journal article·2001

DETAILED INVESTIGATION OF THE INFLUENCE OF FLUID VISCOSITY ON THE PERFORMANCE CHARACTERISTICS OF PLAIN-ORIFICE EFFERVESCENT ATOMIZERS

M. E. Ferreira, J. C. F. Teixeira, C. J. Bates, Phil J. Bowen

Atomization and Sprays· Volume 11· Issue 2
Publisher page

Abstract

Discharge coefficients, droplet diameters, and droplet velocities for plain-orifice effervescent atomizers are reported for a wide range of air/liquid (fuel oil) ratios. Liquid conditions comprise temperatures of 303 K (30 °C) and 353 K (80 °C) with corresponding kinematic viscosities of 200 and 24 mm2/s. Two different discharge orifices have been investigated with large length/diameter design ratios of 2.0 and 2.5. Two aerators have been employed with each discharge orifice; these combinations provide ratios of discharge orifice area to that of the total aerator injection boles which varied from 0.0267 up to 0.1157. The measured Sauter mean diameter variations with air-to-liquid ratio confirm the existence of a single "knee" in the profile for the two discharge orifices with length-to-diameter ratios of 2.0. The corresponding profiles for the two orifices with a length-to-diameter ratio of 2.5 show the existence of a double "knee." The results show that previously published correlations for the discharge coefficient are not universal and that, contrary to previous observations, the liquid viscosity does have a significant influence on both the quality of atomization and the detailed structure of the spray field.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Plant Surface Properties and Treatments · Fluid Dynamics and Heat Transfer · Electrohydrodynamics and Fluid Dynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.