journal article·2024

EXPERIMENTAL STUDY ON FLASH BOILING SPRAY OF HIGH-PRESSURE LIQUID AMMONIA JET WITH ROUND AND ELLIPTICAL HOLE NOZZLES

Chen Li, Zhixia He, Yizhou Yang, Jiafeng Chen, Wenjun Zhong

Atomization and Sprays· Volume 34· Issue 5
Publisher page

Abstract

Ammonia is an ideal alternative fuel for mitigating carbon emissions. High-pressure direct injection of liquid ammonia (LNH3) offers significant advantages in enhancing energy efficiency and minimizing emissions. Due to the high saturation vapor pressure, the injection of LNH3 is susceptible to flash boiling. In this study, we used high-speed micro-imaging technology with backlight lighting to establish a high-pressure common-rail LNH3 jet experimental platform and investigate the flash boiling spray characteristics of nozzles with round and elliptical holes. The results demonstrated that under non-flash boiling conditions, the residual LNH3 in the sac chamber and nozzle can rapidly corrode the acrylic material of the nozzle, leading to deformation and failure of the nozzle structure. Under flash boiling conditions, LNH3 ejected from the hole will produce spherical macroscopic spray morphology. Then, the spray gradually transitions from an elliptical profile to a conical profile as the back pressure increases. Compared to nozzles with round holes, nozzles with elliptical holes exhibit higher flow velocity, which enhances oil-gas mixing and promotes more pronounced flash boiling phenomena. Flash boiling occurs at an earlier stage with an increase in the spray cone angle, thereby improving the atomization characteristics under both flash and non-flash boiling conditions. The tail jet of nozzles with elliptical holes terminates earlier while exhibiting a higher decrease rate in the average gray value, which improves the atomization quality in the tail spray stage and meets the requirements of timing, quantification, and precise control of the fuel injection system.
Source: openalex_inverted_index · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fluid Dynamics and Heat Transfer · Combustion and Detonation Processes · Combustion and flame dynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Aakko-Saksa, P.T., Lehtoranta, K., Kuittinen, N., Jarvinen, A., Jalkanen, J.P., Johnson, K., Jung, H., Ntziachristos, L., Gagne, S., Takahashi, C., Karjalainen, P., Ronkko, T., and Timonen, H., Reduction in Greenhouse Gas and Other Emissions from Ship Engines: Current Trends and Future Options, Prog. Energy Combust. Sci., vol. 94, Article ID 101055, 2023. DOI: 10.1016/j.pecs.2022.10105510.1016/j.pecs.2022.101055 ↗
2. Chai, W.S., Bao, Y., Jin, P., Tang, G., and Zhou, L., A Review on Ammonia, Ammonia-Hydrogen and Ammonia-Methane Fuels, Renew. Sustain. Energy Rev., vol. 147, Article ID 111254, 2021. DOI: 10.1016/j.rser.2021.11125410.1016/j.rser.2021.111254 ↗
3. Colson, S., Yamashita, H., Oku, K., Somarathne, K.D.K.A., Kudo, T., Hayakawa, A., and Kobayashi, H., Study on the Effect of Injection Temperature and Nozzle Geometry on the Flashing Transition of Liquid Ammonia Spray, Fuel, vol. 348, Article ID 128612, 2023. DOI: 10.1016/j.fuel.2023.12861210.1016/j.fuel.2023.128612 ↗
4. Dan, T., Ohishi, N., Senda, J., and Fujimoto, H., Atomization Mechanism in Diesel Fuel Spray, JSME Int. J., Ser. B (Nihon Kikai Gakkai Rombunshu), vol. 60, pp. 3192-3197, 1994. DOI: 10.1299/kikaib.60.319210.1299/kikaib.60.3192 ↗
5. Dimitriou, P. and Javaid, R., A Review of Ammonia as a Compression Ignition Engine Fuel, Int. J. Hydrogen Energy, vol. 45, pp. 7098-7118, 2020. DOI: 10.1016/j.ijhydene.2019.12.20910.1016/j.ijhydene.2019.12.209 ↗
6. Gross, C.W. and Kong, S.-C., Performance Characteristics of a Compression-Ignition Engine Using Direct-Injection Ammonia-DME Mixtures, Fuel, vol. 103, pp. 1069-1079, 2013. DOI: 10.1016/j. fuel.2012.08.02610.1016/j.fuel.2012.08.026 ↗
7. Jia, H., Jian, Y., Yin, B., Yang, J., and Liu, Z., Experimental Study on the Combustion, Emissions and Fuel Consumption of Elliptical Nozzle Diesel Engine, Energy, vol. 262, Article ID 125449, 2023. DOI: 10.1016/j.energy.2022.12544910.1016/j.energy.2022.125449 ↗
8. Kurien, C. and Mittal, M., Review on the Production and Utilization of Green Ammonia as an Alternate Fuel in Dual-Fuel Compression Ignition Engines, Energy Convers. Manage., vol. 251, Article ID 114990, 2022. DOI: 10.1016/j.enconman.2021.11499010.1016/j.enconman.2021.114990 ↗
9. Li, S., Li, T., Wang, N., Zhou, X., Chen, R., and Yi, P., An Investigation on Near-Field and Far-Field Characteristics of Superheated Ammonia Spray, Fuel, vol. 324, Article ID 124683, 2022a. DOI: 10.1016/j. fuel.2022.12468310.1016/j.fuel.2022.124683 ↗
10. Li, T., Zhou, X., Wang, N., Wang, X., Chen, R., Li, S., and Yi, P., A Comparison between Low- and High-Pressure Injection Dual-Fuel Modes of Diesel-Pilot-Ignition Ammonia Combustion Engines, J. Energy Inst., vol. 102, pp. 362-373, 2022b. DOI: 10.1016/j.joei.2022.04.00910.1016/j.joei.2022.04.009 ↗
11. Nadimi, E., Przybyla, G., Lovas, T., Peczkis, G., and Adamczyk, W., Experimental and Numerical Study on Direct Injection of Liquid Ammonia and Its Injection Timing in an Ammonia-Biodiesel Dual Injection Engine, Energy, vol. 284, Article ID 129301, 2023. DOI: 10.1016/j.energy.2023.12930110.1016/j.energy.2023.129301 ↗
12. Payri, R., Garcia-Oliver, J.M., Bracho, G., and Cao, J., Experimental Characterization of Direct Injection Liquid Ammonia Sprays under Non-Reacting Diesel-Like Conditions, Fuel, vol. 362, Article ID 130851, 2024. DOI: 10.1016/j.fuel.2023.13085110.1016/j.fuel.2023.130851 ↗
13. Pele, R., Mounaim-Rousselle, C., Brequigny, P., Hespel, C., and Bellettre, J., First Study on Ammonia Spray Characteristics with a Current GDI Engine Injector, Fuels, vol. 2, pp. 253-271, 2021. DOI: 10.3390/fuels203001510.3390/fuels2030015 ↗
14. Reitz, H.R., Ogawa, H., Payri, R., Fansler, T., Kokjohn, S., Moriyoshi, Y., Agarwal, A.K., Arcoumanis, D., Assanis, D., Bae, C., Boulouchos, K., Canakci, M., Curran, S., Denbratt, I., Gavaises, M., Guenthner, M., Hasse, C., Huang, Z., Ishiyama, T., Johansson, B., Johnson, T.V., Kalghatgi, G., Koike, M., Kong, S.C., Leipertz, A., Miles, P., Novella, R., Onorati, A., Richter, M., Shuai, S., Siebers, D., Su, W., Trujillo, M., Uchida, N., Vaglieco, B.M., Wagner, R.M., and Zhao, H., IJER Editorial: The Future of the Internal Combustion Engine, Int. J. Engine Res., vol. 21, pp. 1-8, 2019. DOI: 10.1177/146808741987799010.1177/1468087419877990 ↗
15. Verhelst, S., Turner, J.W.G., Sileghem, L., and Vancoillie, J., Methanol as a Fuel for Internal Combustion Engines, Prog. Energy Combust. Sci., vol. 70, pp. 43-88, 2019. DOI: 10.1016/j.pecs.2018.10.00110.1016/j.pecs.2018.10.001 ↗
16. Wang, Z., Dai, X., Liu, F., Li, Z., and Wu, H., Breakup of Fuel Sprays under Cavitating and Flash Boiling Conditions, Appl. Therm. Eng., vol. 143, pp. 22-33, 2018. DOI: 10.1016/j.applthermaleng. 2018.07.09010.1016/j.applthermaleng.2018.07.090 ↗
17. Yu, S., Yin, B., Deng, W., Jia, H., Ye, Z., Xu, B., and Xu, H., Experimental Study on the Spray Characteristics Discharging from Elliptical Diesel Nozzle at Typical Diesel Engine Conditions, Fuel, vol. 221, pp. 28-34, 2018a. DOI: 10.1016/j.fuel.2018.02.09010.1016/j.fuel.2018.02.090 ↗
18. Yu, S., Yin, B., Deng, W., Jia, H., Ye, Z., Xu, B., and Xu, H., Internal Flow and Spray Characteristics for Elliptical Orifice with Large Aspect Ratio under Typical Diesel Engine Operation Conditions, Fuel, vol. 228, pp. 62-73, 2018b. DOI: 10.1016/j.fuel.2018.04.15610.1016/j.fuel.2018.04.156 ↗
19. Yu, S., Yin, B., Jia, H., Chen, C., and Xu, B., Investigation of Inner Cavitation and Nozzle Exit Flow Patterns for Elliptical Orifice GDI Injectors with Various Aspect Ratios, Int. Commun. Heat Mass Transf., vol. 129, Article ID 105682, 2021. DOI: 10.1016/j.icheatmasstransfer.2021.10568210.1016/j.icheatmasstransfer.2021.105682 ↗
20. Zeng, W., Xu, M., Zhang, G., Zhang, Y., and Cleary, D.J., Atomization and Vaporization for Flash-Boiling Multi-Hole Sprays with Alcohol Fuels, Fuel, vol. 95, pp. 287-297, 2012. DOI: 10.1016/j. fuel.2011.08.04810.1016/j.fuel.2011.08.048 ↗
21. Zhang, Z., Long, W., Cui, Z., Dong, P., Tian, J., Tian, H., and Meng, X., Visualization Study on the Ignition and Diffusion Combustion Process of Liquid Phase Ammonia Spray Ignited by Diesel Jet in a Constant Volume Vessel, Energy Convers. Manage., vol. 299, Article ID 117889, 2024. DOI: 10.1016/j.enconman. 2023.11788910.1016/j.enconman.2023.117889 ↗
22. Zhang, Z., Long, W., Dong, P., Tian, H., Tian, J., Li, B., and Wang, Y., Performance Characteristics of a Two-Stroke Low Speed Engine Applying Ammonia/Diesel Dual Direct Injection Strategy, Fuel, vol. 332, Article ID 126086, 2023. DOI: 10.1016/j.fuel.2022.12608610.1016/j.fuel.2022.126086 ↗
23. Zuo, B., Gomes, A.M., and Rutland, C.J., Modelling Superheated Fuel Spray and Vaporization, Int. J. Engine Res., vol. 1, pp. 321-336, 2000. DOI: 10.1243/146808700154521810.1243/1468087001545218 ↗