NUMERICAL STUDY ON FILM BREAKUP IN LIQUID-LIQUID PINTLE INJECTORS WITH DIFFERENT DOUBLE-ROW SLOT ARRANGEMENTS
Source abstract
Abstract
The film breakup process in liquid-liquid pintle injectors with double-row slots, with aligned slots or staggered slots, has been numerically studied and compared. The effects of slot arrangements and momentum ratios on breakup morphology, surface wave, breakup length, and spray angles are discussed in detail. The results show that the spray generated by aligned slots is a multicavity structure, and the spray by staggered slots can be described as a gear-like hollow conical structure. The surface wave on the liquid in the aligned-slot pintle is larger in magnitude than that in the staggered-slot pile. The phenomenon of the phase difference of surface waves on the adjacent spray fans can be observed in their intersection region with aligned slots. Increasing the momentum ratio promotes the surface waves on the film with aligned slots but weakens the intensity of disturbing waves with the staggered slots. The aligned-slot pintle forms a larger spray angle than the staggered-slot pintle. As the momentum ratio increases, the spray angle expands and the breakup length shortens for both slot arrangements. The atomization performance of the aligned-slot pintle is generally better than that of the staggered-slot pintle under the present simulation conditions. Film leakage occurs with the aligned slot arrangement, and it is less efficient to control the leakage rate by adjusting the radial mass flow rate.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Electrohydrodynamics and Fluid Dynamics · Cyclone Separators and Fluid Dynamics · Advanced Combustion Engine Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Austin, B.L., Heister, S.D., and Anderson, W.E., Characterization of Pintle Engine Performance for Nontoxic Hypergolic Bipropellants, J. Propuls. Power, vol. 21, no. 4, pp. 627-635, 2005.10.2514/1.7988 ↗
2. Cai, K., Zhang, Z., Wang, F., Hu, Y., Wang, X., Fang, Z., Mao, X., Yao, Z., Yu, Y., and Li, H., Simulation Analysis of the Effect of Slit/Slot Pintle Geometry on Atomization of Bipropellant Engine, Processes, vol. 11, no. 8, Article 2471, 2023. DOI: 10.3390/pr1108247110.3390/pr11082471 ↗
3. Chen, H., Li, Q., and Cheng, P., Experimental Research on the Spray Characteristics of Pintle Injector, Acta Astronaut., vol. 162, pp. 424-435, 2019.10.1016/j.actaastro.2019.06.032 ↗
4. Chen, H., Li, Q., Cheng, P., and Zhang, B., Experimental Research on Effects of Shape of Radial Orifice on Spray Characteristics of Pintle Injector, J. Propuls. Technol., vol. 43, no. 3, Article ID 200572, 2022 (in Chinese).
5. Cheng, P., The Dynamics of Spray Combustion in Variable Thrust Rocket Engines, PhD, National University of Defense Technology, 2018 (in Chinese).
6. Cheng, P., Li, Q., and Chen, H., Flow Characteristics of a Pintle Injector Element, Acta Astronaut., vol. 154, pp. 61-66, 2019.10.1016/j.actaastro.2018.10.020 ↗
7. Cheng, P., Li, Q., Xu, S., and Kang, Z., On the Prediction of Spray Angle of Liquid-Liquid Pintle Injectors, Acta Astronaut., vol. 138, pp. 145-151, 2017.10.1016/j.actaastro.2017.05.037 ↗
8. Erkal, B., Sumer, B., and Aksel, M., Design and Cold Flow Experiment Procedure of a Pintle Injector, AIAA Propulsion and Energy 2019 Forum, Indianapolis, IN, 2019.10.2514/6.2019-4117 ↗
9. Freeberg, J. and Hogge, J., Spray Cone Formation from Pintle-Type Injector Systems in Liquid Rocket Engines, AIAA Scitech 2019 Forum, San Diego, CA, 2019.10.2514/6.2019-0152 ↗
10. Heo, S., Hwan, K., Lee, S., and Yoon, Y., Study on Spray Angle of a Throttleable Pintle Injector According to Total Momentum Ratio Based on Hot Fire Test Conditions, J. ILASS-Korea, vol. 25, no. 3, pp. 126-131, 2020.
11. Heo, S., Jeong, J., and Yoon, Y., Spray Characteristics of a Multi-Slit Type Throttleable Pintle Injector with Different Slit Heights, Acta Astronaut., vol. 215, pp. 475-492, 2024.10.1016/j.actaastro.2023.12.023 ↗
12. Heo, S., Kim, D.H., and Yoon, Y., Effects of Groove Structure on Spray Characteristics of a Throttleable Pintle Injector, J. Propuls. Power, vol. 39, no. 1, pp. 38-49, 2023.10.2514/1.B38760 ↗
13. Kang, D., Han, S., Ryu, C., and Ko, Y., Design of Pintle Injector Using Kerosene-LOx as Propellant and Solving the Problem of Pintle Tip Thermal Damage in Hot Firing Test, Acta Astronaut., vol. 201, pp. 48-58, 2023.10.1016/j.actaastro.2022.08.029 ↗
14. Kim, D., Heo, S., Lee, S., and Yoon, Y., Parametric Study of Reverse Injection Applied in Gas-Liquid Pintle Injectors, AIAA Scitech 2021 Forum, Virtual, 2021.10.2514/6.2021-0415 ↗
15. Lee, I., Jeong, G., and Yoon, Y., Breakup Mode of Continuous-Type Liquid-Liquid Pintle Injector, Exp. Therm. Fluid Sci., vol. 149, Article 111013, 2023. DOI: 10.1016/j.expthermflusci.2023.11101310.1016/j.expthermflusci.2023.111013 ↗
16. Lee, I., Shim, D., Kim, I., and Yoon, Y., Effect of the Flow Passage Area Ratio on a Double Slit-Type Pintle Injector, Int. J. Aeronaut. Space Sci., vol. 25, pp. 540-554, 2024.10.1007/s42405-023-00683-4 ↗
17. Lee, K., Shin, D., Son, M., Moon, H., and Koo, J., Flow Visualization of Cryogenic Spray from a Movable Pintle Injector, J. Vis., vol. 22, pp. 773-781, 2019.10.1007/s12650-019-00548-7 ↗
18. Lee, S., Kim, D., Koo, J., and Yoon, Y., Spray Characteristics of a Pintle Injector Based on Annular Orifice Area, Acta Astronautica, vol. 167, pp. 201-211, 2020.10.1016/j.actaastro.2019.11.008 ↗
19. Lee, S., Koo, J., and Yoon, Y., Effects of Skip Distance on the Spray Characteristics of a Pintle Injector, Acta Astronaut., vol. 178, pp. 471-480, 2021.10.1016/j.actaastro.2020.09.043 ↗
20. Lucchese, L., Liberatori, J., Cavalieri, D., Simone, D., Liuzzi, D., Ciottoli, P.P., and Valorani, M., Pintle Injector Performance Sensitivity to the Radial Injection Arrangement, AIAA SCITECH 2024 Forum, Orlando, FL, 2024.10.2514/6.2024-1393 ↗
21. Nam, J., Lee, K., Park, S., Huh, H., and Koo, J., Spray Characteristics of a Movable Pintle Injector with Pintle Tip Shape, J. Korean Soc. Aeronaut. Space Sci., vol. 47, no. 9, pp. 658-664, 2019.10.5139/JKSAS.2019.47.9.658 ↗
22. Radhakrishnan, K., Son, M., Lee, K., and Koo, J., Effect of Injection Conditions on Mixing Performance of Pintle Injector for Liquid Rocket Engines, Acta Astronaut., vol. 150, pp. 105-116, 2018.10.1016/j.actaastro.2017.12.012 ↗
23. Ryu, H., Yu, I., Kim, W., Shin, D., Ko, Y., and Kim, S., Experimental Investigation on Combustion Performance of a Pintle Injector Engine with Double-Row Rectangular Slot, J. Korean Soc. Propuls. Eng., vol. 21, no. 3, pp. 25-33, 2017 (in Korean).10.6108/KSPE.2017.21.3.025 ↗
24. Son, M., Radhakrishnan, K., Koo, J., Kwon, O., and Kim, H., Design Procedure of a Movable Pintle Injector for Liquid Rocket Engines, J. Propuls. Power, vol. 33, no. 4, pp. 858-869, 2017.10.2514/1.B36301 ↗
25. Son, M., Yu, K., Koo, J., Kwon, O., and Kim, J., Effects of Momentum Ratio and Weber Number on Spray Half Angles of Liquid Controlled Pintle Injector, J. Therm. Sci., vol. 24, pp. 37-43, 2015.10.1007/s11630-015-0753-7 ↗
26. Song,W., Hwang, J., and Koo, J., Atomization of Gelled Kerosene by Multi-Hole Pintle Injector for Rocket Engines, Fuel, vol. 285, Article ID 119212, 2021. DOI: 10.1016/j.fuel.2020.11921210.1016/j.fuel.2020.119212 ↗
27. Tang, T., Jin, T., andWang, G., Numerical Simulations of Liquid Film Primary Breakup in a Pintle Injector: A Parametric Study, Atomization Sprays, vol. 34, no. 6, pp. 1-33, 2024.10.1615/AtomizSpr.2024051051 ↗
28. Wang, K., Lei, F., Yang, A., Yang, B., and Zhou, L., Numerical Simulation of Spray and Mixing Process of Impingement between Sheet and Jet in Pintle Injector Element, Acta Aeronaut. Astronaut. Sinica, vol. 41, no. 9, Article ID 123802, 2020a (in Chinese). DOI: 10.7527/S1000-6893.2020.23802
29. Wang, K., Lei, F., Yang, A., Yang, B., and Zhou, L., Prediction Model of Leakage Rate of Liquid Sheet in Pintle Injector, J. Aerospace Power, vol. 35, no. 10, pp. 2223-2234, 2020b (in Chinese).
30. Wang, K., Lei, F., Zhang, B., Yang, A., and Zhou, L., Analysis on Spray Angle Model for Pintle Injector Element, Acta Aeronaut. Astronaut. Sinica, vol. 41, no. 10, Article ID 123622, 2020c (in Chinese). DOI: 10.7527/S1000-6893.2019.23622
31. Wang, K., Tang, L., Lei, F., Yang, A., and Zhou, L., Numerical Simulation on Spray Field of Liquid-Liquid Pintle Multi-Injector Elements, J. Rocket Propuls., vol. 49, no. 2, pp. 15-26, 2023 (in Chinese).
32. Xie, Y., Zhang, J., Sun, M.,Wu, J., Li, P., An, B., Liang, C.,Wang, T., Cheng, P., Chen, J., Wang, J., and Li, M., Review on Spray Characteristics of Liquid-Liquid Injectors in Liquid Rocket Engines, Phys. Fluids, vol. 36, no. 9, Article ID 091302, 2024. DOI: 10.1063/5.022389410.1063/5.0223894 ↗
33. Zhang, B., Li, P., Yang, A., and Yang, B., Effects of Throttling Level on Spray Characteristics of Gas-Liquid Pintle Injector Unit, J. Aerospace Power, vol. 37, no. 4, pp. 791-801, 2022 (in Chinese).
34. Zhang, B., Wang, K., Li, P., and Yang, A., Effect of Radial Slots Layout on Spray Angle for Gas-Liquid Pintle Injector, J. Rocket Propuls., vol. 49, no. 6, pp. 1-9, 2023 (in Chinese).
35. Zhao, F., Zhang, H., Zhao, L., and Bai, B., A New Modeling Method for Spray Angle Prediction of Liquid-Liquid Pintle Injector, AIAA J., vol. 61, no. 11, pp. 4960-4975, 2023.10.2514/1.J063068 ↗
36. Zhao, F., Zhang, H., Zhao, L., and Bai, B., Effects of Flowing Status of Fluid Film and Jet on Spray Angle of Liquid-Liquid Pintle Injector, J. Propuls. Technol., vol. 46, no. 2, pp. 169-179, 2025 (in Chinese). DOI: 10.13675/j.cnki.tjjs.2312042
37. Zhou, R. and Shen, C., Experimental Study on the Spray Characteristics of a Pintle Injector Element, Acta Astronaut., vol. 194, pp. 255-262, 2022.10.1016/j.actaastro.2022.02.019 ↗
38. Zhou,W., Xu, X., Yang, Q., Zhao, R., and Jin, Y., Experimental and Numerical Investigations on the Spray Characteristics of Liquid-Gas Pintle Injector, Aerospace Sci. Technol., vol. 121, Article ID 107354, 2022. DOI: 10.1016/j.ast.2022.10735410.1016/j.ast.2022.107354 ↗