journal article·2024

HIGH FIDELITY SIMULATION ON THE BREAKUP AND DEFORMATION CHARACTERISTICS OF LIQUID JET IN CROSSFLOW WITH RECTANGULAR NOZZLES

Meng Shao, Zhixia He, Qian Wang

Atomization and Sprays· Volume 34· Issue 2
Publisher page

Abstract

High fidelity simulation was carried out by ANYS software to investigate the primary breakup characteristics of liquid jet in crossflow. The influence of nozzles shapes on the breakup features and deformation characteristics of liquid column was analyzed. Air velocity ranged from 40 m/s to 80 m/s and the shape of nozzles included circular, Rectangle-A, and Rectangle-B. The results indicated that, at the higher velocity of crossflow, the surface breakup of liquid column was mainly affected by the air velocity passing through the sides, rather the sharp corner of the rectangular nozzles. As compared with the circular nozzle, the boundary of breakup regime was expanded for Rectangle-A, while it was shrunk for Rectangle-B. In contrast to circular nozzles, the deflection of edges of liquid column was avoided for rectangular nozzles, thus preventing the shrinkage of liquid column during injection. The results of the analysis of the flow structures of crossflow showed that the air velocity in the flow direction of liquid column might be the reason for the difference of breakup regime of nozzles. In addition, the difference of windward trajectory between rectangular nozzles with the different widths was decreased as the air velocity increased.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Fluid Dynamics and Heat Transfer · Combustion and flame dynamics · Fluid Dynamics and Mixing

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Amini, G. and Dolatabadi, A., Axis-Switching and Breakup of Low-Speed Elliptic Liquid Jets, Int. J. Multiphase Flow, vol. 42, pp. 96-103, 2012.10.1016/j.ijmultiphaseflow.2012.02.001 ↗
2. Balasubramanyam, M.S. and Chen, C.P., Modeling Liquid Jet Breakup in High Speed Cross-Flow with Finite-Conductivity Evaporation, Int. J. Heat Mass Transf., vol. 51, pp. 3896-3905, 2008.10.1016/j.ijheatmasstransfer.2007.11.054 ↗
3. Behzad, M., Ashgriz, N., and Karney, B.W., Surface Breakup of a Non-Turbulent Liquid Jet Injected into a High Pressure Gaseous Crossflow, Int. J. Multiphase Flow, vol. 80, pp. 100-117, 2016.10.1016/j.ijmultiphaseflow.2015.11.007 ↗
4. Brackbill, J.U., Kothe, D.B., and Zemach, C., A Continuum Method for Modeling Surface Tension, J. Comput. Phys., vol. 100, pp. 335-354, 1992.10.1016/0021-9991(92)90240-Y ↗
5. Broumand, M. and Birouk, M., Liquid Jet in a Subsonic Gaseous Crossflow: Recent Progress and Remaining Challenges, Prog. Energy Combust. Sci., vol. 57, pp. 1-29, 2016.10.1016/j.pecs.2016.08.003 ↗
6. Broumand, M. and Birouk, M., Two-Zone Model for Predicting the Trajectory of Liquid Jet in Gaseous Crossflow, AIAA J., vol. 54, pp. 1499-1511, 2016.10.2514/1.J054440 ↗
7. Desjardins, O., Moureau, V., and Pitsch, H., An Accurate Conservative Level Set/Ghost Fluid Method for Simulating Turbulent Atomization, J. Comput. Phys., vol. 227, pp. 8395-8416, 2008.10.1016/j.jcp.2008.05.027 ↗
8. Eslamian, M., Amighi, A., and Ashgriz, N., Atomization of Liquid Jet in High-Pressure and High-Temperature Subsonic Crossflow, AIAA J., vol. 52, pp. 1374-1385, 2014.10.2514/1.J052548 ↗
9. Faeth, G.M., Hsiang, L.P., and Wu, P.K., Structure and Breakup Properties of Sprays, Int. J. Multiphase Flow, vol. 21, pp. 99-127, 1995.10.1016/0301-9322(95)00059-7 ↗
10. Fontes, D.H., Vilela, V., de Souza Meira, L., and de Souza, F.J., Improved Hybrid Model Applied to Liquid Jet in Crossflow, Int. J. Multiphase Flow, vol. 114, pp. 98-114, 2019.10.1016/j.ijmultiphaseflow.2019.02.009 ↗
11. Guo, M., Nishida, K., Ogata, Y., Wu, C., and Fan, Q., Experimental Study on Fuel Spray Characteristics under Atmospheric and Pressurized Cross-Flow Conditions, Second Report: Spray Distortion, Spray Area, and Spray Volume, Fuel, vol. 206, pp. 401-408, 2017.10.1016/j.fuel.2017.05.088 ↗
12. Hashiehbaf, A. and Romano, G.P., Particle Image Velocimetry Investigation on Mixing Enhancement of Non-Circular Sharp Edge Nozzles, Int. J. Heat Fluid Flow, vol. 44, pp. 208-221, 2013.10.1016/j.ijheatfluidflow.2013.05.017 ↗
13. Herrmann, M., Arienti, M., and Soteriou, M., The Impact of Density Ratio on the Liquid Core Dynamics of a Turbulent Liquid Jet Injected into a Crossflow, J. Eng. Gas Turbines Power, vol. 133, 2011.10.1115/1.4002273 ↗
14. Herrmann, M., Detailed Numerical Simulations of the Primary Atomization of a Turbulent Liquid Jet in Crossflow, J. Eng. Gas Turbines Power, vol. 132, 2010.10.1115/1.4000148 ↗
15. Hojnacki, J.T., Ramjet Engine Fuel Injection Studies, Tech. Rep., 1972.10.21236/AD0754852 ↗
16. Konkachbaev, A.I., Morley, N.B., and Gulec, K., Stability and Contraction of a Rectangular Liquid Metal Jet in a Vacuum Environment, Fusion Eng. Design, vols. 51-52, pp. 1109-1114, 2000.10.1016/S0920-3796(00)00215-5 ↗
17. Li, X. and Soteriou, M.C., Detailed Numerical Simulation of Liquid Jet Atomization in Crossflow of Increasing Density, Int. J. Multiphase Flow, vol. 104, pp. 214-232, 2018.10.1016/j.ijmultiphaseflow.2018.02.016 ↗
18. Li, X. and Soteriou, M.C., High Fidelity Simulation and Analysis of Liquid Jet Atomization in a Gaseous Crossflow at Intermediate Weber Numbers, Phys. Fluids, vol. 28, 2016.10.1063/1.4959290 ↗
19. Liu, N., Wang, Z., Sun, M., Deiterding, R., and Wang, H., Simulation of Liquid Jet Primary Breakup in a Supersonic Crossflow under Adaptive Mesh Refinement Framework, Aerospace Sci. Technol., vol. 91, pp. 456-473, 2019.10.1016/j.ast.2019.05.017 ↗
20. Menter, F.R., Kuntz, M., and Langtry, R., Ten Years of Industrial Experience with the SST Turbulence Model, Turb. Heat Mass Transf., vol. 4, pp. 625-632, 2003.
21. Menter, F.R., Two-Equation Eddy-Viscosity Turbulence Models for Engineering Applications, AIAA J., vol. 32, pp. 1598-1605, 1994.10.2514/3.12149 ↗
22. Morad, M.R. and Khosrobeygi, H., Penetration of Elliptical Liquid Jets in Low-Speed Crossflow, J. Fluids Eng., vol. 141, 2019.10.1115/1.4040373 ↗
23. Olyaei, G. and Kebriaee, A., Experimental Study of Liquid Jets Injected in Crossflow, Exp. Therm. Fluid Sci., vol. 115, 2020.10.1016/j.expthermflusci.2020.110049 ↗
24. Reitz, R., Modeling Atomization Processes in High-Pressure Vaporizing Sprays, Atomization Spray Technol., vol. 3, pp. 309-337, 1987.
25. Salewski, M., Stankovic, D., and Fuchs, L., Mixing in Circular and Non-Circular Jets in Crossflow, Flow Turb. Combust., vol. 80, pp. 255-283, 2008.10.1007/s10494-007-9119-x ↗
26. Sallam, K.A., Aalburg, C., and Faeth, G.M., Breakup of Round Nonturbulent Liquid Jets in Gaseous Crossflow, AIAA J., vol. 42, pp. 2529-2540, 2004.10.2514/1.3749 ↗
27. Sharma, P. and Fang, T., Breakup of Liquid Jets from Non-Circular Orifices, Exp. Fluids, vol. 55, 2014.10.1007/s00348-014-1666-z ↗
28. Sharma, P. and Fang, T., Spray and Atomization of a Common Rail Fuel Injector with Non-Circular Orifices, Fuel, vol. 153, pp. 416-430, 2015.10.1016/j.fuel.2015.02.119 ↗
29. Song, J., Cary, C.C., and Guen, L.J., Liquid Jets in Subsonic Air Crossflow at Elevated Pressure, J. Eng. Gas Turbines Power, vol. 137, 2015.10.1115/1.4028565 ↗
30. Takao, I. and Nobuki, N., Spray Characteristics of Liquid Jet Traversing Subsonic Airstreams, J. Propuls. Power, vol. 13, 1997. DOI: 10.2514/2.515610.2514/2.5156 ↗
31. Wang, F. and Fang, T., Liquid Jet Breakup for Non-Circular Orifices under Low Pressures, Int. J. Multiphase Flow, vol. 72, pp. 248-262, 2015.10.1016/j.ijmultiphaseflow.2015.02.015 ↗
32. Wang, S., Huang, Y., and Liu, Z.L., Theoretical Analysis of Surface Waves on a Round Liquid Jet in a Gaseous Crossflow, Atomization Sprays, vol. 24, pp. 23-40, 2014.10.1615/AtomizSpr.2013008203 ↗
33. Wiest, H.K. and Heister, S.D., Experimental Study of a Heated Liquid Jet in a Crossflow, In 51st AIAA/SAE/ASEE Joint Propulsion Conf., Orlando, FL, 2015.10.2514/6.2015-3864 ↗
34. Wilcox, D.C., Reassessment of the Scale-Determining Equation for Advanced Turbulence Models, AIAA J., vol. 26, pp. 1299-1310, 1988.10.2514/3.10041 ↗
35. Xiao, F., Dianat, M., and McGuirk, J.J., Large Eddy Simulation of Liquid-Jet Primary Breakup in Air Crossflow, AIAA J., vol. 51, pp. 2878-2893, 2013.10.2514/1.J052509 ↗
36. Yu, S., Yin, B., Deng, W., Jia, H., Ye, Z., Xu, B., and Xu, H., Experimental Study on the Diesel and Biodiesel Spray Characteristics Emerging from Equilateral Triangular Orifice under Real Diesel Engine Operation Conditions, Fuel, vol. 224, pp. 357-365, 2018.10.1016/j.fuel.2018.03.099 ↗
37. Yu, S., Yin, B., Deng, W., Jia, H., Ye, Z., Xu, B., and Xu, H., Experimental Study on the Spray and Mixing Characteristics for Equilateral Triangular and Circular Nozzles with Diesel and Biodiesel under High Injection Pressures, Fuel, vol. 239, pp. 97-107, 2019.10.1016/j.fuel.2018.10.146 ↗