journal article·2026

ULTRAHIGH-SPEED VISUALIZATION OF DROPLET IMPACT REGIMES ON A SPHERICAL BAFFLE OF A JET NEBULIZER

Henrik Schmitz, Wilko Rohlfs, Manuel Armin Reddemann

Atomization and Sprays· Volume 36· Issue 3
Publisher page

Abstract

Jet nebulizers are widely used in aerosol therapy to deliver pharmaceuticals to the lungs. The effectiveness of the treatment depends on the droplet size distribution of the administered aerosol. Moreover, a successful administration of biological pharmaceuticals requires minimization of mechanical forces during atomization to ensure the pharmaceuticals' functionality. Consequently, a detailed understanding of the liquid breakup process is paramount. Therefore, this study focuses on resolving details of liquid breakup mechanisms at a curved baffle surface inside a jet nebulizer. To this end, a nozzle-baffle configuration with optical access was developed and ultrahigh-speed microscopy at five million frames per second (Mfps) was employed to visualize the internal atomization in a nebulizer. Additionally, droplet diameters of the produced aerosol and of the spray without baffle impact were measured. The microscopic analysis reveals that the atomization process on the baffle is spatially divided into three distinct regimes. In the central stagnation zone, breakup is dominated by high-inertia vertical splashing and crown formation. Radially outward, the flow transitions into the shear zone, where the high-velocity radial flow affects disintegration during oblique splashing and aerodynamic bag breakup. Finally, the flow enters the expansion zone, characterized by deceleration and reduced wall interactions. These findings demonstrate that the nebulizer utilizes a combination of impact inertia and aerodynamic shear to generate respirable aerosols. The resulting impact accelerations imply that the pharmaceuticals undergo extreme mechanical stress.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Particle Dynamics in Fluid Flows · Environmental and Sediment Control · Fluid Dynamics and Heat Transfer

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Improving Viability of Stem Cells during Syringe Needle Flow through the Design of Hydrogel Cell Carriers10.1089/ten.tea.2011.0391 ↗
2. Experimental Study of Different Shape Droplet Oblique Impact on a Thin Liquid Film10.5004/dwt.2022.28767 ↗
3. Maximal Deformation of an Impacting Drop10.1017/S0022112004000904 ↗
4. Medical Atomization Design for Inhalation Therapy
5. A Study of Droplet Deformation: The Effect of Crossflow Velocity on Jet Fuel and Biofuel Droplets Impinging onto a Dry Smooth Surface10.1016/j.fuel.2020.118321 ↗
6. Finlay W.H. · 2019 · 18310.1016/B978-0-08-102749-3.00008-7 ↗
7. Jet Nebulisation: Influence of Dynamic Conditions and Nebuliser on Nebulisation Quality. Application to the alpha 1 Protease Inhibitor10.1016/S0378-5173(96)04836-3 ↗
8. Free Underexpanded Jets in a Quiescent Medium: A Review10.1016/j.paerosci.2015.06.006 ↗
9. Correlation between Cell Survival and Atomization Characteristics in Air-Assisted Bronchoscopic Spraying10.1615/AtomizSpr.2021037434 ↗
10. Nebulization Criteria and Quantification10.3390/fluids5020091 ↗
11. Pulmonary Drug Delivery. Part I: Physiological Factors Affecting Therapeutic Effectiveness of Aerosolized Medications10.1046/j.1365-2125.2003.01892.x ↗
12. Comparison of Numerical Simulations to Experiments for Atomization in a Jet Nebulizer10.1371/journal.pone.0078659 ↗
13. Liquid Flow and Breakup in a Medical Gas-Liquid Coaxial Atomizer
14. Nebulizers for Drug Delivery to the Lungs10.1517/17425247.2015.995087 ↗
15. Influence of Coaxial Nozzle Design on Atomization of Cell Suspensions and Cell Survival Rate
16. Modeling Engine Spray/Wall Impingement
17. The Science of Nebulised Drug Delivery10.1136/thx.52.suppl_2.31 ↗
18. Effect of Impingement Angle on the Outcome of Single Water Drop Impact onto a Plane Water Surface10.1007/s00348-007-0406-z ↗
19. A Path Forward in the Development of New Aerosol Drug Delivery Devices for Pediatrics10.1016/j.rmed.2023.107210 ↗
20. Dissecting the Performance of a Jet Nebulizer: The Effect of Changing Design Parameters and Operating Conditions10.1080/02786826.2024.2338520 ↗
21. Characterization of Splashing and Regime Thresholds for Oblique Droplet Impact on Thin Wall Films10.1016/j.expthermflusci.2025.111493 ↗
22. Two-Fluid Atomization and Spray-Impact
23. Effervescent Atomizer as Novel Cell Spray Technology to Decrease the Gas-to-Liquid Ratio10.3390/pharmaceutics14112421 ↗
24. Drop Impact Dynamics: Splashing, Spreading, Receding, Bouncing10.1146/annurev.fluid.38.050304.092144 ↗