EXPERIMENTAL STUDY ON SPRAY AND MIXTURE PROPERTIES OF THE GROUP-HOLE NOZZLE FOR DIRECT-INJECTION DIESEL ENGINES, PART II: EFFECTS OF INCLUDED ANGLE AND INTERVAL BETWEEN ORIFICES
Source abstract
Abstract
The research reported in this article is an experimental investigation on the effects of nozzle specifications on spray and mixture properties of the group-hole nozzle by varying the included angle and interval between orifices. Since the group-hole nozzle spray loses its axisymmetry in the divergent angle and large interval cases, the original ultraviolet-visible laser absorption-scattering (LAS) imaging technique was first extended to simultaneous measurement of the total masses, as well as the mass distributions of vapor/liquid phases per projection area perpendicular to the laser beam in a nonaxisymmetric evaporating spray. Two major aspects of group-hole nozzle specifications have been investigated in this work. The results suggest that: (1) Increasing the divergent angle between orifices results in shorter spray tip penetration, larger spray cone angle, and significant increase in mass of fuel vapor, indicating the evaporation improvement. (2) In the case of group-hole nozzle with relatively large interval between orifices used in this study, the decreased penetration, larger spray cone angle, and reduced mass ratio of fuel vapor can be found. It is considered to be contributed to by the combined effect of direct droplets collision in the overlapping part of the two jets and the droplets collision and coalescence in the stagnation region inside the fuel spray.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Combustion and flame dynamics · Advanced Combustion Engine Technologies · Plant Surface Properties and Treatments
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.