DEVELOPMENT OF A MICRO-CHANNEL BASED ROTARY ATOMIZER AND ITS SPRAY CHARACTERIZATION
Source abstract
Abstract
A novel micro-channel based rotary (MCR) atomizer has been developed, which produces spiralling micro-jets leading to the formation of a well-dispersed fine spray. A co-swirl air stream envelops the liquid jets to aid in the process of atomization. Initially, the jet break-up process is studied using high speed shadowgraphy. The liquid jets deform into elliptical and eventually sheet-type cross-sections at higher rotational speeds, due to air drag. Also, a hydrodynamic instability develops in the form of wavelets consisting of bag-like surfaces pinned between thick crests. At higher rotational speeds or air flow rates, the wavelets break-down to form small droplets. Subsequently, secondary spray atomization characteristics of droplets due to interaction with air stream have been investigated using Phase Doppler Particle Analyzer. At axial distances of about 5 nozzle diameters, a hollow cone spray is observed, consisting of relatively larger droplets formed during jet break-up. The region close to the spray axis consists of smaller droplets entrained by the recirculatory air flow. At higher swirl, the recirculation zone widens radially and as a result, peak droplet velocities and droplet sizes shift away from the axis. At an axial distance of about 10 nozzle diameters, the droplet sizes and droplet number densities become more uniform spatially, due to competing droplet coalescence and break-up phenomena. The present novel MCR atomizer provides a nearly uniform fine spray, for a range of flow conditions.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Fluid Dynamics and Heat Transfer · Plant Surface Properties and Treatments · Combustion and flame dynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Aalburg, C., van Leer, B., Faeth, G.M., and Khaled, A.S., Properties of Non-Turbulent Round Liquid Jets in Uniform Gaseous Cross Flows, Atomization Sprays, vol. 15, pp. 271-294, 2005.10.1615/AtomizSpr.v15.i3.20 ↗
2. Ahmed, M. and Youssef, M.S., Characteristics of Mean Droplet Size Produced by Spinning Disk Atomizers, J. Fluids Eng., vol. 134, p. 071103, 2012.
3. Ahmed, M. and Youssef, M.S., Influence of Spinning Cup and Disk Atomizer Configurations on Droplet Size and Velocity Characteristics, Chem. Eng. Sci., vol. 107, pp. 149-157, 2014.10.1016/j.ces.2013.12.004 ↗
4. Chen, B., Gao, D., Liang, Y., Zhao, J., and Sun, Y., Experimental Investigation of Atomization and Droplet Turbulence Characteristics of a Twin-Fluid Nozzle with Different Self-Excited Vibrating Cavity Structures, Exp. Therm. Fluid Sci., vol. 99, pp. 525-536, 2018.10.1016/j.expthermflusci.2018.08.017 ↗
5. Choi, S.M., Jang, S.H., Lee, D.H., and You, G.W., Spray Characteristics of the Rotating Fuel Injection System of a Micro-Jet Engine, J. Mech. Sci. Technol., vol. 24, pp. 551-558, 2010.10.1007/s12206-009-1206-6 ↗
6. Choi, S.M., Yun, S., Jeong, H.J., and Corber, A., Spray in Cross Flow Rotary Atomizer, Atomization Sprays, vol. 22, pp. 143-161, 2012a.10.1615/AtomizSpr.2012005049 ↗
7. Choi, S.M., Yun, S., Jeong, H.J., and Corber, A., Spatial Drop Behaviour of a Rotary Atomizer in a Cross Flow, Atomization Sprays, vol. 22, pp. 1077-1095, 2012b.10.1615/AtomizSpr.2013007146 ↗
8. Dahm,W.J.A., Patel, P.R., and Lerg, B.H., Experimental Visualizations of Liquid Breakup Regimes in Fuel Slinger Atomization, Atomization Sprays, vol. 16, pp. 933-944, 2006a.10.1615/AtomizSpr.v16.i8.50 ↗
9. Dahm, W.J.A., Patel, P.R., and Lerg, B.H., Analysis of Liquid Breakup Regimes in Fuel Slinger Atomization, Atomization Sprays, vol. 16, pp. 945-962, 2006b.10.1615/AtomizSpr.v16.i8.60 ↗
10. Dunand, A., Carreau, J.L., and Roger, F., Liquid Jet Breakup and Atomization by Annular Swirling Gas Jet, Atomization Sprays, vol. 15, pp. 271-294, 2014.10.1615/AtomizSpr.v15.i2.70 ↗
11. Fisher, B.T., Weismiller, M.R., Tuttle, S.G., and Hinnant, K.M., Effects of Fluid Properties on Spray Characteristics of a Flow-Blurring Atomizer, J. Eng. Gas Turbines Power, vol. 15, pp. 271-294, 2017.10.1115/GT2017-63135 ↗
12. Gad, H.M., Ibrahim, I.A., Abdel-Baky, M.E., Abd El-Samed, A.K., and Farag, T.M., Experimental Study of Diesel Fuel Atomization Performance of Air Blast Atomizer, Exp. Therm. Fluid Sci., vol. 99, pp. 211-218, 2018.10.1016/j.expthermflusci.2018.07.006 ↗
13. Ghate, K., Sharma, S., and Sundararajan, T., Spray Atomization Characteristics of a Low-Pressure Rotary Injector, Atomization Sprays, vol. 29, pp. 493-519, 2019.10.1615/AtomizSpr.2019030691 ↗
14. Jang, S.H. and Choi, S.M., Spray Behaviour of the Rotary Atomizer with In-Line Injection Orifices, Atomization Sprays, vol. 20, pp. 863-875, 2010.10.1615/AtomizSpr.v20.i10.30 ↗
15. Lefebvre, A.H., Atomization and Sprays, New York: Hemisphere Publishing Corp., 1989.10.1201/9781482227857 ↗
16. Lefebvre, A.H. and McDonell, V.G., Atomization and Sprays, 2nd ed., Boca Raton, FL: CRC Press, 2017.10.1201/9781315120911 ↗
17. Muthuselvan, G., Ghate, K., Rao, M.S., Iyengar, V.S., Sundararajan, T., and Srinivasan, K., Experimental Study of Spray Breakup Phenomena in Small-Scale Simplex Atomizers with and without Air Swirl, Atomization Sprays, vol. 28, pp. 299-320, 2018.10.1615/AtomizSpr.2018021190 ↗
18. Ng, C.L., Sankarakrishnan, R., and Sallam, K.A., Bag Breakup of Non-Turbulent Liquid Jets in Cross Flow, Int. J. Multiphase Flow, vol. 34, pp. 241-259, 2008.10.1016/j.ijmultiphaseflow.2007.07.005 ↗
19. Paquet, B., Champlain, A., and Kalla, S., Review of Fuel Spray Distributions to Predict Performance of Rotary Atomizers in a Slinger Gas Turbine Combustor, Atomization Sprays, vol. 26, pp. 483-511, 2016.10.1615/AtomizSpr.2015012258 ↗
20. Rezayat, S., Farshchi, M., Karimi, H., and Kebriaee, A., Spray Characterization of a Slinger Injector Using a High-Speed Imaging Technique, J. Propuls. Power, vol. 34, pp. 469-481, 2018.10.2514/1.B36498 ↗
21. Rezayat, S., Farshchi, M., and Ghorbanhoseini, M.A., Primary Breakup Dynamics and Spray Characteristics of a Rotary Atomizer with Radial-Axial Discharge Channels, Int. J. Multiphase Flow, vol. 34, pp. 315-338, 2019.10.1016/j.ijmultiphaseflow.2018.10.001 ↗
22. Sahu, S., Chakraborty, A., and Maurya, D., Coriolis-Induced Liquid Breakup and Spray Evolution in a Rotary Slinger Atomizer: Experiments and Analysis, Int. J. Multiphase Flow, vol. 135, p. 103532, 2021.
23. Sescu, C., Experimental and Computational Study on Liquid Atomization by Slinger Injector, Spray Characterization of a Slinger Injector Using a High-Speed Imaging Technique, PhD, University of Toledo, College of Engineering, 2011.
24. Sharma, S., Ghate, K., Sundararajan, T., and Sahu, S., Effects of Air Swirler Geometry on Air and Spray Droplet Interactions in a Spray Chamber, Adv. Mech. Eng., vol. 11, pp. 1-15, 2019.10.1177/1687814019850978 ↗
25. Sharma, S., Ghate, K., Sahu, S., and Sundararajan, T., Enhancement in Spray Atomization and Droplet Dispersal by Insertion of Perforated Plate in Swirl Air Stream, Multiphase Sci. Technol., vol. 32, pp. 203-220, 2020.10.1615/MultScienTechn.2020034209 ↗
26. Soltani, M.R., Ghorbanian, K., Ashjaee, M., and Morad, M.R., Spray Characteristics of a Liquid-Liquid Coaxial Swirl Atomizer at Different Mass Flow Rates, Aerosp. Sci. Technol., vol. 9, pp. 592-604, 2005.10.1016/j.ast.2005.04.004 ↗
27. Zhao, F., Li, X., Ren, Z., Shi, Y., and Yang, Y., Study on Atomization Characteristic of Dual-Orifice Pressure-Swirl Injector, J. Phys. Conf. Ser., vol. 916, p. 012012, 2017.