article·2009-01-01

SPRAY VELOCITY AND DROP SIZE MEASUREMENTS IN FLASHING CONDITIONS

Renaud Lecourt, P. Barricau, Johan Steelant

Publisher page

Abstract

Experiments were carried out to obtain spray drop velocity and size measurements when high-pressure fluid is injected into near-vacuum conditions typically observed downstream from rocket engine injectors and venting devices of the upper stages of spacecraft. Three different liquids representative for spacecraft propellants are investigated for injection at or near flashing conditions. Up to three typical injector geometries are evaluated at different pressure ratios and flow rates. The results show how flash atomization in vacuum conditions modifies the spray pattern, increases droplet velocities, and decreases their size compared with nonflashing conditions. From these results, several drop size and velocity correlations were established for the different injectors according to injection velocity and superheat level.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Electrohydrodynamics and Fluid Dynamics · Fluid Dynamics and Heat Transfer · Rocket and propulsion systems research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.