journal article·2001

DROPLET FORMATION AND SIZE DISTRIBUTIONS FROM AN IMMISCIBLE INTERFACE IMPINGED WITH A VERTICAL NEGATIVELY BUOYANT JET

Peter D. Friedman, A. L. Winthrop, Joseph Katz

Atomization and Sprays· Volume 11· Issue 3
Publisher page

Abstract

When an upward-flowing water jet impinges on an interface with an immiscible layer of lighter oil above it, the jet momentum lifts the interface and forms a cavity. Below a threshold based on Richardson number (Ri) and Reynolds number (Re), no droplets form. Above this threshold, oil drops are formed by two Richardson number-dependent mechanisms. At high Richardson number, an oil lip created at the edge of the cavity detaches to form oil droplets in the water below. At lower Richardson number, the water cavity becomes unstable and alternately collapses and reforms. As the collapsing cavity impacts the interface, it drags down fingers of the upper oil layer, which break into oil droplets. This article contains extensive droplet size distributions for varying Richardson number and Reynolds number and discusses the effects of varying viscosity ratio (h) and Morton number (Mo). Droplet sizes exhibit polydisperse log-normal distributions with mode diameters ranging from 0.6 to 1.5 mm. Characteristic diameters decrease primarily with increasing Re3/Ri, and to a lesser extent with decreasing viscosity ratio. Droplet distributions resulting from the lip pinch-off mechanism have a larger characteristic diameter than those formed by the cavity collapse mechanism.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Fluid Dynamics and Heat Transfer · Fluid Dynamics and Mixing · Electrohydrodynamics and Fluid Dynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.