A COMBINED ANALYTICAL/NUMERICAL APPROACH TO THE MODELING OF THE PROCESSES LEADING TO PUFFING AND MICRO-EXPLOSION IN A COMPOSITE MULTI-COMPONENT FUEL/WATER DROPLET
Source abstract
Abstract
The previously developed analytical/numerical model for predicting heat transfer and component diffusion in composite multi-component droplets is adjusted for use in practical engineering applications related to the analysis of droplet heating and evaporation and the onset of puffing and micro-explosions in those droplets. This adjustment allowed us to gain new insights into the previously developed models of these processes. The focus of the analysis is on kerosene/water droplets. It is demonstrated that the number of terms in the series in the analytical solution to the heat transfer equation can be reduced to just one or two to ensure that the maximal error of the model prediction does not exceed 1%, unless we are interested in the processes at the very start of heating. At the same time, the minimal number of terms in the series in the analytical solution to the component diffusion equation should be at least seven to ensure that the errors of the prediction of the numerical code do not exceed 3%. It is shown that, to ensure that the analytical/numerical code predicts physically consistent results, the maximal absolute error of calculation of the eigenvalues based on the bisection method cannot exceed 10-7. It is shown that using these limiting values for each of these input parameters leads to about 50%-75% reduction in the CPU time required to obtain results close to those which were obtained using the nonoptimized version of the numerical code. The overall reduction in CPU time can be up to about 95%. The predictions of the adjusted analytical/numerical code are validated against in-house experimental data and data available in the literature.
Source: openalex_inverted_index · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Combustion and flame dynamics · Combustion and Detonation Processes · Rocket and propulsion systems research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Abramzon, B. and Sirignano, W., Droplet Vaporization Model for Spray Combustion Calculations, Int. J. Heat Mass Transf., vol. 32, pp. 1605-1618, 1989.10.1016/0017-9310(89)90043-4 ↗
2. Antonov,D., Kuznetsov, G., Strizhak, P., Rybdylova,O., and Sazhin, S.,Micro-Explosion and Autoignition of Composite Fuel/Water Droplets, Combust. Flame, vol. 210, pp. 479-489, 2019a.10.1016/j.combustflame.2019.09.004 ↗
3. Antonov, D., Piskunov, M., and Strizhak, P., Breakup and Explosion of Droplets of Two Immiscible Fluids and Emulsions, Int. J. Therm. Sci., vol. 142, pp. 30-41, 2019b.10.1016/j.ijthermalsci.2019.04.011 ↗
4. Castanet, G., Antonov, D., Strizhak, P., and Sazhin, S., Effects of Water Subdroplet Location on the Start of Puffing/Micro-Explosion in Composite Fuel-Water Droplets, Int. J. Heat Mass Transf., vol. 186, p. 122466, 2022.10.1016/j.ijheatmasstransfer.2021.122466 ↗
5. Castanet, G., Antonov, D., Zubrilin, I., Strizhak, P., and Sazhin, S., Effects of Water Subdroplet Location on the Start of Puffing/Micro-Explosion in CompositeMulti-Component Fuel-Water Droplets, Fuel, vol. 341, p. 127609, 2023.10.1016/j.fuel.2023.127609 ↗
6. Chapra, S. and Canale, R., Numerical Methods for Engineers, 8th ed., New York: McGraw-Hill Education, 2020.
7. Chen, X., Xi, X., Xiao, G., Zhang, L., Wang, Z., and Long, W., Effect of Ambient Temperature and Water Content on Emulsified Heavy Fuel Oil Droplets Evaporation: Evaporation Enhancement by Droplet Puffing and Micro-Explosion, Fuel, vol. 334, p. 126614, 2023.10.1016/j.fuel.2022.126614 ↗
8. Collatz, L., Eigenwertaufgaben Mit Technischen Anwendungen, 2., Durchgesehene Auflage, Leipzig, Germany: Akademische Verlagsgesellschaft Geest & Portig, 1963.
9. Cossali, G. and Tonini, S., Drop Heating and Evaporation: Analytical Solutions in Curvilinear Coordinate Systems, Berlin: Springer, 2021.10.1007/978-3-030-49274-8 ↗
10. Fostiropoulos, S., Strotos, G., Nikolopoulos, N., and Gavaises, M., A Simple Model for Breakup Time Prediction of Water-Heavy Fuel Oil Emulsion Droplets, Int. J. Heat Mass Transf., vol. 164, p. 120581, 2021.10.1016/j.ijheatmasstransfer.2020.120581 ↗
11. Girin, O., Dynamics of the Emulsified Fuel Droplet Micro-Explosion, Atomization Sprays, vol. 27, pp. 407-422, 2017.10.1615/AtomizSpr.2017017143 ↗
12. Michaelides, E., Particles, Bubbles & Drops, Hoboken, NJ: World Scientific, 2006.10.1142/6018 ↗
13. Pinheiro, A., Rybdylova, O., Zubrilin, I., Sazhin, S., Filho, F., and Vedovotto, J., Modelling of Aviation Kerosene Droplet Heating and Evaporation Using Complete Fuel Composition and Surrogates, Fuel, vol. 305, p. 121564, 2021.10.1016/j.fuel.2021.121564 ↗
14. Rybdylova, O., Poulton, L., Qubeissi, M.A., Elwardany, A., Crua, C., Khan, T., and Sazhin, S., A Model for Multi-ComponentDroplet Heating and Evaporation and Its Implementation into ANSYS Fluent, Int. Commun. Heat Mass Transf., vol. 90, pp. 29-33, 2018.10.1016/j.icheatmasstransfer.2017.10.018 ↗
15. Sazhin, S., Droplets and Sprays: Simple Models of Complex Processes, Berlin: Springer, 2022.10.1007/978-3-030-99746-5 ↗
16. Sazhin, S., Bar-Kohany, T., Nissar, Z., Antonov, D., Strizhak, P., and Rybdylova, O., A New Approach to Modelling Micro-Explosions in Composite Droplets, Int. J. Heat Mass Transf., vol. 161, p. 120238, 2020.10.1016/j.ijheatmasstransfer.2020.120238 ↗
17. Sazhin, S., Shchepakina, E., Sobolev, V., Antonov, D., and Strizhak, P., Puffing/Micro-Explosion in Composite Multi-Component Droplets, Int. J. Heat Mass Transf., vol. 184, p. 122210, 2022.10.1016/j.ijheatmasstransfer.2021.122210 ↗
18. Shinjo, J., Xia, J., Ganippa, L., and Megaritis, A., Puffing-Enhanced Fuel/Air Mixing of an Evaporating n-Decane/Ethanol Emulsion Droplet and a Droplet Group under Convective Heating, J. Fluid Mech., vol. 793, pp. 444-476, 2016.10.1017/jfm.2016.130 ↗
19. Strizhak, P., Volkov, R., Castanet, G., Lemoine, F., Rybdylova,O., and Sazhin, S., Heating and Evaporation of SuspendedWater Droplets: Experimental Studies and Modelling, Int. J. Heat Mass Transf., vol. 127, pp. 92-106, 2018.10.1016/j.ijheatmasstransfer.2018.06.103 ↗
20. Watanabe, H. and Okazaki, K., Visualization of Secondary Atomization in Emulsified-Fuel Spray Flow by Shadow Imaging, Proc. Combust. Inst., vol. 34, no. 1, pp. 1651-1658, 2013.10.1016/j.proci.2012.07.005 ↗
21. Watanabe, H., Suzuki, Y., Harada, T., Aoki, H., and Miura, T., Development of a Mathematical Model for Predicting Water Vapor Mass Generated in Micro-Explosion, Energy, vol. 36, no. 7, pp. 4089-4096, 2011.10.1016/j.energy.2011.04.038 ↗