Durability Assessment of Composite Structural Element Reinforced with Fabric due to Delamination
Source abstract
Abstract
Abstract Layer composites reinforced with fabrics – laminates are construction materials in which mechanical properties can be shaped by designing their microstructure appropriately. However, the multi-phase microstructure of laminates makes it difficult to calculate the strength of the laminate constructions, especially when the reinforcement is a fabric. The article presents a special calculation model for determining the strength of an exemplary construction element made of laminate reinforced with a roving fabric with a plain weave made of carbon fibers. The computational model reflected in a simplified way the laminate microstructure, i.e. the number and orientation of the reinforcement fabric layers and its weave, and enabled a simulation of the behavior of the construction element under load up to fracture, which occurred as a result of breaking the reinforcement and interlayer crack – delamination. The simulation results were compared with the results of experimental stand tests. A method of modifying the computational model for laminates reinforced with non-plain weave was also suggested.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Mechanical Behavior of Composites · Mechanical and Thermal Properties Analysis · Composite Structure Analysis and Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
University of Bielsko-Biala , Department of Mechanical Engineering Fundamentals , Bielsko-Biala , Poland
References (18)
Show source-provided references
1. Carlsson, L. A., Adams, D. F., Pipes, R. B. (2014). Experimental characterization of advanced composite materials (4 ed.). CRC Press (Boca Raton).10.1201/b16618 ↗
2. Xiao, Z., Pei, L., Zhang, F., et al. (2019). Parameter measurement of biaxial braided composite preform based on phase congruency. Autex Research Journal, 19(1), 8–16.10.1515/aut-2018-0012 ↗
3. Yang, Y., Liu, X., Wang, Y-Q., et al. (2017). A progressive damage model for predicting damage evolution of laminated composites subjected to three-point bending. Composites Science and Technology, 151, 85–93.10.1016/j.compscitech.2017.08.009 ↗
4. Dong, K., Peng, X., Zhang, J., et al. (2017). Temperature-dependent thermal expansion behaviors of carbon fiber/epoxy plain woven composites: Experimental and numerical studies. Composite Structures, 176, 329–341.10.1016/j.compstruct.2017.05.036 ↗
5. Lindgaard, E., Bak, B. L. V. (2019). Experimental characterization of delamination in off-axis GFRP laminates during mode I loading. Composite Structures, 220, 953–960.10.1016/j.compstruct.2019.04.022 ↗
6. Nour, A., Gherbi, M. T., Tawfiq, I. (2017). Analysis of the Bauschinger effect on a multilayer helicopter blade by XFEM simulation. Aerospace Science and Technology, 69, 97–113.10.1016/j.ast.2017.05.039 ↗
7. Stadnicki, J., Tokarz, Z. (2016). Mesoscale finite element model for calculating deformations of laminate composite constructions. Advances in Mechanical Engineering, 8(2), 1–9.10.1177/1687814016633604 ↗
8. Vinšová, L., Urban, T. (2017). Testing of mechanical properties of thick-walled carbon fiber composite for FEM simulations. Materials Today: Proceedings, 4, 5989–5994.10.1016/j.matpr.2017.06.083 ↗
9. Krueger, R. (2004). Virtual crack closure technique: history, approach, and applications. Applied Mechanics Reviews, 57(2), 109–143.10.1115/1.1595677 ↗
10. Lindgaard, E., Bak, B. L. V., Glud, J. A., et al. (2017). A user programmed cohesive zone finite element for ANSYS Mechanical. Engineering Fracture Mechanics, 180, 229–239.10.1016/j.engfracmech.2017.05.026 ↗
11. Soni, G., Singh, R., Mitra, M., Falzon, B. G. (2014). Modelling matrix damage and fibre-matrix interfacial decohesion in composite laminates via a multi-fibre multi-layer representative volume element (M2RVE). International Journal of Solids and Structures, 51, 449–461.10.1016/j.ijsolstr.2013.10.018 ↗
12. Naghdinasab, M., Farrokhabadi, A., Madadi H. (2018). A numerical method to evaluate the material properties degradation in composite RVEs due to fiber-matrix debonding and induced matrix cracking. Finite Elements in Analysis and Design, 146, 84–95.10.1016/j.finel.2018.04.008 ↗
13. Bednarcyk, B.A., Stier, B., Simon, J-W., et al. (2015). Meso- and micro-scale modeling of damage in plain weave composites. Composite Structures, 121, 258–270.10.1016/j.compstruct.2014.11.013 ↗
14. Doitrand, A., Fagiano, C., Irisarri, F.-X., Hirsekorn, M. (2015). Comparison between voxel and consistent meso-scale models of woven composites. Composites: Part A, 73, 143–154.10.1016/j.compositesa.2015.02.022 ↗
15. Esposito, L., Pucillo, G. P., Penta, F., Rosiello, V. (2016). Micromechanical study and simulation of the interlaminar failure of a woven composite laminate. Procedia Structural Integrity, 2, 1870–1877.10.1016/j.prostr.2016.06.235 ↗
16. GMW16418: 2016. Door beam bending strength test.
17. Product data sheet: 2014. Biresin® CR120. Composite resin system.
18. Marszałek, J., Stadnicki, J. (2018). Simulation of delamination in a composite using a shell-beam mesoscale finite element model. Fibres & Textiles in Eastern Europe, 4(130), 97–103.10.5604/01.3001.0012.1319 ↗