textile Institute, 108(10), 1787–1793.10.1080/00405000.2017.1286701 ↗
22. Zhang, W. B. (2009). Pattern making for fashion design (pp. 68–69). China Textile & Apparel Press, Beijing.
23. Kang, X. L., Ying, B. A., Zhang, X., Duan, J. (2018). Finite element model for evaluating pressure distribution of men’s basic pattern on upper body. Journal of Textile Research, 39(11), 116–121.
24. Ai, M., Kim, K., Takatera, M. (2017). Effect of the difference between body dimensions and jacket measurements on the appearance of a ready-made tailored jacket. International Journal of Clothing Science and Technology, 29(5), 627–645.10.1108/IJCST-02-2017-0015 ↗