ATOMIZER DESIGN ON PNEUMATIC ATOMIZATION IN THE HIGH OHNESORGE NUMBER REGIME
Source abstract
Abstract
Atomization of high-viscosity liquids at high Ohnesorge number remains a major challenge in industrial applications. This study pioneers an investigation into atomization performance within a high Ohnesorge number regime, extending beyond the range reported in the published literature. High-viscosity polydimethylsiloxane was atomized by ambient temperatured air. Proposing a modular external-mixing twin-fluid atomizer, we investigate the influence of process conditions and geometric parameters of the atomizer on atomization performance. The impingement distance between the out-flowing liquid and gas jets was varied. Several configurations were tested, differing in the geometric design of the gas nozzles and the liquid feed tube. Shadow photography and droplet size analysis were conducted to determine atomization quality. Across the investigated atomizers, a Sauter mean diameter d32 of 510 × 10-6 m was obtained, at an air-liquid volumetric flow rate ratio (ALR) of 9100 and a feed viscosity of 16.9 Pas. This study demonstrates that atomization of high-viscosity fluids with high Ohnesorge numbers is achievable, providing crucial insights for numerous potential industrial applications.
Source: openalex_inverted_index · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fluid Dynamics and Heat Transfer · Fluid Dynamics and Mixing · Erosion and Abrasive Machining
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Ashgriz, N., Handbook of Atomization and Sprays: Theory and Applications, New York: Springer US, 2011.10.1007/978-1-4419-7264-4 ↗
2. Ballesteros Martinez, M. A., Roy, P., Solano Alarcon, J.N., and Gaukel, V., Atomizing High-Viscosity Non-Newtonian Fluids with the ACLR Nozzle: Correlation between Internal Flow and External Spray Instabilities, J. Non-Newtonian Fluid Mech., vol. 338, p. 105405, 2025.10.1016/j.jnnfm.2025.105405 ↗
3. Beckers, D., Ellendt, N., Fritsching,U., and Uhlenwinkel,V., Impact of Process FlowConditions on Particle Morphology in Metal Powder Production via Gas Atomization, Adv. Powder Technol., vol. 31, no. 1, pp. 300-311, 2020.10.1016/j.apt.2019.10.022 ↗
4. Cheng, T., Leibovici, R., Kong, B., and van Hout, R., Experimental Investigation of Primary Breakup in Close-Coupled Gas Atomization, Int. J. Multiphase Flow, vol. 181, p. 105009, 2024.10.1016/j.ijmultiphaseflow.2024.105009 ↗
5. Diamantopoulos, M. and Hochenauer, C., Optimised Twin Fluid Atomiser Design for High-Viscosity, Shear-Thinning Fluids, Appl. Sci., vol. 15, no. 14, p. 7992, 2025.10.3390/app15147992 ↗
6. Dumouchel, C., On the Experimental Investigation on Primary Atomization of Liquid Streams, Exp. Fluids, vol. 45, no. 3, pp. 371-422, 2008.10.1007/s00348-008-0526-0 ↗
7. Erinin,M.A., Neel, B., Mazzatenta,M.T., Duncan, J.H., and Deike, L., Comparison between Shadow Imaging and In-Line Holography for Measuring Droplet Size Distributions, Exp. Fluids, vol. 64, article no. 96, 2023.10.1007/s00348-023-03633-8 ↗
8. Ghahremani, A.R., Saidi, M.H., Hajinezhad, A., and Mozafari, A.A., Experimental Investigation of Spray Characteristics of a Modified Bio-Diesel in a Direct Injection Combustion Chamber, Exp. Therm. Fluid Sci., vol. 81, pp. 445-453, 2017.10.1016/j.expthermflusci.2016.09.010 ↗
9. Ghezelchi, M.H., Garcia-Perez, M., and Wu, H., Bioslurry as a Fuel. 7: Spray Characteristics of Bio-Oil and Bioslurry via Impact and Twin-Fluid Atomizers, Energ. Fuel, vol. 29, no. 12, pp. 8058-8065, 2015.10.1021/acs.energyfuels.5b02089 ↗
10. Gvozdyakov, D. and Zenkov, A., Nozzles for Spraying Coal-Water Fuels, Appl. Sci., vol. 13, no. 21, p. 12006, 2023.10.3390/app132112006 ↗
11. Gvozdyakov, D., Zenkov, A., Lavrinenko, S., Marysheva, Y., and Larionov, K., Spraying Characteristics of Alcohol-Coal-Water Slurries with Low Coal Content, Chem. Eng. Technol., vol. 45, no. 5, pp. 936-945, 2022.10.1002/ceat.202200020 ↗
12. Hecht, E., Optics, 5th ed., Harlow: Pearson Education Limited, pp. 492-493, 2017.
13. Hede, P.D., Bach, P., and Jensen, A.D., Two-Fluid Spray Atomisation and Pneumatic Nozzles for Fluid Bed Coating/Agglomeration Purposes: A Review, Chem. Eng. Sci., vol. 63, no. 14, pp. 3821-3842, 2008.10.1016/j.ces.2008.04.014 ↗
14. Kim, J.Y., Lee, S.J., Baik, G.Y., and Hong, J.G., Viscosity Effect on the Electrospray Characteristics of Droplet Size and Distribution, ACS Omega, vol. 6, no. 44, pp. 29724-29734, 2021.10.1021/acsomega.1c04119 ↗
15. Kuznetsov, G.V., Strizhak, P.A., Valiullin, T.R., and Volkov, R.S., Atomization Behavior of Composite Liquid Fuels Based on Typical Coal Processing Wastes, Fuel Process. Technol., vol. 225, p. 107037, 2022.10.1016/j.fuproc.2021.107037 ↗
16. Lefebvre, A.H. and McDonell, V.G., Atomization and Sprays, Boca Raton: CRC Press, 2017.10.1201/9781315120911 ↗
17. Li, Z., Wu, Y., Yang, H., Cai, C., Zhang, H., Hashiguchi, K., Takeno, K., and Lu, J., Effect of Liquid Viscosity on Atomization in an Internal-Mixing Twin-Fluid Atomizer, Fuel, vol. 103, pp. 486-494, 2013.10.1016/j.fuel.2012.06.097 ↗
18. Li, X., Gao, H., and Soteriou, M.C., Investigation of the Impact of High LiquidViscosity on Jet Atomization in Crossflow via High-Fidelity Simulations, Phys. Fluids, vol. 29, no. 8, p. 101303, 2017.10.1063/1.4996178 ↗
19. Loureiro, L., Gil, P., Vieira de Campos, F.V., Nunes, L., and Ferreira, J., Dispersion and Flow Properties of Charcoal Oil Slurries (ChOS) as Potential Renewable Industrial Liquid Fuels, J. Energy Inst., vol. 91, no. 6, pp. 978-983, 2018.10.1016/j.joei.2017.08.001 ↗
20. Lu, P. and Zhang, M., Experimental Investigation on Atomizing Characteristics of Coal-Water Paste for Pressurized Fluidized Bed, Fuel, vol. 83, no. 16, pp. 2109-2114, 2004.10.1016/j.fuel.2004.06.003 ↗
21. Mandal, S., Sadeghianjahromi, A., andWang, C.C., Experimental and Numerical Investigations on Molten Metal Atomization Techniques â A Critical Review, Adv. Powder Technol., vol. 33, no. 11, p. 103809, 2022.10.1016/j.apt.2022.103809 ↗
22. Mlkvik, M., Jedelsky, J., Karbstein, H.P., and Gaukel, V., Spraying of Viscous Liquids: Influence of Fluid-Mixing Mechanism on the Performance of Internal-Mixing Twin-Fluid Atomizers, Appl. Sci., vol. 10, no. 15, p. 5249, 2020.10.3390/app10155249 ↗
23. Motaman, S., Mullis, A.M., Cochrane, R.F., and Borman, D.J., Numerical and Experimental Investigations of the Effect of Melt DeliveryNozzle Design on the Open- to Closed-Wake Transition in Closed-Coupled Gas Atomization, Metall. Mater. Trans. B, vol. 46, no. 4, pp. 1990-2004, 2015.10.1007/s11663-015-0346-6 ↗
24. Privitera, S., Cerruto, E., Manetto, G., Lupica, S., Nuyttens, D., Dekeyser, D., Zwertvaegher, I., Furtado Junior, M.R., and Vargas, B.C., Comparison between Liquid Immersion, Laser Diffraction, PDPA, and Shadowgraphy in Assessing Droplet Size from Agricultural Nozzles, Agriculture, vol. 14, no. 7, p. 1191, 2024.10.3390/agriculture14071191 ↗
25. Priyadarshi, A., Bin Shahrani, S., Choma, T., Zrodowski, L., Qin, L., Leung, C.L.A., Clark, S.J., Fezzaa, K., Mi, J., Lee, P.D., Eskin,D., and Tzanakis, I., New Insights into theMechanismof Ultrasonic Atomization for the Production ofMetal Powders in AdditiveManufacturing, Addit.Manuf., vol. 83, p. 104033, 2024.10.1016/j.addma.2024.104033 ↗
26. Qing, Y., Guo, K., Liu, C., Qin, Y., Zhan, Y., Shuo, S., Wei, Y., Yu, B., and Liu, C., Impact of Atomization Pressure on the Particle Size of Nickel-Based Superalloy Powders by Numerical Simulation, Materials, vol. 15, no. 9, 2022.10.3390/ma15093020 ↗
27. Radhakrishna, V., Characterization of Secondary Atomization at High Ohnesorge Numbers, Master's, Faculty of Purdue University, 2018.
28. Rangarajan, R., Zhang, H., Strykowski, P,J., Hoxie, A., Yang, S., and Srinivasan, V., Atomization of High Viscosity Liquids Using a Two-Fluid Counterflow Nozzle: Experiments and Modeling, Volume 4B: Combustion, Fuels, and Emissions, American Society of Mechanical Engineers, 2020.10.1115/GT2020-15691 ↗
29. Reineccius, G.A., The Spray Drying of Food Flavors, Dry Technol., vol. 22, no. 6, pp. 1289-1324, 2007.10.1081/DRT-120038731 ↗
30. Rist, D., Dynamik Realer Gase: Grundlagen, Berechnungen und Daten fur Thermogasdynamik, Stromungsmechanik und Gastechnik, Berlin: Springer, 1996.10.1007/978-3-642-61402-6 ↗
31. Sanger, A.D., Zerstaubung Hochviskoser Fluide bei Variierendem Systemdruck - Grundlagenforschung zur Hochdruck-Flugstromvergasung, PhD, Karlsruher Institut fur Technologie, 2018.
32. Schmid, K., Spray Drying of Protein Precipitates and Evaluation of the Nano Spray Dryer B-90, PhD, Ludwig-Maximilians-Universitat Munchen, 2011.
33. Shadrin, E., Anufriev, I.S., Butakov, E.B., Kopyev, E.P., Alekseenko, S.V., Maltsev, L.I., and Sharypov, O.V., Coal-Water Slurry Atomization in a New Pneumatic Nozzle and Combustion in a Low-Power Industrial Burner, Fuel, vol. 303, p. 121182, 2021.10.1016/j.fuel.2021.121182 ↗
34. ShinEtsu, accessed November 12, 2025, from www.shinetsusilicone-global.com/catalog/pdf/kf96 e.pdf, 2014.
35. Stahle, P., Schuchmann, H.P., and Gaukel, V., Performance and Efficiency of Pressure-Swirl and Twin-Fluid Nozzles Spraying Food Liquids with Varying Viscosity, J. Food Process. Eng., vol. 40, no. 1, p. e12317, 2017.10.1111/jfpe.12317 ↗
36. Taboada, M.L., Zapata, E., Karbstein, H.P., and Gaukel, V., Investigation of Oil Droplet Breakup during Atomization of Emulsions: Comparison of Pressure Swirl and Twin-Fluid Atomizers, Fluids, vol. 6, no. 6, p. 219, 2021.10.3390/fluids6060219 ↗
37. Taburchinov, R.I., Belonogov, M.V., and Egorov, R.I., Effect of the Addition of Petrochemicals onto the Atomization and Ignition of the Coal-Water Slurry Prepared from the Wastes, Appl. Sci., vol. 10, no. 23, p. 8574, 2020.10.3390/app10238574 ↗
38. Vadillo, A., Air Atomization of Metallurgical Slags for Production of a Slag By-Product, Master's, 2019.
39. Wacker Siliconole, accessed November 12, 2025, from www.hellermanntyton.at/binaries/content/assets/downloads/at/datenblatter/01-wacker-silikone/siliconefluidsakde.pdf, 2001.10.1055/a-2476-9342 ↗
40. Wang, N., Peng, H., Ling, X., Kang, J., and Xu, M., Experimental Investigation of Slag Particles of Ligament Mode Disintegration in Spinning Disk Atomizing, Energy Procedia, vol. 105, pp. 622-627, 2017.10.1016/j.egypro.2017.03.365 ↗
41. Wang, Y., Yu, L., Yuan, H., Ying, D., and Zhu, N., Improved Removal of Phosphorus from Incinerated Sewage Sludge Ash by Thermo-Chemical Reduction Method with CaCl2 Application, J. Clean. Prod., vol. 258, p. 120779, 2020.10.1016/j.jclepro.2020.120779 ↗
42. Welch, C., Khawar, M., Bohm, B., Gryczke, A., and Ries, F., Experimental Investigation of Spray Drying Breakup Regimes of a PVP-VA 64 Solution Using High-Speed Imaging, Pharmaceutics, vol. 16, no. 12, p. 1547, 2024.10.3390/pharmaceutics16121547 ↗
43. Wittner, M.O., Karbstein, H.P., and Gaukel, V., Spray Performance and Steadiness of an Effervescent Atomizer and an Air-Core-Liquid-Ring Atomizer for Application in Spray Drying Processes of Highly Concentrated Feeds, CEP:PI, vol. 128, pp. 96-102, 2018.10.1016/j.cep.2018.04.017 ↗
44. Wittner, M.O., Karbstein, H.P., and Gaukel, V., Energy Efficient Spray Drying by Increased Feed Dry Matter Content: Investigations on the Applicability of Air-Core-Liquid-RingAtomization on Pilot Scale, Dry Technol., vol. 38, no. 10, pp. 1323-1331, 2020.10.1080/07373937.2019.1635616 ↗
45. Wu, X., Guo, Q., Gong, Y., Liu, J., Luo, X., Wu, T., and Yu, G., Influence of Burner Geometry on Atomization of Coal Water Slurry in an Entrained-Flow Gasifier, Chem. Eng. Sci., vol. 247, p. 117088, 2022.10.1016/j.ces.2021.117088 ↗
46. Yule, A.J. and Dunkley, J.J., Atomization of Melts: For Powder Production and Spray Deposition, 1st ed., New York: Oxford University Press Inc., 1994.
47. Xu, H., Wang, C., and Wang, K., Full-Scale Plant Study of the Innovative Spray-Drying-Based Sludge Incineration (SDSI) Process: Behavior of Heavy Metals, Energ. Fuel, vol. 29, no. 6, pp. 3908-3912, 2015.10.1021/acs.energyfuels.5b00212 ↗
48. Zheng, J., Xu, Y., Wang, Q., and He, H., Characteristics of Particle Size and Velocity of Droplets of Coal Water Slurry Subjected to Air-Blast Electrostatic Atomization Using a Phase Doppler Particle Analyzer, J. Electrostatics, vol. 98, pp. 40-48, 2019.10.1016/j.elstat.2019.02.004 ↗
49. Zhou, M., Pan, B., Yang, D., Lou, H., and Qiu, X., Rheological Behavior Investigation of Concentrated Coal-Water Suspension, J. Dispersion Sci. Technol., vol. 31, no. 6, pp. 838-843, 2010.10.1080/01932690903333788 ↗