journal article·2022

NUMERICAL INVESTIGATION OF DUCTED FUEL INJECTION WITH DIFFERENT DUCT SIZES

Ziman Wang, Yuxin Zhang, Feng Li, Tawfik Badawy, Youwei Cao

Atomization and Sprays· Volume 32· Issue 10
Publisher page

Abstract

Soot reduction has attracted worldwide attention. Ducted fuel injection (DFI) is a newly established strategy that follows the idea of leaner lifted-flame combustion (LLFC), aiming to enhance premixing and reduce soot. A better understanding of spray characteristics of the mixing process is of great significance so that this technology can be fully applied. The study investigated ducted spray with different duct sizes through numerical simulation. Results showed that longer and narrower ducts lead to higher spray velocity due to decreased total gas entrainment,lower gas resistance and the restriction of radial development of the spray in the near field. Proper duct configuration improves spray atomization in terms of reducing droplet size. The analysis of a special appearance called a "mushroom-shaped" head was also conducted. As the jet penetrates through the duct, shearing vortexes form and develop. Under the effect of the pressure difference between the duct insides and outside, the spray tip deformed and diffused radially.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Combustion Engine Technologies · Combustion and flame dynamics · Heat transfer and supercritical fluids

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Atomization Characteristics on the Surface of a Round Liquid Jet10.1007/s00348-003-0675-0 ↗
2. Air Entrainment in Diesel-Like Gas Jet by Simultaneous Flow Velocity and Fuel Concentration Measurements, Comparison of Free and Wall Impinging Jet Configurations10.4271/2011-01-1828 ↗
3. Spray-Combustion Interaction Mechanism of Multiple-Injection under Diesel Engine Conditions10.1016/j.proci.2014.07.054 ↗
4. Early Investigation of Ducted Fuel Injection for Reducing Soot in Mixing-Controlled Diesel Flames10.4271/2018-01-0238 ↗
5. Leaner Lifted-Flame Combustion Enabled by the Use of an Oxygenated Fuel in an Optical CI Engine10.4271/2016-01-0730 ↗
6. Using Ducted Fuel Injection to Attenuate or Prevent Soot Formation in Mixing-Controlled Combustion Strategies for Engine Applications10.1016/j.apenergy.2018.05.078 ↗
7. A Dynamic Subgrid-Scale Eddy Viscosity Model10.1063/1.857955 ↗
8. Large Eddy Simulation of N-Dodecane Spray Combustion in a High Pressure Combustion Vessel10.1016/j.apenergy.2014.09.030 ↗
9. Large-Eddy Simulation of Dual-Fuel Ignition: Diesel Spray Injection into a Lean Methane-Air Mixture10.1016/j.combustflame.2018.10.014 ↗
10. Investigation on the Characteristics of Diesel Fuel Spray
11. Visualization Study on the Impacts of Duct Length on Macroscopic Spray Characteristics of Ducted Fuel Injection under Nonvaporizing Conditions
12. Impacts of Duct Inner Diameter and Standoff Distance on Macroscopic Spray Characteristics of Ducted Fuel Injection under Non-Vaporizing Conditions10.1177/1468087420914714 ↗
13. Schlieren Investigation on Impacts of Duct Size on Macroscopic Spray Characteristics of Ducted Fuel Injection
14. An Optical Investigation on Spray Macroscopic Characteristics of Ducted Fuel Injection
15. Liu, A.B., Mather, D., and Reitz, R.D., Modeling the Effects of Drop Drag and Breakup on Fuel Sprays, SAE Trans, pp. 83-95, 1993.10.4271/930072 ↗
16. Diesel Engines: Environmental Impact and Control10.1080/10473289.2001.10464315 ↗
17. Study of Low Soot or Soot-Free Leaner Lifted Flame Combustion in a Light Duty Optical Engine10.4271/2017-01-0691 ↗
18. Effects of Oxygenated Fuels on Combustion and Soot Formation/Oxidation Processes, SAE10.4271/2014-01-2657 ↗
19. Ducted Fuel Injection: Experimental and Numerical Investigation on Fuel Spray Characteristics, Air/Fuel Mixing and Soot Mitigation Potential10.1016/j.fuel.2020.119835 ↗
20. Ducted Fuel Injection: A Numerical Soot-Targeted Duct Geometry Optimization10.4271/03-15-02-0014 ↗
21. Millo, F., Segatori, C., Piano, A., Paradisi, B.P., and Bianco, A., An Engine Parameters Sensitivity Analysis on Ducted Fuel Injection in Constant-Volume Vessel Using Numerical Modeling, SAE Tech. Paper No. 2021-24-0015,2021c.10.4271/2021-24-0015 ↗
22. Mueller, C.J. and Martin, G.C., Effects of Oxygenated Compounds on Combustion and Soot Evolution in a DI Diesel Engine: Broadband Natural Luminosity Imaging, SAE Trans., pp. 518-537,2002.10.4271/2002-01-1631 ↗
23. Ducted Fuel Injection: A New Approach for Lowering Soot Emissions from Direct-Injection Engines10.1016/j.apenergy.2017.07.001 ↗
24. An Overview: Energy Saving and Pollution Reduction by Using Green Fuel Blends in Diesel Engines10.1016/j.apenergy.2015.08.084 ↗
25. Using Ducted Fuel Injection to Attenuate Soot Formation in a Mixing-Controlled Compression Ignition Engine10.4271/03-12-03-0021 ↗
26. Ducted Fuel Injection versus Conventional Diesel Combustion10.4271/03-13-03-0023 ↗
27. Ducted Fuel Injection vs. Conventional Diesel Combustion: Extending the Load Range in an Optical Engine with a Four-Orifice Fuel Injector
28. Ducted Fuel Injection vs. Free-Spray Injection10.4271/03-13-05-0044 ↗
29. O'Rourke, P.J. and Amsden, A.A., A Spray/Wall Interaction Submodel for the Kiva-3 Wall Film Model, SAE Trans, pp. 281-298,2000.10.4271/2000-01-0271 ↗
30. O'Rourke P.J. · 1981
31. The Potential of Large Eddy Simulation (LES) Code for the Modeling of Flow in Diesel Injectors10.1016/j.mcm.2010.02.033 ↗
32. Pickett, L.M. and Siebers, D.L., Non-Sooting, Low Flame Temperature Mixing-Controlled DI Diesel Combustion, SAE Trans., pp. 614-630, 2004.10.4271/2004-01-1399 ↗
33. An Experimental Investigation of Low-Soot and Soot-Free Combustion Strategies in a Heavy-Duty, Single-Cylinder, Direct-Injection, Optical Diesel Engine10.4271/2011-01-1812 ↗
34. A Review on Diesel Soot Emission, Its Effect and Control10.9767/bcrec.5.2.794.69-86 ↗
35. Comparisons of Diesel Spray Liquid Penetration and Vapor Fuel Distributions with In-Cylinder Optical Measurements10.1115/1.1290591 ↗
36. ANew Droplet Collision Algorithm10.1006/jcph.2000.6568 ↗
37. Ducted Fuel Injection: Effects of Stand-Off Distance and Duct Length on Soot Reduction10.4271/2019-01-0545 ↗
38. Effects of Ultra-High Injection Pressure and Micro-Hole Nozzle on Flame Structure and Soot Formation of Impinging Diesel Spray10.1016/j.apenergy.2010.11.035 ↗
39. Solid Particulate Mass and Number from Ducted Fuel Injection in an Optically Accessible Diesel Engine in Skip-Fired Operation10.1177/14680874211010560 ↗
40. Impacts of Nozzle Geometry on Spray Combustion of High Pressure Common Rail Injectors in a Constant Volume Combustion Chamber10.1016/j.fuel.2016.03.097 ↗
41. Numerical Research on Micro Diesel Spray Characteristics under Ultra-High Injection Pressure by Large Eddy Simulation (LES)10.1016/j.ijheatfluidflow.2017.03.003 ↗