Impact of Vertical and Horizontal Forces on the Seam in the Technological Process of Sewing Knit Fabrics
Source abstract
Abstract
Abstract The aim of this study was to determine the increase in vertical and horizontal forces of the presser foot on the seam during the technological process of sewing knit fabrics. The research was performed on three types of knit fabrics: double jersey (rib one plus one), interlock knit fabric, and bleached interlock knit fabric. In order to meet the criterion of seam quality, it is necessary to adjust the above-mentioned parameters optimally. Depending on the type of the knit fabric, the values of the investigated forces change, and by increasing the number of layers and the sewing speed, the force values increase.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Textile materials and evaluations
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
University of Zagreb , Faculty of Textile Technology, Department of Clothing Technology , Zagreb , Croatia
University of Bihać , Faculty of Technical Engineering , Bihać , Bosnia and Herzegovina
References (11)
Show source-provided references
1. [1] Bolić. B.: “Prilog analizi utjecajnih parametara na posmik pletiva u procesu šivanja, Zagreb, prosinac 2008.
2. [2] Ujević D., Rogale D.,. Kartal M, Brlobašić Šajatović B.: Impact of Sewing Needle and Thread on the Technological Process of Sewing Knitwear, Fibres & Textiles in Eastern Europe, 16, (2008), 4; 85-89, ISSN 1230-3666
3. [3] Ujević D., Brlobašić Šajatović B., Doležal K., Hrženjak R., Wadsworth, L. C.: Influence of Sewing Needle Penetration Force on the Quality of Knitted Garment, Proceedings of the Beltwide Cotton Conferences 2008, Cotton Utilization: Fabric Chemistry & Products Symposium, Nashville, Tennessee, USA, 08-11 January 2008, Boyd, S.; Huffman, M.; Richter, D.; Robertson, B. (Ed.), 2008, 1812-1821
4. [4] Ujević D., Brlobašić Šajatović B., Doležal K., Hrženjak R.: Investigation and Optimization of Specific Technological Sewing Parameters in Knitwear Manufacture, Proceedings of the 9th Autex Conference, 26-28. svibnja 2009., Kadođlu H.; Kumbasar E. P.; Celik P.; Arykan C. O.; Cay A.; Damcy G. (Ed.), Ege University, Department of Textile Engineering, Izmir, Turska, 908-912, ISBN 978-975-483-787-2
5. [5] Bühler, G., Dörfler, H., Hemrich, L.: Untersuchungen über das Transportverhalten von Maschenstoffen an der Nähmaschine, Denkendorf, 1996, page 588-683.
6. [6] Nestler, R. i Arnold, J.: Messtechnische Untersuchungen zum Nadeldurstechkraft-verhalten wahrend des Nahprozesses, Bekleidung und Maschenware, 18 (1979) 3, str. 132-136
7. [7] E.A.Marakušev: Eksperimentalno-analitička metoda djelovanja valjaka na materijal, Tehnika Kiev, 1976.
8. [8] Nikolić G., Šomođi Ž., Numerical Dynamic Analysis of Fabric Transport in the Sewing Proceedings of the 14th International DAAAM Symposium, ed. B. Katalinić, Wienna (2003)
9. [9] Šomođi Ž., Nikolić G.: Dynamic model for estimating friction effect on to the sewing regularity, Book of Proceedings, 2 nd International Textile, Clothing & Desing Conference, Dubrovnik, Croatia, 3 th-6 th October 2004, 617-623
10. [10] Robak D.: A model of Fabric Transport in a Sewing Machine Using a Feed Dog Covered with a Suplle Material of Increased Friction, Fibres & Textiles in Easten Europe, VII-IX., 2002 (59,62)
11. [11] Pallant J: SPSS: priručnik za preživaljavanje, Potpuni vodič kroz analizu podataka pomoću SPSS-a, prevod 4.izdanja, Mikro knjiga, Beograd, 2011.