DIRECT NUMERICAL SIMULATION AND ANALYSIS OF PERTURBATION EFFECTS ON SWIRLING LIQUID SHEET
Source abstract
Abstract
The present study investigates the primary atomization of a swirling liquid sheet under both unperturbed conditions and perturbed conditions with frequencies ranging from f = 0 to 1500 kHz (St = 0 to 5). A direct numerical simulation based on the volume-of-fluid (VoF) interface-capturing method was employed. By applying different perturbation frequencies at the nozzle exit, this study analyzes the overall spray structure, the evolution of surface waves, and the formation of ligaments and droplets. The spray patterns, surface wave morphology, and droplet size distributions of the swirling liquid sheet under various perturbation frequencies are compared. To be more specific, the breakup patterns of an unperturbed liquid sheet include mushroom-like and surface wave breakups. Initially, the swirling liquid sheet collides with stationary air, forming ring and ribbon-shaped ligaments. Later, surface waves detach periodically, with wavelengths comparable to the sheet thickness. Surface structure breakup is governed by a sinusoidal mode, leading to the formation of wave-cone and perforated-cone structures. As the nozzle perturbation frequency (Strouhal number, St) increases, the breakup length initially decreases and then increases. The volume fraction of disintegrated liquid exhibits nearly the opposite trend. At St = 0.22, large-wavelength surface waves form periodic mushroom-like structures, leading to strong interaction with the surrounding gas. At St = 1, 2, surface wave evolution promotes uniform velocity and slows atomization. At higher St = 5, breakup characteristics resemble those of unperturbed conditions. The spray field's spatial distribution varies with perturbation frequency. At St = 0.22, the spray field is approximately circular with a narrower radial diffusion range compared to a conical spray. This work provides guidance for controlling combustion instability and modeling the atomization process in real engine nozzles.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Fluid Dynamics and Heat Transfer · Cyclone Separators and Fluid Dynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Bell, J.B., Colella, P., and Glaz, H.M., A Second-Order Projection Method for the Incompressible Navier-Stokes Equations, J. Comput. Phys., vol. 85, no. 2, pp. 257-283, 1989.10.1016/0021-9991(89)90151-4 ↗
2. Cheng, P., Li, Q., Kang, Z., and Chen, H., Response of Inner Flow and Spray Characteristics of a Pressure Swirl Injector to Pressure Oscillation in Supply System, Acta Astronaut., vol. 154, pp. 82-91, 2018.10.1016/j.actaastro.2018.10.001 ↗
3. Crank, J. and Nicolson, P., A Practical Method for Numerical Evaluation of Solutions of Partial Differential Equations of the Heat-Conduction Type, Math. Proc. Cambridge Phil. Soc., vol. 43, no. 1, pp. 50-67, 1947.10.1017/S0305004100023197 ↗
4. Dumouchel, C., On the Experimental Investigation on Primary Atomization of Liquid Streams, Exp. Fluids, vol. 45, pp. 371-422, 2008.10.1007/s00348-008-0526-0 ↗
5. Fu, Q.F., Yang, L.J., Qu, Y.Y., and Gu, B., Linear Stability Analysis of a Conical Liquid Sheet, J. Propuls. Power, vol. 26, no. 5, pp. 955-968, 2010.10.2514/1.48346 ↗
6. Ghorbanian, K., Ashjaee, M., Soltani, M., Mesbahi, M., and Morad, M., Experimental Flow Visualization of Single Swirl Spray Pattern at Various Pressure Drops, in 39th AIAA/ASME/SAE/ASEE Joint Propulsion Conf. and Exhibit, Huntsville, AL, 2023.
7. Ibrahim, A.A. and Jog, M.A., Nonlinear Breakup Model for a Liquid Sheet Emanating from a Pressure-Swirl Atomizer, J. Eng. Gas Turbines Power, vol. 129, no. 4, pp. 945-953, 2007.10.1115/1.2747263 ↗
8. Jeandel, X. and Dumouchel, C., Influence of the Viscosity on the Linear Stability of an Annular Liquid Sheet, Int. J. Heat Fluid Flow, vol. 20, no. 5, pp. 499-506, 1999.10.1016/S0142-727X(99)00038-7 ↗
9. Ramamurthi, K. and Tharakan, T.J., Flow Transition in Swirled Liquid Sheets, AIAA J., vol. 36, no. 3, pp. 420-427, 1998.10.2514/2.380 ↗
10. Kang, Z., The Unsteady Atomization Mechanism and Combustion Characteristics of Gas-Liquid Swirl Coaxial Injector, PhD, National University of Defense Technology, 2016.
11. Lefebvre, A. and Mcdonell, V., Atomization and Sprays, 2nd ed., Boca Raton, FL: CRC Press, 2017.10.1201/9781315120911 ↗
12. Lefebvre, A.H., Atomization and Sprays, Boca Raton, FL: CRC Press, 1988.10.1201/9781482227857 ↗
13. Najafi, S., Mikaniki, P., and Ghassemi, H., Numerical Simulation of Heavy Fuel Oil Atomization Using a Pulsed Pressure-Swirl Injector, Chin. J. Chem. Eng., vol. 32, pp. 61-69, 2021.10.1016/j.cjche.2020.07.053 ↗
14. Pia, A.D., Chiatto, M., and de Luca, L., Receptivity to Forcing Disturbances in Subcritical Liquid Sheet Flows, Phys. Fluids, vol. 33, Article 032113, 2021.10.1063/5.0044322 ↗
15. Popinet, S., Gerris: A Tree-Based Adaptive Solver for the Incompressible Euler Equations in Complex Geometries, J. Comput. Phys., vol. 190, no. 2, pp. 572-600, 2003.10.1016/S0021-9991(03)00298-5 ↗
16. Popinet, S., An Accurate Adaptive Solver for Surface-Tension-Driven Interfacial Flows, J. Comput. Phys., vol. 228, no. 16, pp. 5838-5866, 2009.10.1016/j.jcp.2009.04.042 ↗
17. Prakash, R., Gadgil, H., and Raghunandan, B.N., Breakup Processes of Pressure Swirl Spray in Gaseous Cross-Flow, Int. J. Multiphase Flow, vol. 66, pp. 79-91, 2014.10.1016/j.ijmultiphaseflow.2014.07.002 ↗
18. Scardovelli, R. and Zaleski, S., Direct Numerical Simulation of Free-Surface and Interfacial Flow, Annual Rev. Fluid Mech., vol. 31, pp. 567-603, 1999.10.1146/annurev.fluid.31.1.567 ↗
19. Schmidt, D.P., Nouar, I., Senecal, P.K., Rutland, C.J., Martin, J.K., Reitz, R., and Hoffman, J.A., Pressure-Swirl Atomization in the Near Field, SAE Trans., vol. 108, pp. 105-118, 1999.10.4271/1999-01-0496 ↗
20. Schmidt, S. and Oberleithner, K., Instability of Forced Planar Liquid Jets: Mean Field Analysis and Nonlinear Simulation, J. Fluid Mech., vol. 883, Article A7, 2020.10.1017/jfm.2019.855 ↗
21. Senecal, P.K., Schmidt, D.P., Nouar, I., Rutland, C.J., Reitz, R., and Corradini, M.L., Modeling High-Speed Viscous Liquid Sheet Atomization, Int. J. Multiphase Flow, vol. 25, pp. 1073-1097, 1999.10.1016/S0301-9322(99)00057-9 ↗
22. Shinjo, J. and Umemura, A., Simulation of Liquid Jet Primary Breakup: Dynamics of Ligament and Droplet Formation, Int. J. Multiphase Flow, vol. 36, no. 7, pp. 513-532, 2010.10.1016/j.ijmultiphaseflow.2010.03.008 ↗
23. Shinjo, J. and Umemura, A., Detailed Simulation of Primary Atomization Mechanisms in Diesel Jet Sprays (Isolated Identification of Liquid Jet Tip Effects), Proc. Combust. Inst., vol. 33, no. 2, pp. 2089-2097, 2011.10.1016/j.proci.2010.07.006 ↗
24. Sirignano,W. and Mehring, C., Review of Theory of Distortion and Disintegration of Liquid Streams, Prog. Energy Combust. Sci., vol. 26, no. 4, pp. 609-655, 2000.10.1016/S0360-1285(00)00014-9 ↗
25. Yang, A., Yang, S., Xu, Y., and Li, L., Periodic Atomization Characteristics of Simplex Swirl Injector Induced by Klystron Effect, Chin. J. Aeronaut., vol. 31, pp. 1066-1074, 2018.10.1016/j.cja.2018.02.016 ↗
26. Yang, X. and Turan, A., Simulation of Liquid Jet Atomization Coupled with Forced Perturbation, Phys. Fluids, vol. 29, no. 2, Article 022103, 2017.10.1063/1.4976621 ↗
27. Zandian, A., Sirignano, W.A., and Hussain, F., Planar Liquid Jet: Early Deformation and Atomization Cascades, Phys. Fluids, vol. 29, no. 6, Article 062109, 2017.10.1063/1.4986790 ↗
28. Zandian, A., Sirignano, W.A., and Hussain, F., Understanding Liquid-Jet Atomization Cascades via Vortex Dynamics, J. Fluid Mech., vol. 843, pp. 293-354, 2018.10.1017/jfm.2018.113 ↗
29. Zhou, C., Zou, J., and Zhang, Y., Effect of Streamwise Perturbation Frequency on Formation Mechanism of Ligament and Droplet in Liquid Circular Jet, Aerospace, vol. 9, Article 191, 2022.10.3390/aerospace9040191 ↗