journal article·2025

EFFECTS OF TEMPERATURE AND INJECTOR STRUCTURE ON ATOMIZATION CHARACTERISTICS OF BIPROPELLANT: EXPERIMENTAL STUDY

Yuhao Zhou, Junqiang Ma, Guoxiu Li, Hongmeng Li, Rongpei Jiang

Atomization and Sprays· Volume 35· Issue 2
Publisher page

Abstract

In order to provide an efficient and reliable propellant injection system at a low-temperature environment for a bipropellant rocket engine, a liquid/liquid coaxial swirl jet spray experimental system was developed. The influence of different working medium temperatures on swirling atomization was studied. As the temperature of the working medium decreases, the spray cone angle and spray droplet size uniformity index decrease, and the Sauter mean diameter (SMD) and breaking length of the liquid film increase, indicating that low temperature is not conducive to the atomization of the working medium. This is because low temperature increases the viscosity of the working medium, thereby increasing flow resistance and resulting in a decrease in flow rate. The effects of different injector structures on atomization were studied. When the coaxial spray reaches the boundary mixing state, the two liquid films impinge at the outlet of the outer injector; atomization quality is better at this condition. Tangential orifices number of the outer injector and outer injector swirl chamber length-diameter ratio have a complex influence on atomization. Influences of structural parameters on atomization are essentially caused by the interaction between the inner and outer liquid films. When designing the injector structure, it is necessary to comprehensively consider various influencing factors and balance the spray cone angle, liquid film breaking length, SMD, and spray droplet size uniformity.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Electrohydrodynamics and Fluid Dynamics · Fluid Dynamics and Heat Transfer · Plant Surface Properties and Treatments

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Bai, X., Cheng, P., Sheng, L., Li, Q., Zhang, X., and Kang, Z., Effects of Backpressure on Self-Pulsation Characteristics of Liquid-Centered Swirl Coaxial Injectors, Int. J. Multiph. Flow, vol. 116, pp. 239-249, 2019.10.1016/j.ijmultiphaseflow.2019.04.017 ↗
2. Casiano, M.J., Hulka, J.R., and Yang, V., Liquid-Propellant Rocket Engine Throttling: A Comprehensive Review, J. Propuls. Power, vol. 26, no. 5, pp. 897-923, 2009.10.2514/1.49791 ↗
3. Fajgenbaum, R. and Santos, R.G.D., Influence of Fuel Temperature on Atomization Parameters in a Pressure-Swirl Atomizer from a Port Fuel Injector by Shadowgraphy Technique, J. Braz. Soc. Mech. Sci. Eng. vol. 38, no. 7, pp. 1877-1892, 2015.10.1007/s40430-015-0443-0 ↗
4. Fang, Y., Zhang, K., Ma, X., Sheng, A., Li, Y., Jiang, C., Xue, W., and Shuai, S., Microscopic Investigation and Local Standard Deviation Analysis of Liquid Propane Jets in Supercritical Environment, Fuel, vol. 369, no. 10, p. 131722, 2024.10.1016/j.fuel.2024.131722 ↗
5. Gangarapu, Y., Asadali, K., Pavuluri, L., and Kumar, D., Experimental Testing of Spray Characteristics of Swirler Injector without Guide Vanes in Liquid Propellant Rocket Engines, 10th SAE India Int. Mobility Conf., Bengaluru, India, 2022.10.4271/2022-28-0393 ↗
6. Gill, G.S. and Nurick, W.H., Liquid Rocket Engine Injectors, NASA Tech. Rep. NASA-SP-8089, 1976.
7. Inoue, C., Oishi, Y., Terauchi, Y., Yu Daimon, Y., Fujii, G., and Kawatsu, K. Direct Formulation and Quantitative Water-Flow Diagnostic for Bi-Propellant Thruster Performance, AIAA Propulsion and Energy 2020 Forum, Virtual, 2020.10.2514/6.2020-3820 ↗
8. Jeong, S. and Yoon, Y., Sheet-Breakup Characteristics of a Closed-Type Swirl Injector Considering Internal Flow Instability, Acta Astronaut., vol. 186, no. 4, pp. 363-371, 2021.10.1016/j.actaastro.2021.05.049 ↗
9. Kakami, A., Ishibashi, T., Ideta, K., and Tachibana, T., One-Newton Class Thruster Using Arc Discharge Assisted Combustion of Nitrous Oxide/Ethanol Bipropellant, Vacuum, vol. 110, pp. 172-176, 2014.10.1016/j.vacuum.2014.08.003 ↗
10. Kim, D., Han, P., Im, J.H., Yoon, H., and Bazarov, V.G., Effect of Recess on the Spray Characteristics of Liquid-Liquid Swirl Coaxial Injectors, J. Propuls. Power, vol. 23, no. 6, pp. 1194-1203, 2007.10.2514/1.30450 ↗
11. Kumar, A. and Sahu., S., Liquid Jet Disintegration Memory Effect on Downstream Spray Fluctuations in a Coaxial Twin-Fluid Injector, Phys. Fluids, vol. 32, no. 7, p. 073302, 2020.10.1063/5.0009188 ↗
12. Lamanna, G., Stotz, I., Weigand, B., and Steelant, J., High-Speed Visualisation of Liquid Jet Disintegration, Como Lake, Italy: European Liquid Atomisation and Spray Systems, 2008.
13. Liu, B., Jin, P., Cai, G., Ma Y., and Qi., Y., Experimental Study on Influence of Structural Parameters on Flow Field of Liquid-Liquid Coaxial Swirl Injector, 12th Int. Conf. on Mechanical and Aerospace Engineering, Athens, Greece, pp. 328-332, 2021.10.1109/ICMAE52228.2021.9522395 ↗
14. Liu, B., Jin, P., Ma, Y., Lv, J., and Cai, G., Experimental Study of the Effects of Weber Number and Recess Length on the Combustion Characteristics for Liquid-Liquid Swirl Coaxial Injector, Aerospace Sci. Technol., vol. 124, p. 107550, 2022.10.1016/j.ast.2022.107550 ↗
15. Liu, L.-H., Wang, H.-R., and Fu, Q.-F., Experimental Studies on the Unsteady Atomization Characteristics of a Swirl Injector, Acta Astronaut., vol. 194, no. 2, pp. 162-173, 2022.10.1016/j.actaastro.2022.02.005 ↗
16. Lord Rayleigh, On the Instability of Jets, Proc. London Math. Soc., vol. s1-10, no. 1, pp. 4-13, 1878.10.1112/plms/s1-10.1.4 ↗
17. Ma, X., Wang, S., Li, F., Zhang, H., Jiang, S., and Sui, M. Effect of Air Flow Rate and Temperature on the Atomization Characteristics of Biodiesel in Internal and External Flow Fields of the Pressure Swirl Injector, Energy, vol. 253, no. 3, pp. 112-124, 2022.10.1016/j.energy.2022.124112 ↗
18. Park, S.H., Kim, H.J., and Lee, C.S., Macroscopic Spray Characteristics and Breakup Performance of Dimethyl Ether (DME) Fuel at High Fuel Temperatures and Ambient Conditions, Fuel, vol. 89, no. 10, pp. 3001-3011, 2010.10.1016/j.fuel.2010.05.002 ↗
19. Rashid, M.S.F.M., Hamid, A.H.A., Sheng, O.C., and Ghaffar, Z.A., Effect of Inlet Slot Number on the Spray Cone Angle and Discharge Coefficient of Swirl Atomizer, Procedia Eng., vol. 41, 2012, pp. 1781-1786, 2012.10.1016/j.proeng.2012.07.383 ↗
20. Rastegarkoutenaei, A. and Ghassemi, H., Merging Conical Liquid Sheets from Coaxial Pressure-Swirl Injectors, Atomization Sprays, vol. 33, no. 12, pp. 39-60, 2023.10.1615/AtomizSpr.2023046701 ↗
21. Reddy, K.U. and Mishra, D.P., Studies on Spray Behavior of a Pressure Swirl Atomizer in Transition Regime, J. Propuls. Power, vol. 24, no. 1, pp. 74-80, 2012.10.2514/1.31156 ↗
22. Reitz, R.D., Atomization and other Breakup Regimes of a Liquid Jet, PhD, Princeton University, 1978.
23. Rizk, N.K. and Lefebvre, A.H., Internal Flow Characteristics of Simplex Swirl Atomizers, J. Propuls. Power, vol. 1, no. 3, pp. 193-199, 2012.10.2514/3.22780 ↗
24. Sakman, A.T., Jog, M.A., Jeng, S.M., and Benjamin M.A., Parametric Study of Simplex Fuel Injector Internal Flow and Performance, AIAA J., vol. 38, no. 7, pp. 1214-1218, 2000.10.2514/2.1090 ↗
25. Santolaya, J.L., Aisa, L.A., and Garcia, E., Experimental Study of Near Field Flow Structure in Hollow Cone Pressure Swirl Sprays, J. Propuls. Power, vol. 23, no. 2, pp. 382-389, 2012.10.2514/1.20713 ↗
26. Shafaee, M., Banitabaei, S.A., Ashjaee, M., and Esfahanian, V., Effect of Flow Conditions on Spray Cone Angle of a Two-Fluid Atomizer, J. Mech. Sci. Technol, vol. 25, no. 2, pp. 365-369, 2011.10.1007/s12206-010-1215-5 ↗
27. Sivakumar, D. and Raghunandan, B.N., Jet Interaction in Liquid-Liquid Coaxial Injectors, J. Fluids Eng., vol. 118, no. 2, pp. 329-334, 1996.10.1115/1.2817381 ↗
28. Soni, S.K. and Kolhe, P.S., Liquid Jet Breakup and Spray Formation with Annular Swirl Air, Int. J. Multiphase Flow, vol. 134, p. 103474, 2021.10.1016/j.ijmultiphaseflow.2020.103474 ↗
29. Vijay, G.A., Moorthi, N.S.V., and Manivannan, A., Internal and External Flow Characteristics of Swirl Atomizers: A Review, Atomization Sprays, vol. 25, no. 2, pp. 153-188, 2015.10.1615/AtomizSpr.2014010219 ↗
30. Wang, X.F. and Lefebvre, A.H., Influence of Fuel Temperature on Atomization Performance of Pressure-Swirl Atomizers, J. Propuls. Power, vol. 4, no. 3, pp. 222-227, 1988.10.2514/3.23052 ↗
31. Weber, C., Disintegration of Liquid Jets, Z. Angew. Math. Mech., vol. 11, no. 2, pp. 136-159, 1931.10.1002/zamm.19310110207 ↗
32. Yang, L.J., Fu, Q.F., Qu, Y.Y., Zhang, W., Du, M.L., and Xu, B.R., Spray Characteristics of Gelled Propellants in Swirl Injectors, Fuel, vol. 97, pp. 253-261, 2012.10.1016/j.fuel.2012.02.036 ↗