NUMERICAL STUDY ON THE EFFECTS OF DUAL-LAYER LIQUID SHEETS MERGING ON PRIMARY BREAKUP IN DUAL-ORIFICE NOZZLES
Source abstract
Abstract
Primary breakup during atomization is governed by complex mechanisms and is not well understood. Detailed numerical simulations using the volume-of-fluid method augmented with adaptive mesh refinement techniques were performed to study the formation and disintegration of liquid sheets produced from a dual-orifice pressure-swirl atomizer. The calculated atomization characteristics agree with the experimental results given a maximum relative error for the spray cone angle of 4.9% and maximum relative error for the Sauter mean diameter of 7.4%. For the five considered cases, changes in the pressure drop over a certain range do not affect the final spray angle size, but larger pressure drops will cause the liquid sheet to open faster while delaying the merger of the liquid sheets. The perturbation wave that causes the primary breakup of the dual-layer liquid sheets consists of two parts: the initial perturbation wave and the perturbation wave originating from the merger of the dual-layer liquid sheets, which dominates their primary breakup but whose generation is delayed by an increased pressure drop. The axial position when the disturbance wave first grows to its maximum amplitude matches well with the liquid sheet breakup length with a maximum error of 11.9%. Research on the merger of liquid sheets helps to further study the mechanisms of dual-layer liquid sheet primary breakup and guide the understanding of atomization in dual-orifice pressure-swirl atomizers.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Fluid Dynamics and Heat Transfer · Plant Surface Properties and Treatments · Particle Dynamics in Fluid Flows
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Numerical Investigation of Multiphase Flow inside a Pressure Swirl Atomizer at the Initial Stage of Injection10.1615/AtomizSpr.2018022872 ↗
2. A Second-Order Projection Method for the Incompressible Navier-Stokes Equations10.1016/0021-9991(89)90151-4 ↗
3. New Insights into Large Eddy Simulation10.1016/0169-5983(92)90023-P ↗
4. On the Convergence ofDiscrete Approximations to the Navier-Stokes Equations10.1090/S0025-5718-1969-0242393-5 ↗
5. Kelvin Helmholtz Wave Growth on Cylindrical Sheets10.1017/S0022112075001784 ↗
6. Direct Numerical and Large-Eddy Simulation of Primary Atomization in Complex Geometries10.1615/AtomizSpr.2013007679 ↗
7. Ding, J.W., Study on Stability and Liquid Sheet Breakup Mechanism of Liquid/Liquid Coaxial Swirling Jets, PhD, Beijing Jiaotong University, 2017.
8. Linear Stability Analysis of a Conical Liquid Sheet10.2514/1.48346 ↗
9. Towards Adaptive Grids for Atmospheric Boundary-Layer Simulations10.1007/s10546-018-0335-9 ↗
10. Hou X.C. · 2002 · 62
11. Impinging Jets Atomization10.1063/1.857840 ↗
12. Characteristics of Liquid Film and Spray Injected from Swirl Coaxial Injector10.2514/2.6151 ↗
13. Numerical Study of the Primary Breakup of a Plane Liquid Sheet with Co-flowing Air Streams10.1002/pamm.201210245 ↗
14. Semi-Analytical Prediction of Macroscopic Characteristics of Open-End Pressure-Swirl Injector10.1016/j.ast.2018.08.037 ↗
15. Numerical Simulation of Primary Break-Up and Atomization: DNS and Modelling Study10.1016/j.ijmultiphaseflow.2008.11.005 ↗
16. Lefebvre A.H. · 2017 · 7110.1201/9781315120911-4 ↗
17. Lefebvre A.H. · 2017 · 11210.1201/9781315120911 ↗
18. A Comprehensive Model to Predict Simplex Atomizer Performance10.1115/1.2817119 ↗
19. Numerical Investigation for Effect of Structural Parameters on Nozzle Performance
20. Liu, J., Experimental and Numerical Simulation of the Breakup Process of Swirling Conical Liquid Sheet, PhD, National University of Defense Technology, 2012.
21. Numerical Simulation of Flow Field in Pressure-Swirl Injector Based on VOF Interface Tracking Method
22. How the Nozzle Geometry Impacts Vortex Breakdown in Compressible Swirling-Jet Flows10.2514/1.J053843 ↗
23. Analysis of Primary Breakup Images from an Engine-Related Sheet Atomizer10.1615/AtomizSpr.2016015909 ↗
24. Numerical Simulation of Heavy Fuel Oil Atomization using a Pulsed Pressure-Swirl Injector10.1016/j.cjche.2020.07.053 ↗
25. Gerris: A Tree-Based Adaptive Solver for the Incompressible Euler Equations in Complex Geometries10.1016/S0021-9991(03)00298-5 ↗
26. An Accurate Adaptive Solver for Surface-Tension-Driven Interfacial Flows10.1016/j.jcp.2009.04.042 ↗
27. Direct Simulations of Liquid Sheet Breakup in Planar Gas Blast Atomization10.1615/AtomizSpr.2016014309 ↗
28. A Parametrical Study of the Breakup and Atomization Process of Two Impinging Liquid Jets10.1615/AtomizSpr.2017020941 ↗
29. Pressure-Swirl Atomization in the Near Field
30. Instability of an Annular Viscous Liquid Jet10.1007/BF01170402 ↗
31. Numerical Study of the Primary Breakup Characteristics Dual-Layer Rotating Conical Liquid Sheet
32. Simulation of Liquid Jet Primary Breakup: Dynamics ofLigament and Droplet Formation10.1016/j.ijmultiphaseflow.2010.03.008 ↗
33. A Numerical Study of an Annular Liquid Jet in a Compressible Gas Medium10.1016/j.ijmultiphaseflow.2007.10.010 ↗
34. Aerodynamic Breakup of Liquid Jets-A Review10.2514/6.1990-1616 ↗
35. Similarity between the Primary and Secondary Air-Assisted Liquid Jet Breakup Mechanisms
36. Numerical Simulation of Internal Flow Process in Pressure-Swirl Injector
37. On the Achievements and Prospects for the Methods of Computation Fluid Dynamics
38. Three-Dimensional Stability of an Annular Viscous Liquid Jet in Compressible Gas
39. Periodic Atomization Characteristics of an Impinging Jet Injector Element Modulated by Klystron Effect10.1016/j.cja.2018.07.011 ↗