DESIGN, EXPERIMENTAL AND NUMERICAL INVESTIGATION OF COAXIAL SWIRL INJECTOR
Source abstract
Abstract
The paper presents the experimental and numerical investigation of a coaxial swirl injector, part of a multi-element injector head designed to equip a 30daN thrust rocket engine. The rocket engine is designed to function using LOX as oxidant and LCH4 as fuel. Two injector configurations have been proposed, one having 4 tangential channels for the oxidizer, and one having 6 tangential channels. The injectors testing assembly was first made by additive manufacturing using a 3D resin printer. In the next stage, in order to perform tests at pressures higher than 3 bar, the testing assembly was made of stainless steel, and the injectors were made of Inconel by additive manufacturing using the selective laser melting technology. The impact of the surfaces' roughness upon the spray cone angle and the atomization efficiency has been observed. The mass flow curves and cold flow discharge coefficients Cd for the proposed injectors have been assessed using water instead of LOX. Numerical simulations have been carried out using ANSYS CFX.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Rocket and propulsion systems research · Combustion and flame dynamics · Fluid Dynamics and Heat Transfer
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Adams, T., Grant, C., and Watson, H., A Simple Algorithm to Relate Measured Surface Roughness to Equivalent Sand-Grain Roughness, Int. J. Mech. Eng. Mechatron., vol. 1, pp. 66-71,2012.10.11159/ijmem.2012.008 ↗
2. Ahn, K. and Choi, H., A Study on Discharge Coefficients of Closed-Type Swirl Injectors for a Liquid Rocket Engine, Atomiz. Sprays, vol. 27, pp. 569-578, 2017.10.1615/AtomizSpr.2017019096 ↗
3. Ahn, K. and Lee, B.J., Experimental Study on the Discharge Coefficient of Bi-Swirl Coaxial Injectors, J. Appl. Fluid Mech, vol. 12, pp. 1439-1447,2019.10.29252/jafm.12.05.29533 ↗
4. Akinyemi, O.S. and Jiang, L., Development and Combustion Characterization of a Novel Twin-Fluid Fuel Injector in a Swirl-Stabilized Gas Turbine Burner Operating on Straight Vegetable Oil, Exp. Therm. FluidSci., vol. 102, pp. 279-290, 2019.10.1016/j.expthermflusci.2018.11.014 ↗
5. ANSYS, CFX-Solver Theory Guide, Release 12, ANSYS Inc., 2009.
6. Arun, S. and Rakesh, P., Computational Evaluation of Spray Characteristics in Pressure Swirl Atomizers, Int. J. Sci. Eng. Res., vol. 5, no. 7, pp. 804-809, 2014.
7. Capata, R. and Achille, M., Design and Optimization of Fuel Injection of a 50 kW Micro Turbogas, Designs, vol. 2, pp. 14-25, 2018.10.3390/designs2020014 ↗
8. Chen, C., He, X., Liu, C., Yang, Y., and Tang, Z., Experimental Study on the Flow Field Distribution Characteristics of a Gas-Liquid Swirl Coaxial Injector under Ambient Pressure, Aerospace Sci. Technol., vol. 114, p. 106757,2021.10.1016/j.ast.2021.106757 ↗
9. Chu, W., Li, X., Tong, Y., and Ren, Y., Numerical Investigation of the Effects of Gas-Liquid Ratio on the Spray Characteristics of Liquid Centered Swirl Coaxial Injectors, Acta Astronaut., vol. 175, pp. 204-215,2020.10.1016/j.actaastro.2020.05.050 ↗
10. Cui, J., Lai, H., Li, J., and Ma, Y., Visualization of Internal Flow and the Effect of Orifice Geometry on the Characteristics of Spray and Flow Field in Pressure-Swirl Atomizers, Appl. Therm. Eng., vol. 127, pp. 812-822, 2017.10.1016/j.applthermaleng.2017.08.103 ↗
11. Danh, V., Akinyemi, O.S., Taylor, C.E., Frank, J.T., and Jiang, L., Effect of Injector Swirl Number on a Near-Field Spray Characteristics and a Novel Twin-Fluid Injector, Exp. Fluids, vol. 60, p. 80,2019.10.1007/s00348-019-2721-6 ↗
12. Dar, U.A. and Bannikov, M., Swirl Atomizer Design for Evaporative Cooling of High Temperature Compressed Air Stream, Int. J. FluidMech. Res., vol. 41, pp. 51-70, 2014.10.1615/InterJFluidMechRes.v41.i1.40 ↗
13. Dincer, I. and Zamfirescu, C., Drying Phenomena: Theory and Applications, First Edition, Hoboken, NJ: Wiley, 2016.10.1002/9781118534892 ↗
14. Fang, X. and Shen, C., Study on Atomization and Combustion Characteristics of LOZ/Methane Pintle Injectors, Acta Astronaut., vol. 136, pp. 369-379, 2017.10.1016/j.actaastro.2017.03.025 ↗
15. Galbiati, C., Tonini, S., Conti, P., and Cossali, G.E., Numerical Simulations of Internal Flow in an Aircraft Engine Pressure Swirl Atomizer, J. Propuls. Power, vol. 32, no. 6, pp. 1433-1441,2016.10.2514/1.B35944 ↗
16. Hautman, D.J., Spray Characterization of Liquid/Gas Coaxial Injectors with the Center Liquid Swirled, Atomiz. Sprays, vol. 3, 1993.10.1615/AtomizSpr.v3.i4.20 ↗
17. Im, J.-H., Cho, S., Yoon, Y., and Moon, I., Comparative Study of Spray Characteristics of Gas-Centered and Liquid-Centered Swirl Coaxial Injectors, J. Propuls. Power, vol. 26, pp. 1196-1204, 2010.10.2514/1.48436 ↗
18. Kannaiyan, K. and Vaidyanathan, A., Design and Characterization of Liquid Centered Swirl-Coaxial Injector, in Fluid Mechanics and Fluid Power-Contemporary Research: Proc. of the 5th Int. and 41st National Conf. on FMFP 2014, Kanpur, India, pp. 23-32,2017.10.1007/978-81-322-2743-4_3 ↗
19. Lefebvre, A.H. and McDonell, V.G., Atomization Sprays, Second Edition, Boca Raton, FL: CRC Press, 2017.10.1201/9781315120911 ↗
20. Natarajan, V., Unnikrishnan, U., Hwang, W.-S., Choi, J.-Y., and Yang, V., Numerical Study of Two-Phase Flow Dynamics and Atomization in an Open-Type Liquid Swirl Injector, Int. J. Multiphase Flow, vol. 143, p. 103702,2021.10.1016/j.ijmultiphaseflow.2021.103702 ↗
21. Pope, S.B., Turbulent Flows, Cambridge, UK: Cambridge University Press, 2000.10.1017/CBO9780511840531 ↗
22. Rizk, N.K., Chin, J.S., and Razdan, M.K., Modeling of Gas Turbine Fuel Nozzle Spray, Trans. ASME, vol. 119, pp. 34-44, 1997.10.1115/1.2815559 ↗
23. Sadek, A., Ritter, G., Drews, C., and Ryan, D., Additive Manufacturing of Fuel Injectors, Final Technical Report, Project No. 55232GTH, 2017.
24. Saha, K., Som, S., Battistoni, M., Li, Y., Quan, S., and Senecal, P.K., Modeling ofInternal and Near-Nozzle Flow for a Gasoline Direct Injection Fuel Injector, J. Energy Resour. Technol., vol. 138, p. 052208,2016.10.1115/1.4032979 ↗
25. Soller, S., Behr, R., Beyer, S., Laihier, F., Lehmann, M., Preuss, A., and Salapete, R., Design and Testing of Liquid Propellant Injectors for Additive Manufacturing, 7th European Conf. for Aerospace Sciences, Milan, Italy, 2017.
26. Sumer, B., Erkan, N., Uzol, O., and Tuncer, I.H., Experimental and Numerical Investigation of a Pressure Swirl Atomizer, 12th Triennial Int. Conf. on Liquid Atomization and Spray Systems, Heidelberg, Germany, 2012.
27. Sun, Y., Alkhedhair, A.M., Guan, Z., and Hooman, K., Numerical and Experimental Study on the Spray Characteristics of Full-Cone Pressure Swirl Atomizers, Energy, vol. 160, pp. 678-692,2018.10.1016/j.energy.2018.07.060 ↗
28. Tan, E.S. and Zulhairi, M.A., Feasibility of Biodiesel as Microturbine Alternative Fuel through Atomization Characteristics Study, Proc. ASME Turbo Expo 2012, Copenhagen, Denmark, 2012.10.1115/GT2012-68039 ↗
29. Wang, X., Wang, Y., and Yang, V., Geometric Effects on Liquid Oxygen/Kerosene Bi-Swirl Injector Flow Dynamics at Supercritical Conditions, AIAA J., vol. 55, pp. 3467-3475, 2017.10.2514/1.J055952 ↗
30. Yoon, W. and Ahn, K., Flow Characteristics of Close-Type Swirl Injectors Manufactured by a 3D Printer, Atomiz. Sprays, vol. 27, 2016.10.1615/AtomizSpr.2016015596 ↗
31. Yoon, W. and Ahn, K., Experimental and Theoretical Study on Spray Angles of Bi-Swirl Coaxial Injectors, J. Appl. FluidMech, vol. 11, pp. 1377-1386, 2018.10.29252/jafm.11.05.28814 ↗
32. Zang, T., Dong, B., Zhou, X., Guan, L., Li, W., and Zhou, S., Experimental Study of Spray Characteristics of Kerosene-Ethanol Blends from a Pressure-Swirl Nozzle, Int. J. Aerospace Eng., vol. 2, pp. 1-14, 2018.10.1155/2018/2894908 ↗
33. Zhao, L., Wang, M., Wang, P., Zhu, X., Qiu, Q., and Shen, S., Experimental Study on the Internal Flow Field and Spray Characteristics of Hollow Nozzle, Appl. Therm. Eng., vol. 144, pp. 757-768,2018.10.1016/j.applthermaleng.2018.06.047 ↗