SPRAY CHARACTERISTICS IN A DIRECT-INJECTION DIESEL ENGINE
Source abstract
Abstract
In this study the numerical calculations of the spray characteristics in a direct-injection diesel engine are performed. Calculation parameters are injection pressure, swirl ratio, and breakup model. The breakup models used are the Reitz and Diwakar model and the Taylor analogy breakup (TAB) model. A modified k-e turbulence model which considered the compressibility effect due to the compression and expansion of piston is used. In the quiescent condition, spray tip penetration and spray tip velocity are predicted and compared with the experimental results. There is good agreement between the results of calculation and the experimental data. In the motoring condition, although the evaporation rate is not affected by the swirl ratio variation, it is greatly influenced by the injection pressure variation. Using the TAB model, the evaporation rate is substantially increased at the early stage of spray and the Sauter mean diameter is considerably decreased.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Combustion Engine Technologies · Engineering Applied Research · Vehicle emissions and performance
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.