Ozone Effect On the Properties of Aramid Fabric

Abstract The limitation of aramid fiber is its surface property, which results in its very poor interfacial adhesion to most of commercial resins. In order to improve the surface property of the aramid fiber, ozone treatment was carried out in this work. The aramid fabrics were evaluated in terms of surface morphology, wicking effect, tensile property, and ball bursting test. The results showed that the surface morphology of aramid fabrics did not undergo an obvious change; the wicking effect increased slightly with an increase in ozone treatment time; the tenacity and elongation of aramid fibers and fabrics did not significant change after ozone treatment, but the tenacity and elongation of aramid yarns showed significant improvement after ozone treatment, and increased with the increase of ozone treatment time; the ball bursting load and penetration displacement had a slight increase as well after ozone treatment. Therefore, ozone treatment could be one method to improve the surface property of the aramid fiber.