SPRAY IMPINGEMENT FILM ANALYSIS: CHARACTERISTICS EVALUATION AND CORRESPONDING SIMULATION METHOD
Source abstract
Abstract
Spray impingement is a process during which discrete spray droplets contact a solid surface and form a continuous liquid film. To thoroughly understand such a process is challenging due to the complex gas-liquid-solid interaction and coupling. The liquid converts from a continuous phase into discrete droplets, and finally back to the continuous phase again on the plate. On the basis of experimental analysis, this work investigates a computational fluid dynamics model in the Lagrangian-Eulerian system to focus more on the film dynamics during the impingement. The impingement criterion is modified to incorporate a more accurate momentum transfer within the liquid film. Furthermore, a submodel of droplet slide is coupled into the numerical model to analyze the effect where droplets with a high horizontal velocity will glide away from the plate without contacting it. The numerical model is validated by free spray experiments in the aspects of spray morphology, droplet size, and droplet velocity. Afterward, film dynamics are validated from experimental film thickness measurement with the high-speed laser-induced fluorescence technique. The results show that the modified Bai-Gosman model in the Lagrangian-Eulerian framework can well predict the motion and characteristics of the impingement film, and incorporating the glide model further improves the approximation in many aspects.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Fluid Dynamics and Heat Transfer · Plant Surface Properties and Treatments · Fluid Dynamics Simulations and Interactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Asgari, B. and Amani, E., An Improved Spray-Wall Interaction Model for Eulerian-Lagrangian Simulation of Liquid Sprays, Int. J. Multiphase Flow, vol. 134, p. 103487, 2021.10.1016/j.ijmultiphaseflow.2020.103487 ↗
2. Bai, C.X., Rusche, H., and Gosman, A.D., Modeling of Gasoline Spray Impingement, Atomization Sprays, vol. 12, pp. 1-27, 2002.10.1615/AtomizSpr.v12.i123.10 ↗
3. Bai, C. and Gosman, A.D., Development of Methodology for Spray Impingement Simulation, SAE Tech. Paper No. 950283, 1995.10.4271/950283 ↗
4. Busch, S., Sandia's New Medium-Duty Diesel Research Engine: And What We are Going to Do with It, Sandia National Lab, Livermore, CA, No. SAND2020-1394PE 683492, 2020.
5. Catapano, F., Costa, M., Marseglia, G., Sementa, P., Sorge, U., and Vaglieco, B.M., An Experimental and Numerical Investigation of GDI Spray Impact over Walls at Different Temperatures, SAE Tech. Paper 2016-01-0853,2016.10.4271/2016-01-0853 ↗
6. Ding, C.-P., Sjoberg, M., Vuilleumier, D., Reuss, D.L., He, X., and Bohm, B., Fuel Film Thickness Measurements Using Refractive Index Matching in a Stratified-Charge Si Engine Operated on e30 and Alkylate Fuels, Exp. Fluids, vol. 59, p. 59,2018.10.1007/s00348-018-2512-5 ↗
7. Duronio, F., De Vita, A., Montanaro, A., and Villante, C., Gasoline Direct Injection Engines-A Review of Latest Technologies and Trends. Part 2, Fuel, vol. 265, p. 116947,2020.10.1016/j.fuel.2019.116947 ↗
8. Foltyn, P., Ribeiro, D., Silva, A., Lamanna, G., and Weigand, B., Influence of Wetting Behavior on the Morphology of Droplet Impacts onto Dry Smooth Surfaces, Phys. Fluids, vol. 33, p. 063305,2021.10.1063/5.0053539 ↗
9. Han, Z., Xu, Z., and Trigui, N., Spray/Wall Interaction Models for Multidimensional Engine Simulation, Int. J. Engine Res, vol. 1, pp. 127-146,2020.10.1243/1468087001545308 ↗
10. He, X., Li, Y., Liu, C., Sjoberg, M., Vuilleumier, D., Liu, F., and Yang, Q., Characteristics of Spray and Wall Wetting under Flash-Boiling and Non-Flashing Conditions at Varying Ambient Pressures, Fuel, vol. 264, p. 116683,2020.10.1016/j.fuel.2019.116683 ↗
11. He, X., Li, Y., Sjoberg, M., Vuilleumier, D., Ding, C.-P., Liu, F., and Li, X., Impact of Coolant Temperature on Piston Wall-Wetting and Smoke Generation in a Stratified-Charge DISI Engine Operated on e30 Fuel, Proc. Combust. Inst, vol. 37, pp. 4955-4963,2019.10.1016/j.proci.2018.07.073 ↗
12. Hussain, S. and Lin, S.-Y., Impingement of Aqueous Film Forming Foam (AFFF) Solution Drops on Wood: Wetting and Splash, J. Indust. Eng. Chem, vol. 88, pp. 356-365,2020.10.1016/j.jiec.2020.05.004 ↗
13. Li, X., Pan, H., Dong, X., Hung, D., and Xu, M., Spray Impingement Wall Film Breakup by Wave Entrainment, Proc. Combust. Inst., vol. 37, no. 3, pp. 3287-3294,2019a.10.1016/j.proci.2018.07.101 ↗
14. Li, X., Xiao, D., Parrish, S.E., Grover, R.O., Jr., Hung, D.L.S., and Xu, M., Dynamics of Spray Impingement Wall Film under Cold Start Conditions, Int. J. Engine Res, vol. 21, no. 2, pp. 319-329,2019b.10.1177/1468087419859682 ↗
15. Li, Y., Huang, Y., Luo, K., Liang, M., and Lei, B., Development and Validation of an Improved Atomization Model for GDI Spray Simulations: Coupling Effects of Nozzle-Generated Turbulence and Aerodynamic Force, Fuel, vol. 299, p. 120871,2021.10.1016/j.fuel.2021.120871 ↗
16. Lu, L., Pei, Y., Qin, J., Peng, Z., Wang, Y., and Zhu, Q., Impingement Behaviour of Single Ethanol Droplet on a Liquid Film of Glycerol Solution, Fuel, vol. 276, p. 117820,2020.10.1016/j.fuel.2020.117820 ↗
17. Luo, H., Nishida, K., and Ogata, Y., Evaporation Characteristics of Fuel Adhesion on the Wall after Spray Impingement under Different Conditions through Rim Measurement System, Fuel, vol. 258, p. 116163, 2019.10.1016/j.fuel.2019.116163 ↗
18. Ma, D., Chang, S., Wu, K., and Song, M., Experimental Study on the Water Film Thickness under Spray Impingement Based on Planar LIF, Int. J. Multiphase Flow, vol. 130, p. 103329,2020.10.1016/j.ijmultiphaseflow.2020.103329 ↗
19. Ma, T., Feng, L., Wang, H., Liu, H., and Yao, M., Analysis of near Wall Combustion and Pollutant Migration after Spray Impingement, Int. J. Heat Mass Transf, vol. 141, pp. 569-579,2019.10.1016/j.ijheatmasstransfer.2019.07.001 ↗
20. Meredith, K., de Vries, J., Wang, Y., and Xin, Y., A Comprehensive Model for Simulating the Interaction of Water with Solid Surfaces in Fire Suppression Environments, Proc. Combust. Inst., vol. 34, no. 2, pp. 2719-2726,2013.10.1016/j.proci.2012.06.094 ↗
21. Meredith, K., Xin, Y., and de Vries, J., A Numerical Model for Simulation of Thin-Film Water Transport over Solid Fuel Surfaces, Fire Safety Sci., vol. 10, pp. 415-428,2011.10.3801/IAFSS.FSS.10-415 ↗
22. Mohan, B., Badra, J., Sim, J., and Im, H.G., Coupled In-Nozzle Flow and Spray Simulation of Engine Combustion Network Spray-G Injector, Int. J. Engine Res., vol. 22, no. 9, pp. 2982-2996,2021.10.1177/1468087420960612 ↗
23. Montanaro, A., Allocca, L., Costa, M., and Sorge, U., Assessment of a 3D CFD Model for GDI Spray Impact against Wall through Experiments Based on Different Optical Techniques, Int. J. Multiphase Flow, vol. 84, pp. 204-216,2016a.10.1016/j.ijmultiphaseflow.2016.05.007 ↗
24. Montanaro, A., Allocca, L., Lazzaro, M., and Meccariello, G., Impinging Jets of Fuel on a Heated Surface: Effects of Wall Temperature and Injection Conditions, SAE Tech. Paper No. 2016-01-0863,2016b.10.4271/2016-01-0863 ↗
25. Naber, J.D. and Reitz, R.D., Modeling Engine Spray/Wall Impingement, SAE Trans., vol. 97, pp. 118-140, 1988.10.4271/880107 ↗
26. O'Rourke, P.J. and Amsden, A.A., A Spray/Wall Interaction Submodel for the Kiva-3 Wall Film Model, SAE Tech. Paper No. 2000-01-0271,2000.10.4271/2000-01-0271 ↗
27. Okawa, T., Kawai, K., Kubo, K., and Kitabayashi, S., Fundamental Characteristics of Secondary Drops Produced by Early Splash during Single-Drop Impingement onto a Thick Liquid Film, Exp. Therm. Fluid Sci., vol. 131, p. 110533,2022.10.1016/j.expthermflusci.2021.110533 ↗
28. Pan, H., Xiao, D., Hung, D., Xu, M., and Li, X., Experimental Investigations of Wall Jet Droplet Impact on Spray Impingement Fuel Film Formation, Fuel, vol. 241, pp. 33-41,2019.10.1016/j.fuel.2018.12.021 ↗
29. Pickett, L.M., Spray Wall Interactions and Soot Formation, Sandia National Lab., Livermore, CA, No. SAND2020-4744PE 685904,2020.
30. Pickett, L.M., Fuel Spray Mixing and Wall Interaction, Sandia National Lab., Livermore, CA, No. SAND2021-5727R 696121,2021.10.2172/1783202 ↗
31. Povarov, O.A., Nazarov, O.I., Ignat'evskaya, L.A., andNikol'skii, A.I., Interaction of Drops with Boundary Layer on Rotating Surface, J. Eng. Phys, vol. 31, no. 6, pp. 1453-1456,1976.10.1007/BF00860580 ↗
32. Qiu, S., Xiao, D., Zhang, X., Wang, S., Li, X., and Xu, M., Phase Change Impacts on Flash Boiling Spray Propagations and Impingements, Fuel, vol. 312, p. 122871,2022.10.1016/j.fuel.2021.122871 ↗
33. Rachakonda, S.K., Wang, Y., and Schmidt, D.P., Flash-Boiling Initialization for Spray Simulations Based on Parametric Studies, Atomization Sprays, vol. 28, no. 2, pp. 111-140,2018.10.1615/AtomizSpr.2018020769 ↗
34. Roy, C.J., Grid Convergence Error Analysis for Mixed-Order Numerical Schemes, AIAA J., vol. 41, no. 4, pp. 595-604,2003.10.2514/2.2013 ↗
35. Schulz, F. and Beyrau, F., Comparison of the Spray and the Spray/Wall Interaction of Two Gasoline Injectors, Int. J. Auto. Technol, vol. 19, no. 4, pp. 615-622,2018.10.1007/s12239-018-0058-4 ↗
36. Senda, J., Kobayashi, M., Iwashita, S., and Fujimoto, H., Modeling of Diesel Spray Impingement on a Flat Wall, SAE Tech. Paper No. 941894,1994.
37. Skeen, S., Pickett, L., Watanabe, N., Maes, N., Kurimoto, N., Sasaki, S., and Cenker, E., Visualization of Soot Formation and Oxidation in Free- and Wall-Impinging High-Pressure Sprays of n-Dodecane, Sandia National Lab., Livermore, CA, No. SAND2019-3819C 674421,2019.
38. Stanton, D.W. and Rutland, C.J., Modeling Fuel Film Formation and Wall Ineraction in Diesel Engines, SAE Tech. Paper No. 960628,1996.10.4271/960628 ↗
39. Tomomatsu, Y., Kawahara, N., and Tomita, E., Fuel Spray Impingement and Liquid Film Formation in a Gasoline Direct-Injection Spark-Ignition Engine, Int. J. Environ. Sci. Technol, vol. 20, pp. 477-488, 2022.10.1007/s13762-022-04010-4 ↗
40. Wang, N., Chang, X., Ma, R., and Zhang, L., Verification and Validation of Hyperflow Solver for Subsonic and Transonic Turbulent Flow Simulations on Unstructured/Hybrid Grids, Chin. J. Theor. Appl. Mech, vol. 51, no. 3, pp. 813-825,2019.
41. Wang, C., Pei, Y., Qin, J., Peng, Z., Liu, Y., Xu, K., and Ye, Z., Laser Induced Fluorescence Investigation on Deposited Fuel Film from Spray Impingement on Viscous Film over a Solid Wall, Energy, vol. 231, p. 120893,2021.10.1016/j.energy.2021.120893 ↗
42. Wang, S., Cao, J., Yang, S., Li, X., Hung, D.L.S., andXu, M., Post Processing Method for Lagrangian Spray Field Based on Mie Scattering Theory, Int. Conf. on Liquid Atomization and Spray Systems (ICLASS), Edinburgh, Scotland, 2021.10.2218/iclass.2021.6077 ↗
43. Xiao, D., Qiu, S., Hung, D., Li, X., Nishida, K., and Xu, M., Evaporation and Condensation of Flash Boiling Sprays Impinging on a Cold Surface, Fuel, vol. 287, p. 119423,2021.10.1016/j.fuel.2020.119423 ↗
44. Xiao, D., Qiu, S., Zhang, X., Zhang, Y., Li, X., Hung, D., and Xu, M., Dynamic Behavior and Mechanism Analysis of Tip Wetting Process under Flash Boiling Conditions, Fuel, vol. 307, p. 121773,2022.10.1016/j.fuel.2021.121773 ↗
45. Zhang, Y., Jia, M., Liu, H., and Xie, M., Development of an Improved Liquid Film Model for Spray/Wall Interaction under Engine-Relevant Conditions, Int. J. Multiphase Flow, vol. 79, pp. 74-87, 2016.10.1016/j.ijmultiphaseflow.2015.10.002 ↗