SWIRLING FLOW AND BREAKUP CHARACTERISTICS AT HIGH REYNOLDS NUMBER IN A PRESSURE-SWIRL ATOMIZER FOR ARTIFICIAL SNOWMAKING
Source abstract
Abstract
The pressure-swirl atomizer is used to provide atomized droplets, which is the main atomization component of the snowmaker. The formation of snowflakes is significantly affected by the effective collision between droplets and ice nucleus produced by ice nucleus generator. Whether the collision position moves forward or lags behind, it will both cause deterioration of the snow quality. Therefore, the flow and breakup process, breakup length, and variation law of atomization are very crucial for regulating the snow quality. The fully developed swirling flow at high Reynolds number in the pressure-swirl atomizer for outdoor snowmakers were investigated based on VOF-LES approach, and its accuracy was verified by experimental results. It was found that the Kelvin-Helmholtz instability caused by the velocity difference at gas-liquid interface decisively leads to the liquid film fragmentation. The primary breakup occurs after 5.4 ~ 5.8 times orifice diameter. As the injection pressure increases from 0.6 MPa to 1.4 MPa, the breakup length reduces by 7.7%, the jet velocity increases by 66.7%. It is critical to adjust the effective collision position and enhance the convection, so as to improve the quality of snow.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Fluid Dynamics and Heat Transfer · Particle Dynamics in Fluid Flows · Icing and De-icing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Agarwal, A. and Trujillo, M.F., The Effect of Nozzle Internal Flow on Spray Atomization, Int. J. Engine Res., vol. 21, no. 1, pp. 55-72, 2020.10.1177/1468087419875843 ↗
2. Amini, G., Liquid Flow in a Simplex Swirl Nozzle, Int. J. Multiphase Flow, vol. 79, pp. 225-235, 2016.10.1016/j.ijmultiphaseflow.2015.09.004 ↗
3. Bayvel, L. and Orzechowski, Z., Liquid Atomization, Milton Park, UK: Routledge, 2019.10.1201/9780203748787 ↗
4. Celik, I.B., Cehreli, Z.N., and Yavuz, I., Index of Resolution Quality for Large Eddy Simulations, J. Fluids Eng., vol. 127, no. 9, pp. 949-958, 2005.10.1115/1.1990201 ↗
5. Chandrasekhar, S., Hydrodynamic and Hydromagnetic Stability, London: Oxford University Press, 1961.
6. Dafsari, R.A., Lee, H.J., Han, J., and Lee, J., Evaluation of the Atomization Characteristics of Aviation Fuels with Different Viscosities Using a Pressure Swirl Atomizer, Int. J. Heat Mass Transf., vol. 145, p. 118704, 2019.10.1016/j.ijheatmasstransfer.2019.118704 ↗
7. Ding, J.W., Li, G.X., Yu, Y.S., and Li, H.M., Numerical Investigation on Primary Atomization Mechanism of Hollow Cone Swirling Sprays, Int. J. Rotating Mach., vol. 2016, p. 1201497, 2016.10.1155/2016/1201497 ↗
8. Eggers, J. and Villermaux, E., Physics of Liquid Jets, J. Rep. Prog. Phys., vol. 71, p. 036601, 2008.10.1088/0034-4885/71/3/036601 ↗
9. Fuster, D., Bague, A., Boeck, T., Moyne, L.L., Leboissetier, A., Popinet, S., Ray, P., Scardovelli, R., and Zaleski, S., Simulation of Primary Atomization with an Octree Adaptive Mesh Refinement and VOF Method, Int. J. Multiphase Flow, vol. 35, no. 6, pp. 550-565, 2009.10.1016/j.ijmultiphaseflow.2009.02.014 ↗
10. Galbiati, C., Ertl, M., Tonini, S., Cossali, G.E., and Weigand, B., DNS Investigation of the Primary Breakup in a Conical Swirled Jet, High Perf. Comput. Sci. Engine. 15, Stuttgart, Germany, pp. 333-347, 2016.10.1007/978-3-319-24633-8_22 ↗
11. Galbiati, C., Tonini, S., Conti, P., and Cossali, G.E., Numerical Simulations of Internal Flow in an Aircraft Engine Pressure Swirl Atomizer, J. Propuls. Power, vol. 32, no. 6, pp. 1433-1441, 2016.10.2514/1.B35944 ↗
12. Gallaire, F. and Chomaz, J.M., Instability Mechanisms in Swirling Flows, Phys. Fluids, vol. 15, pp. 2622-2639, 2003.10.1063/1.1589011 ↗
13. Gilaberte-Burdalo, M., Lopez-Martin, F., Pino-Otin, M.R., and Lopez-Moreno, J.I., Impacts of Climate Change on Ski Industry, J. Environ. Sci. Policy, vol. 44, pp. 51-61, 2014.10.1016/j.envsci.2014.07.003 ↗
14. Grosshans, H., Large Eddy Simulation of Atomizing Sprays, Division of Fluid Mechanics, Department of Energy Sciences, Lund University, 2013.
15. Grunewald, T. and Wolfsperger, F., Water Losses during Technical Snow Production: Results from Field Experiments, J. Front. Earth Sci., vol. 7, p. 78, 2019.10.3389/feart.2019.00078 ↗
16. Halder, M.R., Dash, S.K., and Som, S.K., Initiation of Air Core in a Simplex Nozzle and the Effects of Operating and Geometrical Parameters on Its Shape and Size, J. Exp. Therm. Fluid Sci., vol. 26, no. 8, pp. 871-878, 2002.10.1016/S0894-1777(02)00153-X ↗
17. Haller, G., An Objective Definition of a Vortex, J. Fluid Mech., vol. 525, pp. 1-26, 2005.10.1017/S0022112004002526 ↗
18. Kang, Z., Wang, Z., Li, Q., and Cheng, P., Review on Pressure Swirl Injector in Liquid Rocket Engine, Acta Astronaut., vol. 145, pp. 174-198, 2018.10.1016/j.actaastro.2017.12.038 ↗
19. Laurila, E., Koivisto, S., Kankkunen, A., Saari, K., Maakala, V., Jarvinen, M., and Vuorinen, V., Computational and Experimental Investigation of a Swirl Nozzle for Viscous Fluids, Int. J. Multiphase Flow, vol. 128, p. 103278, 2020.10.1016/j.ijmultiphaseflow.2020.103278 ↗
20. Lee, E.J., Oh, S.Y., Kim, H.Y., James, S.C., and Yoon, S.S., Measuring Air Core Characteristics of a Pressure-Swirl Atomizer via a Transparent Acrylic Nozzle at Various Reynolds Numbers, Exp. Therm. Fluid Sci., vol. 34, no. 8, pp. 1475-1483, 2010.10.1016/j.expthermflusci.2010.07.010 ↗
21. Lefebvre, A.H. and McDonell, V.G., Atomization and Sprays, Boca Raton, FL: CRC Press, 2017.10.1201/9781315120911 ↗
22. Maly, M., Jedelsky, J., Slama, J., Sapik, M., and Wigley, G., Internal Flow and Air Core Dynamics in Simplex and Spill-Return Pressure-Swirl Atomizers, Int. J. Heat Mass Transf., vol. 123, pp. 805-814, 2018.10.1016/j.ijheatmasstransfer.2018.02.090 ↗
23. Mandal, A., Jog, M.A., Xue, J., and Ibrahim, A.A., Flow of Power-Law Fluids in Simplex Atomizers, Int. J. Heat Fluid Flow, vol. 29, no. 5, pp. 1494-1503, 2008.10.1016/j.ijheatfluidflow.2008.05.006 ↗
24. Mithun, M.G., Koukouvinis, P., and Gavaises, M., Numerical Simulation of Cavitation and Atomization Using a Fully Compressible Three-Phase Model, J. Phys. Rev. Fluids, vol. 3, no. 6, p. 064304, 2018.10.1103/PhysRevFluids.3.064304 ↗
25. Moon, S., Abo-Serie, E., and Bae, C., The Spray Characteristics of a Pressure-Swirl Injector with Various Exit Plane Tilts, Int. J. Multiphase Flow, vol. 34, no. 7, pp. 615-627, 2008.10.1016/j.ijmultiphaseflow.2008.01.003 ↗
26. Ponstein, J., Instability of Rotating Cylindrical Jets, J. Appl. Sci. Res., vol. A8, pp. 425-456, 1959.10.1007/BF00411768 ↗
27. Renze, P., Heinen, K., and Schoenherr, M., Experimental and Numerical Investigation of Pressure Swirl Atomizers, J. Chem. Eng. Technol., vol. 34, no. 7, pp. 1191-1198, 2011.10.1002/ceat.201100054 ↗
28. Shao, C., Luo, K., Chai, M., and Fan, J., Sheet, Ligament and Droplet Formation in Swirling Primary Atomization, J. AIP Adv., vol. 8, no. 4, p. 045211, 2018.10.1063/1.5017162 ↗
29. Som, S.K., Air Core in Pressure Swirl Atomizing Nozzles, Atomization Sprays, vol. 22, no. 4, 2012.10.1615/AtomizSpr.2012005174 ↗
30. Steiger, R., Scott, D., Abegg, B., Pons, M., and Aall, C., A Critical Review of Climate Change Risk for Ski Tourism, J. Curr. Issues Tour., vol. 22, no. 11, pp. 1343-1379, 2019.10.1080/13683500.2017.1410110 ↗
31. Vijay, G.A., Moorthi, N.S.V., and Manivannan, A., Internal and External Flow Characteristics of Swirl Atomizers: A Review, Atomization Sprays, vol. 25, no. 2, 2015.10.1615/AtomizSpr.2014010219 ↗
32. Yeh, C.L., Numerical Simulation of a Turbulent Liquid Jet Emanating from a Plain-Orifice Atomizer and a Pressure-Swirl Atomizer, J. Numer. Heat Transf. Part A: Appl., vol. 51, no. 12, pp. 1187-1212, 2007.10.1080/10407780601009082 ↗
33. Yeh, C.L., Turbulent Flow Simulation of Liquid Jet Emanating from Pressure-Swirl Atomizer, J. Heat Mass Transf., vol. 44, no. 3, pp. 275-280, 2008.10.1007/s00231-007-0237-8 ↗
34. Yu, H., Jin, Y.C., Cheng, W., Yang, X.H., Peng, X.L., and Xie, Y., Multiscale Simulation of Atomization Process and Droplet Particles Diffusion of Pressure-Swirl Nozzle, J. Powder Technol., vol. 379, pp. 127-143, 2021.10.1016/j.powtec.2020.10.053 ↗
35. Zhang, B., Wang, R., Wu, H., Dong, P.W., Xu, R.J., Xing, M.B., Zhang, H.J., Cui, Z., Yan, G., and Zhang, H., Atomization Characteristics of Twin Nozzles for Outdoor Snow-Makers Application, Int. J. Refrig., vol. 139, pp. 60-69, 2022.10.1016/j.ijrefrig.2022.03.025 ↗
36. Zhang, Y., Kang, C., Gao, K., and Zhao, H.X., Flow and Atomization Characteristics of a Twin-Fluid Nozzle with Internal Swirling and Self-Priming Effects, Int. J. Heat Fluid Flow, vol. 85, p. 108632, 2020.10.1016/j.ijheatfluidflow.2020.108632 ↗