EXPERIMENTAL AND COMPUTATIONAL ANALYSIS OF n-DECANE SPRAY CHARACTERISTICS DISCHARGED FROM A PRESSURE-SWIRL NOZZLE INTO AEROENGINE-LIKE CONDITIONS
Source abstract
Abstract
The spray characteristics of a pressure-swirl nozzle have an important impact on the performance of an aeroengine. In this work, the spray experiment of a pressure-swirl nozzle was conducted in a constant volume chamber to mimic the combustion chamber environment of a real aeroengine. n-Decane, chosen as a surrogate of aviation fuel, was injected into different environmental conditions to analyze its spray characteristics. A coupling numerical method, using the Euler continuum model for the flow inside the nozzle and the Lagrange discrete phase model for the external spray, was implemented to simulate the fuel injection process under the same environmental conditions as the experiment. The results show that the interface of the gas-liquid two-phase flow becomes larger with the increase of environmental pressure Penv, while the gradients of axial velocity Vz and tangential velocity Vθ decrease. The spray cone angle decreases rapidly and remains nearly unchanged with the increase of Penv. This coupling numerical method underestimated the specific value of the spray cone angle but can closely predict the trend of spray cone angle with the increase of Penv. Generally, this work is valuable for the design of fuel injection systems of aeroengines.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Combustion and flame dynamics · Fluid Dynamics and Heat Transfer · Icing and De-icing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Amsden, A.A., O'Rourke, P. J., and Butler, T.D., Computer Program for Chemically Reactive Flows with Sprays, Los Alamos National Laboratory Technical Report LA-11560-MS, Los Alamos National Laboratory, 1989.
2. Bayvel, L. and Orzechowski, Z., Liquid Atomization, London, UK: Taylor & Francis, 1993.
3. Benjamin, M.A. and Mansour, A., Film Thickness, Droplet Size Measurements and Correlations for Large Pressure-Swirl Atomizers, J. ASME/IGTIC Conf., Stockholm, Sweden, 1998.10.1115/98-GT-537 ↗
4. Bruno, T.J. and Smith, B.L., Evaluation of the Physicochemical Authenticity of Aviation Kerosene Surrogate Mixtures, Energy Fuel, vol. 24, pp. 4266-4284,2010.
5. Convergent-Science, Converge 2.4 Manual, Convergent Science, 2018.
6. Dash, S.K., Halder, M.R., Peric, M., and Som, S.K., Formation of Air Core in Nozzles with Tangential Entry, J. Fluid Eng. Trans. ASME, vol. 123, pp. 829-835,2001.10.1115/1.1412845 ↗
7. Datta, A. and Som, S.K., Numerical Prediction of Air Core Diameter, Coefficient of Discharge and Spray Cone Angle of a Swirl Spray Pressure Nozzle, Int. J. Heat Mass Transf., vol. 21, pp. 412-419,1999.10.1016/S0142-727X(00)00003-5 ↗
8. DeCorso, S.M., Effect of Ambient and Fuel Pressure on Spray Drop Size, ASME J. Eng. Power, vol. 82, p. 10,1960.10.1115/1.3672710 ↗
9. Dombrowski, N. and Johns, W.R., The Aerodynamic Instability and Disintegration of Viscous Liquid Sheets, Chem. Eng. Sci., vol. 18, no. 3, pp. 203-214,1963.10.1016/0009-2509(63)85005-8 ↗
10. Dombrowski, N. and Hooper, P.C., The Effect of Ambient Density on Drop Formation in Sprays, Chem. Eng. Sci, vol. 17, no. 5, pp. 291-305,1962.10.1016/0009-2509(62)85008-8 ↗
11. Dooley, S., Wona, S.H., Chaos, M., Heyne, J., Ju, Y., Dryer, F.L., Kumar, K., Sung, C.-J., Wang, H., Oehlschlaeger, M.A., Santoro, R.J., and Litzinger, T.A., A Jet Fuel Surrogate Formulated by Real Fuel Properties, Combust. Flame, vol. 157, pp. 2333-2339,2010.
12. Fu, P., Hou, L., Ren, Z., Zhang, Z., Mao X., and Yu, Y., A Droplet/Wall Impact Model and Simulation of a Bipropellant Rocket Engine, Aerosp. Sci. Technol., vol. 88, pp. 32-39,2019.10.1016/j.ast.2019.03.018 ↗
13. Fu, Q.-F. and Yang, L.-J., Visualization Studies of the Spray from Swirl Injectors under Elevated Ambient Pressure, Aerosp. Sci. Technol., vol. 47, pp. 154-163,2015.10.1016/j.ast.2015.09.027 ↗
14. Ghobad, A., Liquid Flow in a Simplex Swirl Nozzle, Int. J. Multiphase Flow, vol. 79, pp. 225-235,2016.10.1016/j.ijmultiphaseflow.2015.09.004 ↗
15. Guildenbecher, D.R., Rachedi, R.R., and Sojka, P.E., Pressure-Scaling of Pressure-Swirl Atomizer Cone Angles, J. Eng. Gas. Turb. Power, vol. 130, no. 6, p. 061501,2006.
16. Huber, M.L., Lemmon, E.W., and Bruno, T. J., Surrogate Mixture Models for the Thermophysical Properties of Aviation Fuel Jet-A, Energy Fuel, vol. 24, pp. 3565-3571,2010.
17. Huber, M.L., Smith, B.L., Ott, L.S., and Bruno, T.J., Surrogate Mixture Model for the Thermophysical Properties of Synthetic Aviation Fuel S-8: Explicit Application of the Advanced Distillation Curve, Energy Fuel, vol. 22, pp. 1104-1114,2008.
18. Issa, R.I., Ahmadi-Befrui, B., Beshay, K.R., and Gosman, A.D., Solution of the Implicitly Discretised Reacting Flow Equations by Operator-Splitting, J. Comput. Phys, vol. 62, pp. 40-65,1991.10.1016/0021-9991(86)90099-9 ↗
19. Jedelsky, J., Maly, M., Pinto del Corral, N., Wigley, G., Janackova, L., and Jicha, M., Air-Liquid Interactions in a Pressure-Swirl Spray, Int. J. Heat Mass Transf., vol. 121, pp. 788-804,2018.10.1016/j.ijheatmasstransfer.2018.01.003 ↗
20. Jeng, S.M., Jog, M.A., and Benjamin, M.A., Computational and Experimental Study of Liquid Sheet Emanating from Simplex Fuel Nozzle, AIAA J, vol. 36, no. 2, pp. 201-207,1998.10.2514/2.7502 ↗
21. Kim, D., Im, J.-H., Koh, H., and Yoon, Y., Effect of Ambient Gas Density on Spray Characteristics of Swirling Liquid Sheets, J. Propul. Power, vol. 23, no. 3, pp. 603-613,2007.10.2514/1.20161 ↗
22. Kim, D., Martz, J., and Violi, A., A Surrogate for Emulating the Physical and Chemical Properties of Conventional Jet Fuel, Combust. Flame, vol. 161, pp. 1489-1498,2014.
23. Kim, D., Martz, J., Abdul-Nour, A., Yu, X., Jansons, M., and Violi, A., A Six-Component Surrogate for Emulating the Physical and Chemical Characteristics of Conventional and Alternative Jet Fuels and Their Blends, Combust. Flame, vol. 179, pp. 86-94,2017.10.1016/j.combustflame.2017.01.025 ↗
24. Kim, S., Khil, T., Kim, D., and Yoon, Y., Effect of Geometric Parameters on the Liquid Film Thickness and Air Core Formation in a Swirl Injector, Meas. Sci. Technol, vol. 20, no. 1, pp. 187-188,2008.10.1088/0957-0233/20/1/015403 ↗
25. Li, C., Li, C., Xiao, F., Li, Q., and Zhu, Y., Experimental Study of Spray Characteristics of Liquid Jets in Supersonic Crossflow, Aerosp. Sci. Technol, vol. 95, p. 105426,2019.
26. Li, C., Li, P., Li, C., Li, Q., and Zhou, Y., Experimental and Numerical Investigation of Cross-Sectional Structures of Liquid Jets in Supersonic Crossflow, Aerosp. Sci. Technol., vol. 103, p. 105926,2020.
27. National Institute of Standards and Technology, National Institute of Standards and Technology database, accessed April 25, from https://www.nist.gov/, 2021.
28. Nowruzi, H., Ghassemi, H., Amini, E., and Sohrabiasl, I., Prediction of Impinging Spray Penetration and Cone Angle under Different Injection and Ambient Conditions by Means of CFD and ANNs, J. Braz. Soc. Mech. Sci, vol. 39, no. 10, pp. 3863-3880,2017.
29. O'Rourke, P.J., Collective Drop Effects on Vaporizing Liquid Sprays, PhD, Princeton University, 1981.
30. Ortman, J. and Lefebvre, A.H., Fuel Distributions from Pressure-Swirl Atomizers, J. Propul. Power, vol. 1, no. 1,pp. 11-15,1985.10.2514/3.22752 ↗
31. Otsu, N., A Threshold Selection Method from Gray-Level Histograms, IEEE T. Syst., vol. 9, no. 1, pp. 62-66,1979.10.1109/TSMC.1979.4310076 ↗
32. Qin, C. and Loth, E., Numerical Description of a Pressure-Swirl Nozzle Spray, Chem. Eng. Process, vol. 107, pp. 68-79,2016.10.1016/j.cep.2016.06.009 ↗
33. Ruan, C., Chen, F., Cai, W., Qian, Y., Yu, L., andLu, X., Principles of Non-Intrusive Diagnostic Techniques and Their Applications for Fundamental Studies of Combustion Instabilities in Gas Turbine Combustors: A Brief Review, Aerosp. Sci. Technol., vol. 84, pp. 585-603,2019.10.1016/j.ast.2018.10.002 ↗
34. Santolaya, J.L., Aisa, A., Calvo, E., Garcia, I., and Cere, L.M., Experimental Study of Near-Field Flow Structure in Hollow Cone Pressure Swirl Sprays, J. Propul. Power, vol. 23, no. 2, pp. 382-389,2007.10.2514/1.20713 ↗
35. Senecal, P.K., Schmidt, D.P., Nouar, I., Rutland, C.J., and Reitz, R.D., Modeling High-Speed Viscous Liquid Sheet Atomization, Int. J. Multiphase Flow, vol. 25, nos. 6-7, pp. 1073-1097,1999.
36. Schmidt, D.P. and Rutland, C.J., A New Droplet Collision Algorithm, J. Comput. Phys., vol. 164, no. 1, pp. 62-80, 2000.10.1006/jcph.2000.6568 ↗
37. Zhou, Z.-F., Lu, G.-Y., Zhu, D.-Q., Zhang, L., Wang, J.-F., and Chen, B., The Performance of Droplet Evaporation Model in Predicting Droplet Dynamics and Thermal Characteristics for R134a Single Isolated Droplet and Two-Phase Flashing Spray, Aerosp. Sci. Technol, vol. 93, pp. 105363,2019.