journal article·2025

INTERNAL NOZZLE SIMULATIONS OF FLASH BOILING LIQUID AMMONIA SPRAYS FOR ENGINE APPLICATIONS

Aman Kumar, Noah Van Dam

Atomization and Sprays· Volume 35· Issue 5
Publisher page

Abstract

Ammonia (NH3) is seen as a promising fuel, especially for marine applications, because it contains zero carbon, has robust global infrastructure, and only requires modest pressures (< 1 MPa) to store as a liquid at room temperature. When stored as a liquid, ammonia has a higher volumetric energy density than compressed gaseous hydrogen, the other main zero-carbon fuel candidate. Due to the very high saturation vapor pressure of ammonia, it is expected that liquid ammonia sprays will undergo flash boiling at most engine operating conditions, potentially requiring changes to current injection strategies. Liquid ammonia injectors are under active research and development due to compatibility issues with materials used in standard injectors. In addition, safety considerations in setting up experiments have contributed to only limited experimental data being currently available. This study examines ammonia sprays using volume of fluid (VOF) computational fluid dynamics (CFD) simulations with increasing pressure ratios to better understand liquid ammonia spray behaviors, especially under extreme flash boiling conditions. The geometry for a single-hole research injector (Spray M) from the Engine Combustion Network (ECN) was used based on preliminary experimental data available for this injector. Results show experimental trends are captured. Liquid ammonia sprays under engine-like conditions also undergo extreme flash boiling, generating large amounts of vapor within the injector counterbore and creating underexpanded jet-like conditions in the near-nozzle region. Details of the conditions at the injector tip are explored to understand implications for the setup of future parcel-based simulations for full engine simulations.
Source: openalex_inverted_index · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electrohydrodynamics and Fluid Dynamics · Catalytic Processes in Materials Science · Aerosol Filtration and Electrostatic Precipitation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Ailaboina, A. and Saha, K., On Modeling of Spray G ECN Using ROI-Based Eulerian-Lagrangian Simulation, Front. Mech. Eng., vol. 8, Article 880635, 2022.10.3389/fmech.2022.880635 ↗
2. An, Z., Xing, J., and Kurose, R., Numerical Study on the Phase Change and Spray Characteristics of Liquid Ammonia Flash Spray, Fuel, vol. 345, Article 128229, 2023.10.1016/j.fuel.2023.128229 ↗
3. Arienti, M., Hwang, J., Pickett, L., and Shekhawat, Y., A Thermally-Limited Bubble Growth Model for the Relaxation Time of Superheated Fuels, Int. J. Heat Mass Transf., vol. 159, Article 120089, 2020.10.1016/j.ijheatmasstransfer.2020.120089 ↗
4. Bilicki, Z. and Kestin, J., Physical Aspects of the Relaxation Model in Two-Phase Flow, Proc. R. Soc. London Ser. A Math. Phys. Sci., vol. 428, no. 1875, pp. 379-397, 1990.10.1098/rspa.1990.0040 ↗
5. Chang, M., Lee, Z., Park, S., and Park, S., Characteristics of Flash Boiling and Its Effects on Spray Behavior in Gasoline Direct Injection Injectors: A Review, Fuel, vol. 271, Article 117600, 2020.10.1016/j.fuel.2020.117600 ↗
6. Desclaux, A., Pele, R., Hespel, C., and Mounaim-Rousselle, C., Liquid Ammonia Injection on Single Hole Injector: Effect of Initial Conditions on Flash Boiling Process, 32nd European Conference on Liquid Atomization and Spray System, ILASS Europe 2023, Napoli, Italy, 2023.
7. Dincer, I., Thermodynamics: A Smart Approach, Hoboken, NJ: Wiley, 2021.10.1002/9781119711117 ↗
8. Duke, D.J., Kastengren, A.L., Matusik, K.E., Swantek, A.B., Powell, C.F., Payri, R., Vaquerizo, D., Itani, L., Bruneaux, G., Grover, R.O., Parrish, S., Markle, L., Schmidt, D., Manin, J., Skeen, S.A., and Pickett, L.M., Internal and near Nozzle Measurements of Engine Combustion Network 'Spray G' Gasoline Direct Injectors, Exp. Therm. Fluid Sci., vol. 88, pp. 608-621, 2017.10.1016/j.expthermflusci.2017.07.015 ↗
9. Duronio, F., De Vita, A., Allocca, L., and Anatone, M., Gasoline Direct Injection Engines-A Review of Latest Technologies and Trends. Part 1: Spray Breakup Process, Fuel, vol. 265, Article 116948, 2020.10.1016/j.fuel.2019.116948 ↗
10. ECN, Engine Combustion Network, Sandia National Laboratories, accessed from https://ecn.sandia.gov/, 2023.
11. Franquet, E., Perrier, V., Gibout, S., and Bruel, P., Free Underexpanded Jets in a Quiescent Medium: A Review, Prog. Aerospace Sci., vol. 77, pp. 25-53, 2015.10.1016/j.paerosci.2015.06.006 ↗
12. Gartner, J.W., Feng, Y., Kronenburg, A., and Stein, O.T., Numerical Investigation of Spray Collapse in GDI with OpenFOAM, Fluids, vol. 6, no. 3, Article 104, 2021.10.3390/fluids6030104 ↗
13. Guo, H., Li, Y., Wang, B., Zhang, H., and Xu, H., Numerical Investigation on Flashing Jet Behaviors of Single-Hole GDI Injector, Int. J. Heat Mass Transf., vol. 130, pp. 50-59, 2019.10.1016/j.ijheatmasstransfer.2018.10.088 ↗
14. Guo, H., Nocivelli, L., Torelli, R., and Som, S., Towards Understanding the Development and Characteristics of Under-Expanded Flash Boiling Jets, Int. J. Multiphase Flow, vol. 129, Article 103315, 2020.10.1016/j.ijmultiphaseflow.2020.103315 ↗
15. Herbinet, O., Bartocci, P., and Grinberg Dana, A., On the Use of Ammonia as a Fuel-A Perspective, Fuel Commun., vol. 11, Article 100064, 2022.10.1016/j.jfueco.2022.100064 ↗
16. Jain, M., Muthalathu, R., andWu, X.Y., Electrified Ammonia Production as a Commodity and Energy Storage Medium to Connect the Food, Energy, and Trade Sectors, iScience, vol. 25, no. 8, Article 104724, 2022.10.1016/j.isci.2022.104724 ↗
17. Kumar, A., Boussom, J.A., and Van Dam, N., Large-Eddy Simulation Study of Injector Geometry and Parcel Injection Location on Spray Simulation of the Engine Combustion Network Spray G Injector, J. Eng. Gas Turbines Power, vol. 146, no. 8, Article 081003, 2024.10.1115/1.4063957 ↗
18. Kumar, A. and Van Dam, N., Study of Injector Geometry and Parcel Injection Location on Spray Simulation of the Engine Combustion Network Spray G Injector, J. Eng. Gas Turbines Power, vol. 145, no. 7, Article 071012, 2023.10.1115/1.4062414 ↗
19. Launder, B.E., Morse, A., Rodi, W., and Spalding, D.B., Prediction of Free Shear Flows: A Comparison of the Performance of Six Turbulence Models, NASA Tech. Rep. 19730019433, 1973.
20. Lewandowski, M.T., Pasternak, M., Haugsvær, M., and Lovas, T., Simulations of Ammonia Spray Evaporation, Cooling, Mixture Formation and Combustion in a Direct Injection Compression Ignition Engine, Int. J. Hydrogen Energy, vol. 52, pp. 916-935, 2024.10.1016/j.ijhydene.2023.06.143 ↗
21. Li, S., Li, T., Wang, N., Zhou, X., Chen, R., and Yi, P., An Investigation on Near-Field and Far-Field Characteristics of Superheated Ammonia Spray, Fuel, vol. 324, Article 124683, 2022.10.1016/j.fuel.2022.124683 ↗
22. Lide, D.R. and Kehiaian, H.V., CRC Handbook of Thermophysical and Thermochemical Data, Boca Raton, FL: CRC Press, 2020.10.1201/9781003067719 ↗
23. Moulai, M., Grover, R., Parrish, S., and Schmidt, D., Internal and Near-Nozzle Flow in a Multi-Hole Gasoline Injector under Flashing and Non-Flashing Conditions, SAE 2015 World Congress & Exhibition, Detroit, MI, 2015.10.4271/2015-01-0944 ↗
24. Niknam, P.H., Fiaschi, D., Mortaheb, H., and Mokhtarani, B., An Improved Formulation for Speed of Sound in Two-Phase Systems and Development of 1D Model for Supersonic Nozzle, Fluid Phase Equilibria, vol. 446, pp. 18-27, 2017.10.1016/j.fluid.2017.05.013 ↗
25. Paredi, D., Lucchini, T., D'Errico, G., Onorati, A., Pickett, L., and Lacey, J., Validation of a Comprehensive Computational Fluid Dynamics Methodology to Predict the Direct Injection Process of Gasoline Sprays Using Spray G Experimental Data, Int. J. Engine Res., vol. 21, no. 1, pp. 199-216, 2020.10.1177/1468087419868020 ↗
26. Payri, R., Gimeno, J., Marti-Aldaravi, P., and Vaquerizo, D., Momentum Flux Measurements on an ECN GDi Injector, JSAE/SAE 2015 Int. Powertrains, Fuels & Lubricants Meeting, Kyoto, Japan, 2015.10.4271/2015-01-1893 ↗
27. Payri, R., Marti-Aldaravi, P., Abboud, R., and Bautista, A., Numerical Analysis of GDI Flash Boiling Sprays Using Different Fuels, Energies, vol. 14, no. 18, Article 5925, 2021.10.3390/en14185925 ↗
28. Pele, R., Mounaim-Rousselle, C., Brequigny, P., Hespel, C., and Bellettre, J., First Study on Ammonia Spray Characteristics with a Current GDI Engine Injector, Fuels, vol. 2, no. 3, pp. 253-271, 2021.10.3390/fuels2030015 ↗
29. Pope, S.B., An Explanation of the Turbulent Round-Jet/Plane-Jet Anomaly, AIAA J., vol. 16, no. 3, pp. 279-281, 1978.10.2514/3.7521 ↗
30. Poursadegh, F., Lacey, J.S., Brear, M.J., Gordon, R.L., Petersen, P., Lakey, C., Butcher, B., Ryan, S., and Kramer, U., On the Phase and Structural Variability of Directly Injected Propane at Spark Ignition Engine Conditions, Fuel, vol. 222, pp. 294-306, 2018.10.1016/j.fuel.2018.02.137 ↗
31. Price, C., Hamzehloo, A., Aleiferis, P., and Richardson, D., An Approach to Modeling Flash-Boiling Fuel Sprays for Direct-Injection Spark-Ignition Engines, Atomization Sprays, vol. 26, no. 12, pp. 1197-1239, 2016.10.1615/AtomizSpr.2016015807 ↗
32. Raju, M.S., CFD Modeling of Superheated Fuel Sprays, 47th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition, Orlando, FL, 2009.10.2514/6.2009-1187 ↗
33. Richards, K., Senecal, P., and Pomraning, E., CONVERGE 4.0.2, Convergent Science, Madison, WI, 2024.
34. Saha, K., Quan, S., Battistoni, M., Som, S., Senecal, P.K., and Pomraning, E., Coupled Eulerian Internal Nozzle Flow and Lagrangian Spray Simulations for GDI Systems, SAE Tech. Pap. No. 2017-01-0834, 2017.10.4271/2017-01-0834 ↗
35. Sazhin, S.S., Advanced Models of Fuel Droplet Heating and Evaporation, Prog. Energy Combust. Sci., vol. 32, no. 2, pp. 162-214, 2006.10.1016/j.pecs.2005.11.001 ↗
36. Shen, L. and Leach, F., Effect of Ambient Pressure on Ammonia Sprays Using a Single Hole Injector, WCX SAE World Congress Experience, Detroit, MI, 2024.10.4271/2024-01-2618 ↗
37. Som, S., Longman, D., Aithal, S., Bair, R., Garca, M., Quan, S., Richards, K.J., Senecal, P.K., Shethaji, T., and Weber, M., A Numerical Investigation on Scalability and Grid Convergence of Internal Combustion Engine Simulations, SAE Tech. Rep. No. 2013-01-1095, 2013.10.4271/2013-01-1095 ↗
38. Torelli, R., D'Errico, G., Lucchini, T., Ikonomou, V., and McDavid, R.M., A Spherical Volume Interaction DDM Approach for Diesel Spray Modeling, Atomization Sprays, vol. 25, no. 4, pp. 335-374, 2015.10.1615/AtomizSpr.2015010623 ↗
39. Valera-Medina, A., Amer-Hatem, F., Azad, A.K., Dedoussi, I.C., de Joannon, M., Fernandes, R.X., Glarborg, P., Hashemi, H., He, X., Mashruk, S., McGowan, J., Mounaim-Rouselle, C., Ortiz-Prado, A., Ortiz-Valera, A., Rossetti, I., Shu, B., Yehia, M., Xiao, H., and Costa, M., Review on Ammonia as a Potential Fuel: From Synthesis to Economics, Energy Fuels, vol. 35, no. 9, pp. 6964-7029, 2021.10.1021/acs.energyfuels.0c03685 ↗
40. Wu, S., Yang, S.,Wooldridge, M., and Xu, M., Experimental Study of the Spray Collapse Process of Multi-Hole Gasoline Fuel Injection at Flash Boiling Conditions, Fuel, vol. 242, pp. 109-123, 2019.10.1016/j.fuel.2019.01.027 ↗
41. Zembi, J., Battistoni, M., Pandal, A., Mounaim-Rousselle, C., Pele, R., Brequigny, P., and Hespel, C., Numerical Study of Ammonia Spray with a GDI Engine Injector, J. Ammonia Energy, vol. 1, no. 1, pp. 59-73, 2023.10.18573/jae.13 ↗
42. Zhang, J., Li, Y., Xu, H., Liu, Y., Ma, X., Xu, H., and Shuai, S., Characterizing Under-Expansion Behaviors Induced by Rapid Phase Change of Flash-Boiling Jets, Fuel, vol. 329, Article 125404, 2022.10.1016/j.fuel.2022.125404 ↗
43. Zhou, Z.F., Lu, G.Y., Zhu, D.Q., Zhang, L., Wang, J.F., and Chen, B., The Performance of Droplet Evaporation Model in Predicting Droplet Dynamics and Thermal Characteristics for R134a Single Isolated Droplet and Two-Phase Flashing Spray, Aerospace Sci. Technol., vol. 93, Article 105363, 2019.10.1016/j.ast.2019.105363 ↗