AN APPROACH FOR SMALL DROPLET PRODUCTION: NEBULIZATION BY EXPANSION OF WATER/LIQUID CARBON DIOXIDE EMULSIONS
Source abstract
Abstract
Droplets in the small micrometer size range can be used in various applications such as spray drying for producing submicron-sized particles. Unfortunately, conventional atomizers are limited in their ability to produce droplets in the desired size range. To overcome this limitation, a nebulization process using the expansion of liquid carbon dioxide emulsions is presented. This approach is based on a high-pressure emulsion and a subsequent rapid expansion process, resulting in an aerosol. The investigation was conducted with deionized water as the disperse phase. For the emulsification process, water was injected into liquid carbon dioxide through an orifice. The influence of the nozzle diameter and the water mass load on the droplet size in the emulsion and the aerosol was investigated. Volumetric median droplet diameters in the emulsion were determined to have values between 180 and 730 μm. The nebulization of the water/liquid carbon dioxide emulsion led to an average droplet disintegration factor down to 0.007, which resulted in volumetric median droplet diameters in the aerosol smaller than 10 μm for all water mass loads.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aerosol Filtration and Electrostatic Precipitation · Electrohydrodynamics and Fluid Dynamics · Fluid Dynamics and Heat Transfer
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.