journal article·2026

PREDICTION RESEARCH OF LIGAMENT FRAGMENTATION CRITICAL FLOW RATES AND DROPLET CHARACTERIZATION IN ROTARY CUP ATOMIZATION

Minmin Wu, Jia Cheng, Rui Ye, Ziyu Li, Mingxiong Ou, Shiqun Dai, Weidong Jia

Atomization and Sprays· Volume 36· Issue 4
Publisher page

Abstract

Rotary cup atomization is widely used in low-volume agricultural spraying. In this study, fragmentation visualization and droplet size measurement experiments were conducted to systematically investigate fragmentation behavior and droplet characteristics in rotary cup atomization. Particular attention was given to the ligament fragmentation (LF) regime, and dimensionless correlations were established to predict the upper and lower critical flow rates defining its stable operating window (R2 > 0.97). Within the LF regime, predictive models for the droplet volume median diameter (Dv0.5) were developed using the same dimensionless framework. In addition, droplet size distributions were described using the Rosin-Rammler distribution, enabling unified prediction of both characteristic droplet size and distribution. An engineering-oriented analytical framework was established that integrates fragmentation regime delimitation with droplet characterization, providing theoretical guidance for parameter optimization and stable operation under low-volume agricultural spraying conditions.
Source: openalex_inverted_index · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solidification and crystal growth phenomena · Fluid Dynamics and Heat Transfer · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Alidoost Dafsari, R., Yu, S., Choi, Y., and Lee, J., Effect of Geometrical Parameters of Air-Induction Nozzles on Droplet Characteristics and Behaviour, Biosyst. Eng., vol. 209, pp. 14-€“29, 2021.10.1016/j.biosystemseng.2021.06.013 ↗
2. Baio, F.H.R., de Oliveira, J.T., Alves, M.E.M., Teodoro, L.P.R., da Cunha, F.F., and Teodoro, P.E., Characterization of the Droplet Population Generated by Centrifugal Atomization Nozzles of UAV Sprayers, AgriEngineering, vol. 7, no. 15, 2025.10.3390/agriengineering7010015 ↗
3. Boize, L.M. and Dombrowski, N., The Atomization Characteristics of a Spinning Disc Ultra-Low Volume Applicator, J. Agric. Eng. Res., vol. 21, pp. 87-€“99, 1976.10.1016/0021-8634(76)90101-3 ↗
4. Chen, J., Hu, W., Dong, X., Lin, J., Gao, Z., and Qiu, B., Prediction of Droplet Size and Spreading Parameter by Rotary Cup Atomisation Using Dimensional Analysis, Biosyst. Eng., vol. 253, Article ID 104132, 2025. DOI: 10.1016/j.biosystemseng.2025.10413210.1016/j.biosystemseng.2025.104132 ↗
5. Choi, S.M., Yun, S., Jeong, H.J., and Corber, A., Spray in Cross Flow of a Rotary Atomizer, Atomization Sprays, vol. 22, no. 2, pp. 143-€“161, 2012.10.1615/AtomizSpr.2012005049 ↗
6. Feng, Y.-H., Zhang, Z., Gao, J., Feng, G.-P., Qiu, L., Feng, D.-L., Zhang, X.-X., and Zhu, X., Research Status of Centrifugal Granulation, Physical Heat Recovery and Resource Utilization of Blast Furnace Slags, J. Anal. Appl. Pyrol., vol. 157, Article ID 105220, 2021. DOI: 10.1016/j.jaap.2021.10522010.1016/j.jaap.2021.105220 ↗
7. Frost, A.R., Rotary Atomization in the Ligament Formation Mode, J. Agric. Eng. Res., vol. 26, no. 1, pp. 63-€“78, 1981.10.1016/0021-8634(81)90127-X ↗
8. Gödeke, L., Oswald, W., Willenbacher, N., and Ehrhard, P., Dimensional Analysis of Droplet Size and Ligament Length during High-Speed Rotary Bell Atomization, J. Coat. Technol. Res., vol. 18, pp. 75-€“81, 2021.10.1007/s11998-020-00389-2 ↗
9. Guler, H., Zhang, Z., Zhu, H., Grieshop, M., and Ledebuhr, M.A., Spray Characteristics of Rotary Micro Sprinkler Nozzles Used in Orchard Pesticide Delivery, Trans. ASABE, vol. 63, no. 6, pp. 1845-€“1853, 2020.10.13031/trans.13445 ↗
10. Igari, N., Iso, T., Nishio, Y., Izawa, S., and Fukunishi, Y., Numerical Simulation of Droplet-Formation in Rotary Atomizer, Theor. Appl. Mech. Lett., vol. 9, no. 3, pp. 202-€“205, 2019.10.1016/j.taml.2019.03.015 ↗
11. Johansen, O., Brandvik, P.J., and Farooq, U., Droplet Breakup in Subsea Oil Releases -€“ Part 2: Predictions of Droplet Size Distributions with and without Injection of Chemical Dispersants, Mar. Pollut. Bull., vol. 73, no. 1, pp. 327-€“335, 2013.10.1016/j.marpolbul.2013.04.012 ↗
12. Kuhnhenn, M., Joensen, T.V., Reck, M., Roisman, I.V., and Tropea, C., Study of the Internal Flow in a Rotary Atomizer and Its Influence on the Properties of the Resulting Spray, Int. J. Multiph. Flow, vol. 100, pp. 30-€“40, 2018.10.1016/j.ijmultiphaseflow.2017.11.019 ↗
13. Li, M., Zhao, J., Zhang, X., Xu, N., Meng, H., Wu, Z., and Wang, S., Effects of Granulator Structure and Cooperating Mode with Slag Tube on the Centrifugal Granulation Characteristics of Molten Slag, Appl. Therm. Eng., vol. 193, Article ID 117026, 2021. DOI: 10.1016/j.applthermaleng.2021.11702610.1016/j.applthermaleng.2021.117026 ↗
14. Li, Y., Sisoev, G.M., and Shikhmurzaev, Y.D., Spinning Disk Atomization: Theory of the Ligament Regime, Phys. Fluids, vol. 30, no. 9, Article ID 093601, 2018. DOI: 10.1063/1.504442910.1063/1.5044429 ↗
15. Liu, J., Yu, Q., and Guo, Q., Experimental Investigation of Liquid Disintegration by Rotary Cups, Chem. Eng. Sci., vol. 73, pp. 44-€“50, 2012.10.1016/j.ces.2012.01.010 ↗
16. Mantripragada, V.T. and Sarkar, S., Prediction of Drop Size from Liquid Film Thickness during Rotary Disc Atomization Process, Chem. Eng. Sci., vol. 158, pp. 227-€“233, 2017.10.1016/j.ces.2016.10.027 ↗
17. Ogasawara, S., Daikoku, M., Shirota, M., Inamura, T., Saito, Y., Yasumura, K., Shoji, M., Aoki, H., and Miura, T., Liquid Atomization Using a Rotary Bell Cup Atomizer (Influence of Flow Characteristics of Liquid on Breakup Pattern), J. Fluid Sci. Technol., vol. 5, no. 3, pp. 464-€“474, 2010.10.1299/jfst.5.464 ↗
18. Ou, M., Dai, S., Jing, X., Jia, W., Dong, X., Wang, Y., and Wu, M., Study on Spray Deposition Effect of a New High-Clearance Air-Assisted Electrostatic Sprayer, Agriculture, vol. 15, no. 13, Article ID 1331, 2025. DOI: 10.3390/agriculture1513133110.3390/agriculture15131331 ↗
19. Ou, M., Zhang, Y., Zhang, T., Wu, M., Jia, W., Dai, S., and Dong, X., Development and Experiment of an Air-Assisted Electrostatic Nozzle and Sprayer for Vineyard Pesticide Application, Crop Prot., vol. 200, Article ID 107455, 2026. DOI: 10.1016/j.cropro.2025.10745510.1016/j.cropro.2025.107455 ↗
20. Peng, H., Wang, N., Wang, D., and Ling, X., Experimental Study on the Critical Characteristics of Liquid Atomization by a Spinning Disk, Ind. Eng. Chem. Res., vol. 55, no. 21, pp. 6175-€“6185, 2016.10.1021/acs.iecr.6b00401 ↗
21. Prather, C.A., Craig, C.D., Baumann, J.M., and Morgen, M.M., Experimental and Theoretical Investigation of Rotary Atomization Dynamics for Control of Microparticle Size during Spray Congealing Process, Powder Technol., vol. 418, no 1, Article ID 118278, 2023. DOI:10.1016/j.powtec.2023.11827810.1016/j.powtec.2023.118278 ↗
22. Ru, Y., Fang, S., Xue, J., Hu, C., and Zhou, J., Experimental Study of the Influence Factors of the Droplet Size of Rotary Nozzles during Manned Helicopter Spraying Operations, Crop Prot., vol. 177, Article ID 106550, 2024. DOI: 10.1016/j.cropro.2023.10655010.1016/j.cropro.2023.106550 ↗
23. Seo, Y., Ryu, G., and Lee, J., Effects of Design Variables on the Liquid Breakup and the Atomization Characteristics of Rotary Atomizers for Small Gas Turbine Combustors, Int. J. Heat Mass Transf., vol. 239, Article ID 126607, 2025. DOI: 10.1016/j.ijheatmasstransfer.2024.12660710.1016/j.ijheatmasstransfer.2024.126607 ↗
24. Shim, H.-S., Kim, S., Kim, J., Kim, D., Ryu, G., and Lee, J., Experimental Investigation on Liquid Breakup and Injection Characteristics of a Rotary Slinger Atomizer, Int. J. Aeronaut. Space Sci., vol. 24, pp. 1522-€“1532, 2023.10.1007/s42405-023-00612-5 ↗
25. Tan, Y., Chen, X., Jia, M., He, W., Qin, Y., Ding, B., and Wu, J., Evaluating Rotating Disk vs. Cup Atomizers: Atomization Performance in Film Fragmentation Mode, Chem. Eng. Sci., vol. 306, no. 7, Article ID 121251, 2025. DOI: 10.1016/j.ces.2025.12125110.1016/j.ces.2025.121251 ↗
26. Tan, Y., Zhu, X., Wang, H., He, X.-Y., Ding, B., and Liao, Q., Centrifugal Granulation Characteristics of Molten Blast Furnace Slag and Performance of the Granulated Particles, Appl. Therm. Eng., vol. 142, pp. 683-€“694, 2018.10.1016/j.applthermaleng.2018.07.023 ↗
27. Wang, D., Ling, X., Peng, H., Cui, Z., and Yang, X., Experimental Investigation of Ligament Formation Dynamics of Thin Viscous Liquid Film at Spinning Disk Edge, Ind. Eng. Chem. Res., vol. 55, no. 34, pp. 9267-€“9275, 2016.10.1021/acs.iecr.6b01428 ↗
28. Wang, J., Pan, Y., Zhao, M., Ma, P., Lv, S., and Huang, Y., Computational Fluid Dynamics Numerical Simulation on Flow Behavior of Molten Slag-€“Metal Mixture over a Spinning Cup, Processes, vol. 12, no. 2, Article ID 372, 2024.10.3390/pr12020372 ↗
29. Wang, T., Si, Y., Li, N., Dong, Z., and Jiang, L., Bioinspired Tip-Guidance Liquid Jetting and Droplet Emission at a Rotary Disk via a Surface Energy Gradient, ACS Nano, vol. 13, no. 11, pp. 13100-€“13108, 2019.10.1021/acsnano.9b05860 ↗
30. Wu, M., Dai, S., Ye, R., Ou, M., Wang, G., Hu, C., Fan, X., and Jia, W., Experimental Study of Liquid Jet Atomization and Penetration in Subsonic Crossflows, Agriculture, vol. 15, no. 10, Article ID 1037, 2025. DOI: 10.3390/agriculture1510103710.3390/agriculture15101037 ↗
31. Yang, J., Li, L., Tang, Q., Hu, P., Yan, W., and Zhang, R., Modeling the Droplet Size Distribution of Atomizers with Different Cage Diameters for Large-Payload Unmanned Aerial Vehicles (UAVs), Agronomy, vol. 15, Article ID 647, 2025. DOI: 10.3390/agronomy1503064710.3390/agronomy15030647 ↗
32. Zhao, A., Pan, Y., Zhao, M., Zhang, S., Ma, P., and Feng, X., CFD Numerical Simulation on the Mode of Ligament Disintegration during Centrifugal Granulation of Molten Slag by Using a Spinning Cup, Minerals, vol. 13, no. 3, Article ID 316, 2023. DOI: 10.3390/min1303031610.3390/min13030316 ↗