SPRAY MACRO-CHARACTERISTICS OF METHANOL-AMMONIA BLEND WITH SHORT INJECTION DURATIONS
Source abstract
Abstract
This study investigates the spray macro-characteristics of methanol-ammonia blend using a six-hole gasoline direct injector (GDI) coupled with Schlieren visualization. Experiments were conducted in a constant volume vessel (CVV) to characterize the spray behavior of a methanol-ammonia blend containing 9.5% methanol under high injection pressure and short injection durations. Experimental analysis focused on three critical parameters: ambient pressure (0.1/0.5/1.0 MPa), injection duration (0.25-0.80 ms), and ambient temperature (293/323/373 K). Results demonstrate that ambient pressure variations significantly influence spray penetration and spray spread angle, and under ambient pressure conditions of 0.1 MPa, the spray undergoes collapse. Conversely, injection duration and ambient temperature adjustments demonstrated minimal influence on both penetration and spread angle.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Combustion Engine Technologies · Catalytic Processes in Materials Science
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Aleiferis, P.G. and van Romunde, Z.R., An Analysis of Spray Development with Iso-Octane, N-Pentane, Gasoline, Ethanol and N-Butanol from a Multi-Hole Injector under Hot Fuel Conditions, Fuel., vol. 105, pp. 143-168, 2013.10.1016/j.fuel.2012.07.044 ↗
2. Alvarez-Herrera, C., Moreno-Hernández, D., Barrientos-Garcia, B., and Guerrero-Viramontes, J.A., Temperature Measurement of Air Convection Using a Schlieren System, Opt. Laser Technol., vol. 41, pp. 233-240, 2009.10.1016/j.optlastec.2008.07.004 ↗
3. Cardoso, J.S., Silva, V., Rocha, R.C., Hall, M.J., Costa, M., and Eusébio, D., Ammonia as an Energy Vector: Current and Future Prospects for Low-Carbon Fuel Applications in Internal Combustion Engines, J. Clea. Prod., vol. 296, p. 126562, 2021.10.1016/j.jclepro.2021.126562 ↗
4. Charonko, J.J. and Prestridge, K. Variable-Density Mixing in Turbulent Jets with Coflow, J. Fluid Mech., vol. 825, pp. 887-921, 2017.10.1017/jfm.2017.379 ↗
5. Feng, Y., Xie, R., Wu, Z., and Marsh, K.N., Vapor-Liquid Equilibria for Ammonia + Methanol, J. Chem. Eng. Data, vol. 44, no. 3, pp. 401-404, 1999.10.1021/je980244n ↗
6. Frigo, S. and Gentili, R., Analysis of the Behaviour of a 4-Stroke Si Engine Fuelled with Ammonia and Hydrogen, Int. J. Hydrogen Energy, vol. 38, no. 3, pp. 1607-1615, 2013.10.1016/j.ijhydene.2012.10.114 ↗
7. Han, X., Wang, Z., Costa, M., Sun, Z., He, Y., and Cen, K., Experimental and Kinetic Modelling Study of Laminar Burning Velocities of NH3/Air, NH3/H2/Air, NH3/CO/Air and NH3/CH4/Air Premixed Flames, Combust. Flame, vol. 206, pp. 214-226, 2019.10.1016/j.combustflame.2019.05.003 ↗
8. He, X., Shu, B., Nascimento, D., Moshammer, K., Costa, M., and Fernandes, R.X., Auto-Ignition Kinetics of Ammonia and Ammonia/Hydrogen Mixtures at Intermediate Temperature and High Pressures, Combust. Flame, vol. 206, pp. 189-200, 2019.10.1016/j.combustflame.2019.04.050 ↗
9. Hu, Z., Zhang, J., Sjoberg, M., and Zeng, W., The Use of Partial Fuel Stratification to Enable Stable Ultra-Lean Deflagration-Based Spark-Ignition Engine Operation with Controlled End-Gas Autoignition of Gasoline and E85, Int. J. Engine Res., vol. 21, no. 9, pp. 1678-1695, 2020.10.1177/1468087419889702 ↗
10. Kalwar, A., Agarwal, A.K., Pham, Q., Park, S., and Park, S., Numerical Study of Direct Injection Spray Behavior of Gasoline and Methanol-Gasoline Blends Under Split-Injection Strategy in Engine-Like Conditions, Atomization Sprays, vol. 33, pp. 17-38, 2023.10.1615/AtomizSpr.2023046136 ↗
11. Kobayashi, H., Hayakawa, A., Somarathne, K.K.A., and Okafor, E.C., Science and Technology of Ammonia Combustion, Proc. Combust Institute, vol. 37, pp. 109-133, 2019.10.1016/j.proci.2018.09.029 ↗
12. Kramm, K., Orth, M., Teiwes, A., Kammerhofer, J.C., Meunier, V., PietschâBraune, S., and Heinrich, S., Influence of Nozzle Parameters on Spray Pattern and Droplet Characteristics for a TwoâFluid Nozzle, Chem. Ing. Tech., vol. 95, pp. 151-159, 2023.10.1002/cite.202200152 ↗
13. Kumar, D. and Agarwal, A.K., Macroscopic Spray Characteristics of Gasoline, Methanol, and Ethanol in Direct Injection Spark Ignition Engine-Like Conditions, Atomization Sprays, vol. 33, pp. 25-43, 2023.10.1615/AtomizSpr.2023046258 ↗
14. Kuti, O.A. and Nishida, K., Effect of Fuel Types and Injection Conditions on Spray Formation and Gas Entrainment Processes in Diesel Engine, Atomization Sprays, vol. 34, pp. 37-56, 2024.10.1615/AtomizSpr.2024051100 ↗
15. Li, M., He, X., Hashemi, H., Glarborg, P., Lowe, V.M., Marshall, P., Fernandes, R., and Shu, B., An Experimental and Modelling Study on Auto-Ignition Kinetics of Ammonia/Methanol Mixtures at Intermediate Temperature and High Pressure, Combust. Flame, vol. 242, p. 112160, 2022.10.1016/j.combustflame.2022.112160 ↗
16. Li, M., Zhu, D., He, X., Moshammer, K., Fernandes, R., and Shu, B., Experimental and Kinetic Modelling Study on Auto-Ignition Properties of Ammonia/Ethanol Blends at Intermediate Temperature and High Pressures, Proc. Combust. Inst., vol. 39, no. 1, pp. 511-519, 2023.10.1016/j.proci.2022.07.151 ↗
17. Li, Y., Guo, H., Ma, X., Wang, J., and Xu, H., Droplet Dynamics of DI Spray from Sub-Atmospheric to Elevated Ambient Pressure, Fuel, vol. 179, pp. 25-35, 2016.10.1016/j.fuel.2016.03.047 ↗
18. Li, Y., Guo, H., Fei, S., Ma, X., Zhang, Z., Chen, L., Feng, L., and Wang, Z., An Exploration on Collapse Mechanism of Multi-Jet Flash-Boiling Sprays, Appl. Therm. Eng., vol. 134, pp. 20-28, 2018.10.1016/j.applthermaleng.2018.01.102 ↗
19. Lin, Z., Liu, S., Sun, Q., Qi, Y., Wang, Z., and Li, J., Effect of Injection and Ignition Strategy on an Ammonia Direct Injection-Hydrogen Jet Ignition (ADI-HJI) Engine, Energy, vol. 306, p. 132502, 2024.10.1016/j.energy.2024.132502 ↗
20. Liu, L., Peng, Y., Liu, D., Han, C., Zhao, N., and Ma, X., A Review of Phenomenological Spray Penetration Modelling for Diesel Engines with Advanced Injection Strategy, Int. J. Spray Combust. Dyn., vol. 12, 2020.10.1177/1756827720934067 ↗
21. Liu, S., Lin, Z., Qi, Y., Wang, Z., Yang, D., Lu, G., and Wang, B., Combustion and Emission Characteristics of a Spark Ignition Engine Fuelled with Ammonia/Gasoline and Pure Ammonia, Appl. Energy, vol. 279, p. 118425, 2024.10.1016/j.apenergy.2024.123538 ↗
22. Liu, Z., Zhou, L., Zhong, L., and Wei, H., Enhanced Combustion of Ammonia Engine Based on Novel Air-Assisted Pre-Chamber Turbulent Jet Ignition, Energy Convers. Manage., vol. 276, p. 116526, 2022.10.1016/j.enconman.2022.116526 ↗
23. Long, Q., Li, M., Zhou, Y., Hu, Z., and Li, L., Simulation Research on Ultra-Lean Constant-Volume Combustion Initiated by Spark-Ignited Micro-Fuel-Jet, WCX SAE World Congress Experience, SAE Int., Warrendale, PA, SAE Technical Paper No. 2022-03-29, 2022.10.4271/2022-01-0432 ↗
24. Morch, C.S., Bjerre, A., Gottrup, M.P., Sorenson, S.C..and Schramm, J., Ammonia/Hydrogen Mixtures in an SI-Engine: Engine Performance and Analysis of a Proposed Fuel System, Fuel, vol. 90, no. 2, pp. 854-864, 2011.10.1016/j.fuel.2010.09.042 ↗
25. Morgan, E., Manwell, J., and McGowan, J., Wind-Powered Ammonia Fuel Production for Remote Islands: A Case Study, Renew. Energy, vol. 72, pp. 51-61, 2014.10.1016/j.renene.2014.06.034 ↗
26. Mounaim-Rousselle, C., Mercier, A., Brequigny, P., Dumand, C., Bouriot, J., and Houillé, S., Performance of Ammonia Fuel in a Spark Assisted Compression Ignition Engine, Int. J. Engine Res., vol. 23, no. 5, pp. 781-792, 2022.10.1177/14680874211038726 ↗
27. Müller, C., Morcinkowski, B., Schernus, C., Habermann, K., Ulhmann, T., Development of a Pre-Chamber for Spark Ignition Engines in Vehicle Applications, Ignition Systems for Gasoline Engine 2018, 4th International Conference, Berlin, Germany. pp. 261-274, 2018.
28. Noritaka, K., Hiroki, K., and Naohiro, I. Study of Gasoline Pre-Chamber Combustion at Lean Operation, Ignition Systems for Gasoline Engines 2018, 4th Int. Conf., Berlin, Germany, pp. 275-291, 2018.
29. Ott, J., Gronemann, V., Pontzen, F., Fiedler, E., Grossmann, G., Kersebohm, D.B., Weiss, G., and Witte, C., Methanol, Ullmann's Encyclopedia of Industrial Chemistry, John Wiley & Sons, Inc., New York, 2012.10.1002/14356007.a16_465.pub3 ↗
30. Reiter, A.J. and Kong, S.C., Combustion and Emissions Characteristics of Compression-Ignition Engine Using Dual Ammonia-Diesel Fuel, Fuel, vol. 90, no. 1, pp. 87-97, 2011.10.1016/j.fuel.2010.07.055 ↗
31. Ryu, K., Zacharakis-Jutz, G.E., and Kong, S.C., Performance Characteristics of Compression-Ignition Engine Using High Concentration of Ammonia Mixed with Dimethyl Ether, Appl. Energy, vol. 113, pp. 488-499, 2014.10.1016/j.apenergy.2013.07.065 ↗
32. Shu, B., He, X., Ramos, C.F., Fernandes, R.X., and Costa, M., Experimental and Modelling Study on the Auto-Ignition Properties of Ammonia/Methane Mixtures at Elevated Pressures, Proc. Combust. Inst., vol. 38, no. 1, pp. 261-268, 2021.10.1016/j.proci.2020.06.291 ↗
33. Tang, M., Pei, Y., Zhang, Y., Tzanetakis, T., Traver, M., Cleary, D., Quan, S., Naber, J., and Lee, S.Y., Development of a Transient Spray Cone Angle Correlation for CFD Simulations at Diesel Engine Conditions, SAE Int., Warrendale, PA, SAE Technical Paper No. 2018-01-0304, 2018.10.4271/2018-01-0304 ↗
34. Tomida, D., Suzuki, K., Katou, Y., and Yokoyama, C., Vapor Pressures and Liquid Densities of Ammonium Chloride+ Ammonia Mixtures, J. Chem. Eng. Data, vol. 53, no. 7, pp. 1583-1586, 2008.10.1021/je8001267 ↗
35. Valera-Medina, A., Xiao, H., Owen-Jones, M., David, W.I., and Bowen, P.J., Ammonia for Power, Prog. Energy Combust. Sci., vol. 69, pp. 63-102, 2018.10.1016/j.pecs.2018.07.001 ↗
36. Wang, D., Ji, C., Wang, Z., Wang, S., Zhang, T., and Yang, J., Measurement of Oxy-Ammonia Laminar Burning Velocity at Normal and Elevated Temperature, Fuel, vol. 279, p. 118425, 2020.10.1016/j.fuel.2020.118425 ↗
37. Wang, Z., Xu, H., Jiang, C., and Wyszynski, M.L., Experimental Study on Microscopic and Macroscopic Characteristics of Diesel Spray with Split Injection, Fuel, vol. 174, pp. 140-152, 2016.10.1016/j.fuel.2016.01.083 ↗
38. Xu, M., Zhang, Y., Zeng, W., Zhang, G., and Zhang, M., Flash Boiling: Easy and Better Way to Generate Ideal Sprays Than the High Injection Pressure, SAE Int. J. Fuels Lubr., vol. 6, no. 1, pp. 137-148, 2013.10.4271/2013-01-1614 ↗
39. Xu, Q., Pan, H., Gao, Y., Li, X., and Xu, M., Investigation of Two-Hole Flash-Boiling Plume-to-Plume Interaction and Its Impact on Spray Collapse, Int. J. Heat Mass Transf., vol. 138, pp. 608-619, 2019.10.1016/j.ijheatmasstransfer.2019.04.111 ↗
40. Yu, W., Li, M., Long, Q., Qin, X., Dong, G., Hu, Z., Qian, J., and Li, Y., Combustion of Premixed Ammonia and Air Initiated by Spark-Ignited Micro-Gasoline-Jet in a Constant Volume Combustible Vessel, 202310.4271/2023-32-0066 ↗
41. JSAE/SAE Powertrains, Energy and Lubricants Int. Meeting., SAE Int., Warrendale, PA, SAE Technical Paper No. 2023-32-0066, 2023.
42. Zeng, W., Xu, M., Zhang, G., Zhang, Y., and Cleary, D.J., Atomization and Vaporization for Flash-Boiling Multi-Hole Sprays with Alcohol Fuels, Fuel, vol. 95, pp. 287-297, 2012.10.1016/j.fuel.2011.08.048 ↗
43. Zhang, Y., Xu, L., Zhu, Y., Xu, S., and Bai, X.S., Numerical Study on Liquid Ammonia Direct Injection Spray Characteristics Under Engine-Relevant Conditions, Appl. Energy, vol. 334, p. 120680, 2023.10.1016/j.apenergy.2023.120680 ↗
44. Zhou, X., Li, T., Lai, Z., and Wei, Y., Modelling Diesel Spray Tip and Tail Penetrations after End-of-Injection, Fuel, vol. 237, pp. 442-456, 2019.10.1016/j.fuel.2018.10.029 ↗