EFFECTS OF KEY PARAMETERS ON VISCOUS HOLLOW CONE SPRAY ANGLE AND AVAILABLE CORRELATION FOR SPRAY ANGLE PREDICTION
Source abstract
Abstract
Pressure swirl atomizers are widely applied in daily life and production activities. The spray angle is one of the most important parameters for the pressure swirl atomizers and mainly affects the spatial distribution of sprays and droplets. The quick prediction of the spray angle is important for the design and optimization of a pressure swirl atomizer. In the present study, the effects of length of swirl chamber, liquid viscosity and pressure differential on the hollow cone spray angle are studied by experiments. An available semi-empirical correlation for hollow cone spray angle prediction is derived by proper assumptions and simplification. This available correlation is validated by comparison with the experimental results. Besides, other correlations based on inviscid flow and viscous flow are also introduced to predict the spray angle for comparison. Based on the experimental results, the measured hollow cone spray angle decreases with the increasing of length of swirl chamber and liquid viscosity nonlinearly. The measured hollow cone spray angle shows no obvious growth with the increasing of the pressure differential when the pressure differential reaches a critical value. Further, the hollow cone spray angles predicted by the present available correlation agree well with the experimental results. The prediction uncertainties can be within ±15% for all cases. While, the prediction uncertainties are no less than ±40% by other correlations. Compared with previous correlations, the present available correlation can achieve better prediction accuracy. This available correlation is capable for the quick prediction of the viscous hollow cone spray angle.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Fluid Dynamics and Heat Transfer · Plant Surface Properties and Treatments · Particle Dynamics in Fluid Flows
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Abramovich G.N. · 1944
2. Ashgriz N. · 201110.1007/978-1-4419-7264-4 ↗
3. Characterization of the Spray Cone Angles of Fuels with Nanoparticle Additives
4. Analysis of Backlight Images for Spray Measurement: How to Accurately Identify the Liquid-Gas Interface in Images
5. The Principle of Similitude10.1038/096396d0 ↗
6. Factors Influencing the Effective Spray Cone Angle of Pressure-Swirl Atomizers10.1115/1.2906313 ↗
7. The Principle of Maximum Flow for a Swirl Atomizer and Its Use in the Exposition and Comparison of Early Flow Analyses10.1615/AtomizSpr.v19.i3.40 ↗
8. An Appraisal of Swirl Atomizer Inviscid Flow Analysis, Part 2: Inviscid Spray Cone Angle Analysis and Comparison of Inviscid Methods with Experimental Results for Discharge Coefficient, Air Core Radius, and Spray Cone Angle10.1615/AtomizSpr.v19.i3.50 ↗
9. Giffen,E. and Massey, B.S., Report 1950/5, Motor Industry Research Association, Nuneaton, UK, 1950.
10. Giffen E. · 1953
11. Analysis of Viscous Fluid Flow in a Pressure-Swirl Atomizer Using Large-Eddy Simulation10.1016/j.ijmultiphaseflow.2018.10.008 ↗
12. Lefebvre A.H. · 1989
13. Flow Analysis of a Hollow Cone Nozzle with Potential Flow Theory
14. Development of a Mathematical Model and 3D Numerical Simulation of the Internal Flow in a Conical Swirl Atomizer10.1615/AtomizSpr.2013007495 ↗
15. Internal Flow Characteristics of Simplex Swirl Atomizers10.2514/3.22780 ↗
16. Prediction of Velocity Coefficient and Spray Cone Angle for Simplex Swirl Atomizers
17. Improved Semi-Empirical Prediction of Viscous Spray Cone Angle for Pressure Swirl Atomizers10.1615/AtomizSpr.2017019727 ↗
18. The Mechanics of Swirl Atomizers
19. Taylor J.R. · 1997
20. Viscous Flow through the Swirl Chamber of a Pressure-Swirl Atomizer10.1016/j.ijmultiphaseflow.2013.02.003 ↗
21. Spray Characteristics of Pressure-Swirl Nozzles at Different Nozzle Diameters10.1016/j.applthermaleng.2017.04.089 ↗