journal article·2025

INSIGHTS INTO DIESEL SPRAY TRANSIENT PROCESS UNDER ULTRA-HIGH INJECTION PRESSURE AND HIGH AMBIENT DENSITY CONDITIONS

Chen An, Qian Xiong, Hongliang Luo, Beini Zhou, Yang Liu, Keiya Nishida, Long Liu

Atomization and Sprays· Volume 35· Issue 8
Publisher page

Abstract

Understanding the diesel spray dynamic development is crucial for modeling the injection process to optimize the design of ammonia-diesel dual-fuel engines. In this study, the effects of injection pressure up to an ultra-high value of 270 MPa, ambient density up to 70 kg/m3, and nozzle diameters of 0.12 and 0.181 mm on the spatiotemporal evolution of near-field spray are investigated using long-distance microscopic imaging. The nonevaporating spray images are analyzed using an in-house processing method. The analysis demonstrates that the intensity of the original images qualitatively describes the near-field spray process. In addition, the spray diffusion phenomenon is observed at the initial stage of the injection under all experimental conditions. Results show that the injector with a nozzle diameter of 0.181 mm exhibited a higher relative diffusion ratio and a smaller near-field angle compared with the 0.12 mm nozzle diameter due to poor atomization associated with the larger nozzle diameter. Furthermore, the times corresponding to when the spray reaches its maximum diffusion and stable state are extracted. Notably, an increase in ambient density and injection pressure reduces the maximum diffusion and stable state times of the spray. Finally, empirical correlations for predicting the spray near-field angle, maximum diffusion time, and stable state time are proposed. These correlations provide a foundation for quantitatively characterizing spray dynamics, which can be used to guide the optimization and design of fuel injection system.
Source: openalex_inverted_index · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Combustion Engine Technologies · Catalytic Processes in Materials Science · Electrohydrodynamics and Fluid Dynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. An, C., Liu, L., Luo, H., Zhou, B., Liu, Y., Li, X., and Keiya, N., Threshold Sensitivity Study on Spray- Spray Impingement under Flexible Injection Strategy for Fuel/Air Mixture Evaluation, Phys. Fluids, vol. 37, pp. 065124, 2025.10.1063/5.0268946 ↗
2. Benajes, J., Salvador, FJ., Carreres, M., and Jaramillo, D., On the Relation between the External Structure and the Internal Characteristics in the Near-Nozzle Field of Diesel Sprays, Proc. Inst. Mech. Eng. Part D-J. Automob. Eng., vol. 231, pp. 360-371, 2017.10.1177/0954407016639464 ↗
3. Bjorgen, K.O.P., Emberson, D.R., and Lovas, T., Combustion of Liquid Ammonia and Diesel in a Compression Ignition Engine Operated in High-Pressure Dual Fuel Mode, Fuel, vol. 360, pp. 130269, 2024.10.1016/j.fuel.2023.130269 ↗
4. Chen, Z., He, H., Wu, J., Wang, L., Lou, H., Zhao, P., Wang, T., Zhang, H., and Chen, H., An Experimental Study the Cross Spray and Combustion Characteristics Diesel and Ammonia in a Constant Volume Combustion Chamber, Energy, vol. 293, pp. 130733, 2024.10.1016/j.energy.2024.130733 ↗
5. Crua, C., Heikal, M.R., and Gold, M.R., Microscopic Imaging of the Initial Stage of Diesel Spray Formation, Fuel, vol. 157, pp. 140-150, 2015.10.1016/j.fuel.2015.04.041 ↗
6. Dimitriou, P. and Javaid, R., A Review of Ammonia as a Compression Ignition Engine Fuel, Int. J. Hydrog. Energy, vol. 45, pp. 7098-7118, 2020.10.1016/j.ijhydene.2019.12.209 ↗
7. Dong, P., Chen, S., Long, W., Dong, D., Wei, F., Wang, P., and Lu, M., Elucidating the Effect of Gasoline Jet Ignition on Ammonia Combustion Characteristics via Visualization Methods: A Fundamental Study, Energy, vol. 318, pp. 134699, 2025.10.1016/j.energy.2025.134699 ↗
8. Gao, Y., Huang, W., and Pratama, R.H., Influence of Hydraulic Flip on Spray Uniformity and Dynamics in Gasoline Direct Injection Nozzles, Int. J. Heat Mass Transf., vol. 242, pp. 126848, 2025.10.1016/j.ijheatmasstransfer.2025.126848 ↗
9. Giraldo, J.S., Payri, R., Marti-Aldaravi, P., and Montiel, T., Effect of High Injection Pressures and Ambient Gas Properties over the Macroscopic Characteristics of the Diesel Spray on Multi-Hole Nozzles, Atom. Sprays, vol. 28, pp. 1145-1160, 2018.10.1615/AtomizSpr.2019029651 ↗
10. Gonzalez, R.C., Woods, R.E., and Masters, B.R., Digital Image Processing, 3rd ed., J. Biomed. Opt, vol. 14, pp. 029901, 2009.10.1117/1.3115362 ↗
11. Jin, Y., Zhang, Y., Dong, P., Zhai, C., Nishida, K., Wang, Y., and Leng, X., Diesel Spray Characteristics of Multi-Hole Injectors under Geometrical Similarity Condition, Atom. Sprays, vol. 35, pp. 19-45, 2025.10.1615/AtomizSpr.2025053971 ↗
12. Li, H., Beji, T., and Verhelst, S., Improving the Calculation of Evaporating Sprays for Medium-Speed Marine-Engine-Like Conditions, Atom. Sprays, vol. 31, pp. 55-79, 2021.10.1615/AtomizSpr.2021037736 ↗
13. Liu, L., Peng, Y., Zhang, W., and Ma, X., Concept of Rapid and Controllable Combustion for High Power-Density Diesel Engines, Energy Conv. Manag., vol. 276, pp. 116529, 2023a.10.1016/j.enconman.2022.116529 ↗
14. Liu, L., Wu, J., Liu, H., Wu, Y., and Wang, Y., Study on Marine Engine Combustion and Emissions Characteristics under Multi-Parameter Coupling of Ammonia-Diesel Stratified Injection Mode, Int. J. Hydrog. Energy, vol. 48, pp. 9881-9894, 2023b.10.1016/j.ijhydene.2022.12.065 ↗
15. Liu, L., Wu, Y., Wang, Y., Wu, J., and Fu, S., Exploration of Environmentally Friendly Marine Power Technology-Ammonia/Diesel Stratified Injection, J. Clean Prod., vol. 380, pp. 135014, 2022.10.1016/j.jclepro.2022.135014 ↗
16. Liu, X., Yao, X., Wang, Z., and Tang, C., Single Hole Ammonia Spray Macroscopic and Microscopic Characteristics at Flare and Transition Flash Boiling Regions, Appl. Therm. Eng., vol. 235, pp. 121443, 2023.10.1016/j.applthermaleng.2023.121443 ↗
17. Manin, J., Bardi, M., Pickett, L.M., Dahms, R.N., and Oefelein, J.C., Microscopic Investigation of the Atomization and Mixing Processes of Diesel Sprays Injected into High Pressure and Temperature Environments, Fuel, vol. 134, pp. 531-543, 2014.10.1016/j.fuel.2014.05.060 ↗
18. Manin, J., Bardi, M., Pickett, L.M., and Payri, R., Boundary Condition and Fuel Composition Effects on Injection Processes of High-Pressure Sprays at the Microscopic Level, Int. J. Multiph. Flow, vol. 83, pp. 267-278, 2016.10.1016/j.ijmultiphaseflow.2015.12.001 ↗
19. Meijer, M., Somers, B., Johnson, J., Naber, J., Lee, S.Y., Malbec, L.M., Bruneaux, G., Pickett, L.M., Bardi, M., Payri, R., and Bazyn, T., Engine Combustion Network (ECN): Characterization and Comparison of Boundary Conditions for Different Combustion Vessels, Atom. Sprays, vol. 22, pp. 777-806, 2012.10.1615/AtomizSpr.2012006083 ↗
20. Niki, Y., Nitta, Y., Sekiguchi, H., and Hirata, K., Diesel Fuel Multiple Injection Effects on Emission Characteristics of Diesel Engine Mixed Ammonia Gas Into Intake Air, J. Eng. Gas. Turbines Power-Trans. ASME, vol. 141, pp. 061020, 2019.10.1115/1.4042507 ↗
21. Otsu, N., A Threshold Selection Method from Gray-Level Histograms, IEEE Trans. Syst. Man Cybern.: Syst. vol. 9, pp. 62-66, 2007.10.1109/TSMC.1979.4310076 ↗
22. Ruiz-Rodriguez, I., Pos, R., Megaritis, T., and Ganippa, LC., Investigation of Spray Angle Measurement Techniques, IEEE Access, vol. 7, pp. 22276-22289, 2019.10.1109/ACCESS.2019.2899214 ↗
23. Salvador, F.J., Gimeno, J., Carreres, M., and Crialesi-Esposito, M., Fuel Temperature Influence on the Performance of a Last Generation Common-Rail Diesel Ballistic Injector. Part I: Experimental Mass Flow Rate Measurements and Discussion, Energy Conv. Manag., vol. 114, pp. 364-375, 2016.10.1016/j.enconman.2016.02.042 ↗
24. Salvador, F.J., Gimeno, J., De la Morena, J., and González-Montero, L.A., Experimental Analysis of the Injection Pressure Effect on the Near-Field Structure of Liquid Fuel Sprays, Fuel, vol. 292, pp. 120296, 2021.10.1016/j.fuel.2021.120296 ↗
25. Subramani, A.K., Duraisamy, G., Govindan, N., and Hossain, A., An Innovative Method of Ammonia Use in a Light-Duty Automotive Diesel Engine to Enhance Diesel Combustion, Performance, and Emissions, Int. J. Hydrog. Energy, vol. 49, pp. 38-58, 2024.10.1016/j.ijhydene.2023.06.183 ↗
26. Valera-Medina, A., Xiao, H., Owen-Jones, M., David, W.I.F., and Bowen, P.J., Ammonia for Power, Prog. Energy Combust. Sci., vol. 69, pp. 63-102, 2018.10.1016/j.pecs.2018.07.001 ↗
27. Wang, B., Li, Y., Jiang, Y., Xu, H., and Zhang, X., Dynamic Spray Development of 2-Methylfuran Compared to Ethanol and Isooctane under Ultra-High Injection Pressure, Fuel, vol. 234, pp. 581-591, 2018.10.1016/j.fuel.2018.06.013 ↗
28. Wang, B., Wang, H., Hu, D., Yang, C., Duan, B., and Wang, Y., Effect of Different Ammonia Mixing Methods for Diesel Ignition on Combustion and Emission Performance of High Pressure Common Rail Engine, J. Energy Inst., vol. 111, pp. 101402, 2023.10.1016/j.joei.2023.101402 ↗
29. Wen, M., Liu, H., Cui, Y., Ming, Z., Feng, L., Wang, G., and Yao, M., Study on Combustion Stability and Flame Development of Ammonia/N-heptane Dual Fuel using Multiple Optical Diagnostics and Chemical Kinetic Analyses, J. Clean Prod., vol. 428, pp. 139412, 2023.10.1016/j.jclepro.2023.139412 ↗
30. Xu, L., Dong, P., Zhang, Z., Bu, J., Tian, J., Long, W., Liu, H., and Bai, X., Impact of Spray Interaction on Ammonia/Diesel Dual-Fuel Combustion and Emission under Engine Relevant Conditions, Proc. Combust. Inst., vol. 40, pp. 105751, 2024.10.1016/j.proci.2024.105751 ↗
31. Xu, L., Xu, S., Bai, X., Repo, J.A., Hautala, S., and Hyvönen, J., Performance and Emission Characteristics of an Ammonia/Diesel Dual-Fuel Marine Engine, Renew. Sust. Energ. Rev., vol. 185, pp. 113631, 2023.10.1016/j.rser.2023.113631 ↗
32. Zama, Y., Ochiai, W., Furuhata, T., and Arai, M., Experimental Study on Spray Angle and Velocity Distribution of Diesel Spray under High Ambient Pressure Conditions, Atom. Sprays, vol. 21, pp. 989-1007, 2011.10.1615/AtomizSpr.2012004722 ↗
33. Zhai, C., Jin, Y., Wu, Q., Nishida, K., and Ogata, Y., Diesel Spray of Multi-Hole Injectors with Micro-Hole under Ultra-High Injection Pressure-Evaporating Spray Characteristics, Atom. Sprays, vol. 32, pp. 49-72, 2022.10.1615/AtomizSpr.2021037966 ↗
34. Zhai, C., Liu, E., Zhang, G., Xing, W., Chang, F., Jin, Y., Luo, H., Nishida, K., and Ogata, Y., Similarity and Normalization Study of Fuel Spray and Combustion under Ultra-High Injection Pressure and Micro-Hole Diameter Conditions-Spray Characteristics, Energy, vol. 288, pp. 129684, 2024.10.1016/j.energy.2023.129684 ↗
35. Zhang, F., Zhang, G., Wang, Z., Wu, D., Jangi, M., and Xu, H., Experimental Investigation on Combustion and Emission Characteristics of Non-Premixed Ammonia/Hydrogen Flame, Int. J. Hydrog. Energy, vol. 61, pp. 25-38, 2024.10.1016/j.ijhydene.2024.02.281 ↗
36. Zheng, L., Mi, S., Li, H., Tan, X., Qian, Y., Feng, M., and Lu, X., Experimental Study on the Combustion and Emission Characteristics of Ammonia-Diesel Dual Fuel Engine under High Ammonia Energy Ratio Conditions, J. Energy Inst., vol. 114, pp. 101557, 2024.10.1016/j.joei.2024.101557 ↗