journal article·2026

REFINING FLASH BOILING SPRAY STAGE CLASSIFICATION THROUGH IMPROVED UNDERSTANDING OF IN-NOZZLE BUBBLE NUCLEATION

Yijia Zhang, Yilong Li, Shangning Wang, Xuesong Li, David L. S. Hung, Min Xu

Atomization and Sprays· Volume 36· Issue 2
Publisher page

Abstract

Flash boiling sprays are governed by different atomization mechanisms at different stages, leading to distinct spray characteristics. Therefore, a clear stage classification is essential for understanding their atomization process and for controlling spray behavior. Based on direct observations of in-nozzle bubble dynamics and external spray features, this study proposes a refined three-stage classification of superheated sprays: in addition to the well-recognized transitional flash boiling and flare flash boiling stages, an unboiled superheated stage is identified. The study suggests that the transitions between these stages are intrinsically linked to bubble nucleation and growth mechanisms inside the nozzle. The presence of the unboiled superheated stage is explained through classical nucleation theory. Furthermore, by incorporating a heterogeneous nucleation correction, a combined experimental-theoretical method is proposed to predict the onset of in-nozzle nucleation, which marks the transition from the unboiled superheated stage to transitional flash boiling. Sensitivity analysis identifies the main factors influencing nucleation onset and highlights potential strategies for actively controlling nucleation onset and spray stage transitions.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Fluid Dynamics and Heat Transfer · Heat Transfer and Boiling Studies · Rocket and propulsion systems research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Alamgir, Md. and Lienhard, J.H., Correlation of Pressure Undershoot during Hot-Water Depressurization, J. Heat Transf., vol. 103, no. 1, pp. 52-55, 1981. DOI: 10.1115/1.324442910.1115/1.3244429 ↗
2. Bar-Kohany, T. and Levy, M., State of the Art Review of Flash-Boiling Atomization, Atomiz. Sprays, vol. 26, no. 12, pp. 1259-1305, 2016. DOI: 10.1615/AtomizSpr.201601562610.1615/AtomizSpr.2016015626 ↗
3. Cleary, V., Bowen, P., and Witlox, H., Flashing Liquid Jets and Two-Phase Droplet Dispersion, J. Hazard. Mater., vol. 142, no. 3, pp. 786-796, 2007. DOI: 10.1016/j.jhazmat.2006.06.12510.1016/j.jhazmat.2006.06.125 ↗
4. Ermakov, G.V., Lipnyagov, E.V., and Perminov, S.A., Classical Theory of Homogeneous Nucleation in Superheated Liquids and Its Experimental Verification, Thermophys. Aeromechanics, vol. 19, no. 4, pp. 667-678, 2012. DOI: 10.1134/S086986431204015410.1134/S0869864312040154 ↗
5. Fajgenbaum, R. and dos Santos, R.G., Influence of Fuel Temperature on Atomization Parameters in a Pressure-Swirl Atomizer from a Port Fuel Injector by Shadowgraphy Technique, J. Braz. Soc. Mech. Sci. Eng., vol. 38, no. 7, pp. 1877-1892, 2016. DOI: 10.1007/s40430-015-0443-010.1007/s40430-015-0443-0 ↗
6. Frenkel, J., A General Theory of Heterophase Fluctuations and Pretransition Phenomena, J. Chem. Phys., vol. 7, no. 7, pp. 538-547, 1939. DOI: 10.1063/1.175048410.1063/1.1750484 ↗
7. Gaur, A., Ailaboina, A., and Saha, K., Microscopic and Macroscopic Analysis of the Flashing and Non-Flashing Ethanol Blended Fuel for the Direct Injection Sprays, Appl. Therm. Eng., vol. 260, Article 124924, 2025. DOI: 10.1016/j.applthermaleng.2024.12492410.1016/j.applthermaleng.2024.124924 ↗
8. Kalikmanov, V.I., Nucleation Theory, Dordrecht, Netherlands: Springer Dordrecht, pp. 1-316, 2013. DOI: 10.1007/978-90-481-3643-810.1007/978-90-481-3643-8 ↗
9. Kitamura, Y., Morimitsu, H., and Takahashi, T., Critical Superheat for Flashing of Superheated Liquid Jets, Ind. Eng. Chem. Fundam., vol. 25, no. 2, pp. 206-211, 1986. DOI: 10.1021/i100022a00510.1021/i100022a005 ↗
10. Koledin, V.V. and Shagapov, V.Sh., The Dynamics of the Growth of Vapour Bubbles in a Superheated Liquid, J. Appl. Math. Mech., vol. 77, no. 5, pp. 541-550, 2013. DOI: 10.1016/j.jappmathmech.2013.12.00910.1016/j.jappmathmech.2013.12.009 ↗
11. Krämer, M., Kull, E., and Wensing, M., Flashboiling-Induced Targeting Changes in Gasoline Direct Injection Sprays, Int. J. Engine Res., vol. 17, no. 1, pp. 97-107, 2016. DOI: 10.1177/146808741560476310.1177/1468087415604763 ↗
12. Kumar, A. and Van Dam, N., Internal Nozzle Simulations of Flash Boiling Liquid Ammonia Sprays for Engine Applications, Atomiz. Sprays, vol. 35, no. 5, pp. 27-55, 2025. DOI: 10.1615/AtomizSpr. 202505574210.1615/AtomizSpr.2025055742 ↗
13. Lamanna, G., Cryogenic Flashing Jets: A Review, Proc. 52nd AIAA/SAE/ASEE Joint Propulsion Conf., Salt Lake City, UT, 2016. DOI: 10.2514/6.2016-478710.2514/6.2016-4787 ↗
14. Lamanna, G., Kamoun, H., Weigand, B., and Steelant, J., Towards a Unified Treatment of Fully Flashing Sprays, Int. J. Multiph. Flow, vol. 58, pp. 168-184, 2014. DOI: 10.1016/j.ijmultiphaseflow.2013.08.01010.1016/j.ijmultiphaseflow.2013.08.010 ↗
15. Li, C., He, Z., Yang, Y., Chen, J., and Zhong, W., Experimental Study on Flash Boiling Spray of High-Pressure Liquid Ammonia Jet with Round and Elliptical Hole Nozzles, Atomiz. Sprays, vol. 34, no. 5, pp. 39-56, 2024a. DOI: 10.1615/AtomizSpr.202405035810.1615/AtomizSpr.2024050358 ↗
16. Li, S., Li, T., Wang, N., Zhou, X., Chen, R., and Yi, P., An Investigation on Near-Field and Far-Field Characteristics of Superheated Ammonia Spray, Fuel, vol. 324, Article 124683, 2022. DOI: 10.1016/j.fuel.2022.12468310.1016/j.fuel.2022.124683 ↗
17. Li, X., Wang, S., Yang, S., Qiu, S., Sun, Z., Hung, D.L.S., and Xu, M., A Review on the Recent Advances of Flash Boiling Atomization and Combustion Applications, Prog. Energy Combust. Sci., vol. 100, Article 101119, 2024b. DOI: 10.1016/j.pecs.2023.10111910.1016/j.pecs.2023.101119 ↗
18. Li, Y., Guo, H., Zhou, Z., Zhang, Z., Ma, X., and Chen, L., Spray Morphology Transformation of Propane, N-Hexane and Iso-Octane under Flash-Boiling Conditions, Fuel, vol. 236, pp. 677-685, 2019. DOI:10.1016/j.fuel.2018.08.16010.1016/j.fuel.2018.08.160 ↗
19. Liao, Y. and Lucas, D., Computational Modelling of Flash Boiling Flows: A Literature Survey, Int. J. Heat Mass Transf., vol. 111, pp. 246-265, 2017. DOI: 10.1016/j.ijheatmasstransfer.2017.03.12110.1016/j.ijheatmasstransfer.2017.03.121 ↗
20. NIST Chemistry WebBook, NIST Standard Reference Database 69, accessed September 18, 2025, from https://webbook.nist.gov/chemistry/, 2025. DOI: 10.18434/T4D303
21. Qiu, S., Wang, S., Zhang, Y., Li, X., Hung, D.L.S., and Xu, M., Dense-Field Spray Droplet Size Quantification of Flashing Boiling Atomization Using Structured Laser Illumination Planar Imaging Technique, Fuel, vol. 335, Article 127085, 2023. DOI: 10.1016/j.fuel.2022.12708510.1016/j.fuel.2022.127085 ↗
22. Rousselle, C., Liquid Ammonia Spray: One Solution for Efficient and Clean Thermal Applications?, ILASS Europe 2025, Lund, Sweden, 2025.
23. Schulz, F. and Beyrau, F., The Influence of Flash-Boiling on Spray-Targeting and Fuel Film Formation, Fuel, vol. 208, pp. 587-594, 2017. DOI: 10.1016/j.fuel.2017.07.04710.1016/j.fuel.2017.07.047 ↗
24. Su, M., Ding, J., Liu, K., Xu, C., and Zhou, W., Effect of Flash-Boiling and Air-Assisted Injection on Methanol Spray Characteristics, Atomiz. Sprays, vol. 34, no. 10, pp. 57-77, 2024. DOI: 10.1615/AtomizSpr.202404984510.1615/AtomizSpr.2024049845 ↗
25. Wang, S., Li, Y., Zhang, Y., Qiu, S., Cai, L., Li, X., and Xu, M., Quantitative Analysis on Surface Roughness Effects on Flash Boiling Internal Flow and External Breakup, Energy, vol. 340, Article ID 139152, 2025a. DOI: 10.1016/j.energy.2025.13915210.1016/j.energy.2025.139152 ↗
26. Wang, S., Li, Y., Zhang, Y., Qiu, S., and Li, X., Impacts of Flash Boiling Plume Interactions on Atomization Evaluated Using Two-Dimensional Optical Slit Nozzles, Appl. Therm. Eng., vol. 248, Article ID 123314, 2024a. DOI: 10.1016/j.applthermaleng.2024.12331410.1016/j.applthermaleng.2024.123314 ↗
27. Wang, S., Qiu, S., Zhang, Y., Cui, M., Li, X., and Xu, M., In-Nozzle Multi-Phase Flow Patterns in Flash Boiling Atomization and their Impacts on External Sprays, Exp. Fluids, vol. 64, no. 3, Article ID 48, 2023. DOI: 10.1007/s00348-023-03600-310.1007/s00348-023-03600-3 ↗
28. Wang, S., Xiao, D., Qiu, S., Zhang, X., Li, X., Hung, D.L.S., and Xu, M., The Effects of Nozzle Taper Angle on In-Nozzle Flow and Nozzle Tip-Wetting under Flash Boiling Conditions, Fuel, vol. 329, Article ID 125348, 2022. DOI: 10.1016/j.fuel.2022.12534810.1016/j.fuel.2022.125348 ↗
29. Wang, S., Yao, B., Qiu, S., Zhang, Y., Li, X., and Xu, M., Investigation on Flash Boiling Phase Change Characteristics of Two-Dimensional Slit Nozzles Using Backlit Light Attenuation with Multi-Component Fuels, Fuel, vol. 357, Article ID 129835, 2024b. DOI: 10.1016/j.fuel.2023.12983510.1016/j.fuel.2023.129835 ↗
30. Wang, S., Zhang, Y., Qiu, S., Hung, D.L.S., Li, X., and Xu, M., Investigation on Cavitation Enhancement on Flash Boiling Atomization Using Two-Dimensional Slit Nozzles, Energy, vol. 293, Article ID 130720, 2024c. DOI: 10.1016/j.energy.2024.13072010.1016/j.energy.2024.130720 ↗
31. Wang, Z., Li, M., Yu, W., Hu, Z., and Li, L., Spray Macro-Characteristics of Methanol-Ammonia Blend with Short Injection Durations, Atomiz. Sprays, vol. 35, no. 8, pp. 47-62, 2025b. DOI: 10.1615/AtomizSpr.202505860910.1615/AtomizSpr.2025058609 ↗
32. Wu, S., Xu, M., Hung, D.L.S., and Pan, H., Effects of Nozzle Configuration on Internal Flow and Primary Jet Breakup of Flash Boiling Fuel Sprays, Int. J. Heat Mass Transf., vol. 110, pp. 730-738, 2017. DOI: 10.1016/j.ijheatmasstransfer.2017.03.07310.1016/j.ijheatmasstransfer.2017.03.073 ↗
33. Xu, M., Zhang, Y., Zeng, W., Zhang, G., and Zhang, M., Flash Boiling: Easy and Better Way to Generate Ideal Sprays than the High Injection Pressure, SAE Int. J. Fuels Lubr., vol. 6, no. 1, pp. 137-148, 2013.DOI: 10.4271/2013-01-161410.4271/2013-01-1614 ↗
34. Yang, S., Li, X., Hung, D.L.S., and Xu, M., Characteristics and Correlation of Nozzle Internal Flow and Jet Breakup under Flash Boiling Conditions, Int. J. Heat Mass Transf., vol. 127, pp. 959-969, 2018. DOI: 10.1016/j.ijheatmasstransfer.2018.07.10910.1016/j.ijheatmasstransfer.2018.07.109 ↗
35. Yang, S., Ma, Z., Li, X., Hung, D.L.S., and Xu, M., A Review on the Experimental Non-Intrusive Investigation of Fuel Injector Phase Changing Flow, Fuel, vol. 259, Article ID 116188, 2020. DOI: 10.1016/j.fuel.2019.11618810.1016/j.fuel.2019.116188 ↗
36. Yang, S., Wang, S., Sun, Z., Li, X., Hung, D.L.S., and Xu, M., In-Nozzle Bubble Formation and Its Effect on Fuel Jet Breakup under Cavitating and Flash Boiling Conditions, Appl. Therm. Eng., vol. 183, Article ID 116120, 2021. DOI: 10.1016/j.applthermaleng.2020.11612010.1016/j.applthermaleng.2020.116120 ↗
37. Yin, P., Yang, S., Li, X., and Xu, M., Numerical Simulation of In-Nozzle Flow Characteristics under Flash Boiling Conditions, Int. J. Multiphase Flow, vol. 127, Article ID 103275, 2020. DOI: 10.1016/j.ijmultiphaseflow.2020.10327510.1016/j.ijmultiphaseflow.2020.103275 ↗
38. Zeng, W., Xu, M., Zhang, G., Zhang, Y., and Cleary, D.J., Atomization and Vaporization for Flash-Boiling Multi-Hole Sprays with Alcohol Fuels, Fuel, vol. 95, pp. 287-297, 2012. DOI: 10.1016/j.fuel.2011.08.04810.1016/j.fuel.2011.08.048 ↗
39. Zhong, W., Chen, J., Li, C., Huang, Y., Pachiannan, T., Jiang, Z., Yuan, Y., and He, Z., Visualization Study on Flash Boiling Spray Characteristics of High-Pressure Liquid Ammonia with Different Nozzle Diameters, Fuel, vol. 367, Article ID 131525, 2024. DOI: 10.1016/j.fuel.2024.13152510.1016/j.fuel.2024.131525 ↗