journal article·2012

SIMULATION OF TWIN OVERLAPPING SPRAYS UNDERNEATH HYDRAULIC ATOMIZERS: INFLUENCE OF SPRAY HYDRODYNAMIC PARAMETERS

Hocine Mzad, Mohamed Elguerri

Atomization and Sprays· Volume 22· Issue 5
Publisher page

Abstract

The demand for improved product quality and increased productivity has focused attention on the need for more efficient systems of spray cooling during continuous casting. Optimizing the hydrodynamic parameters of the jet during nozzle design helps to obtain better dispersion and economy in water consumption. If multiple nozzles are used in a conveyorized application, the overlapping liquid distribution pattern of the nozzles needs to be considered because the process may depend strongly on the relative local volume flux of the spray. The disposition of nozzles that create overlapping jet zones results in dispersion profiles that depend on the experimental conditions. In order to understand the fluid behavior in the overlap region, the present paper suggests a hydrodynamic investigation using a program of simulation based on the experimental correlations of pulverized water jets. The influence of the hydrodynamic parameters by varying the water pressure ΔP between 0.2 and 0.9 MPa is highlighted, which gives a very wide operating range. In addition, other parameters such as the nozzle's orifice-to-surface distance, H, and the nozzle opening angle, θ, are highlighted.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Plant Surface Properties and Treatments · Fluid Dynamics and Heat Transfer · Aerosol Filtration and Electrostatic Precipitation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.