journal article·2014

RESPONSE OF LIQUID JET TO MODULATED CROSSFLOW

Jinkwan Song, Chandrasekar Ramasubramanian, Jong Guen Lee

Atomization and Sprays· Volume 24· Issue 2
Publisher page

Abstract

Experimental results on the response of spray formed by the liquid (Jet A) jet injection into a crossflow (air) is presented with a special emphasis on its response to the modulating crossflow. The pressure of the chamber is up to 3.5 atm, and the corresponding Weber number is up to 510. The spray of a liquid jet for steady and oscillating crossflow is characterized. The flow field at the injector location in the crossflow direction is determined using particle image velocimetry for the oscillating as well as steady crossflow case. Planar Mie scattering measurement is used to characterize the response of spray formed under oscillating crossflow, and supplementary phase-averaged phase Doppler particle analyzer (PDPA) measurements are used to understand the response behavior. The global response of spray to the oscillating crossflow is characterized using the planar Mie scattering imaging. It shows that few differences exist in the heights of the maximum-pixel intensity trajectory for the nonoscillating and oscillating crossflow conditions and the trajectory under oscillating crossflow is lower than that of steady crossflow, suggesting the oscillating crossflow affects the atomization (i.e. the oscillating crossflow enhances the atomization process, results in smaller droplets and penetrates less transversely). The response of spray to the oscillating crossflow characterized in terms of the spray transfer function (STF) shows that the gain of the STF increases linearly (at least monotonically) as the liquid−air momentum flux ratio increases but does not change as much with respect to the change of Weber number for a fixed liquid−air momentum flux ratio. This also indicates that the liquid jet atomization under oscillating crossflow is enhanced much more with the increase of liquid−air momentum flux ratio than with the increase of Weber number. The phase-averaged PDPA measurements confirm that the oscillating crossflow indeed enhances the atomization process in that the oscillating crossflow results in a relatively greater number of smaller droplets and mean droplet size.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Fluid Dynamics and Heat Transfer · Particle Dynamics in Fluid Flows · Combustion and flame dynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.