journal article·2011

CHARACTERIZATION OF FULL CONE NOZZLES

Boris Kohnen, Damian Pieloth, Emir Musemic, Peter Walzel

Atomization and Sprays· Volume 21· Issue 4
Publisher page

Abstract

The drop size distribution (DSD) and the spray angle of full cone nozzles are measured at different atomization pressures and corresponding volumetric flow rates of water. The measurements of the DSDs were performed with laser diffraction spectrometry. The nozzles characterized here are geometrically similar models in the photo scale 1:8, 1:10, and 1:12 in relation to the original nozzle (1:1) used as the main sprayer in an industrial dust scrubber with an orifice diameter of DN = 96 mm. For all nozzles the spray pattern and flux density is characterized by means of a mechanical patternator. The overall volume frequency distribution q3(d) is calculated by a weighting procedure. The dimensionless droplet diameter dp/DN for different characteristic drop sizes( d10.3, d50.3, and d90.3) can be extrapolated to the operating conditions of the original nozzle. The spray angle of the full cone nozzles is obtained by evaluation of photographical spray images. It is found to depend on the Reynolds and the Ohnesorge number.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Rocket and propulsion systems research · Advanced Measurement and Detection Methods · Infrared Target Detection Methodologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.