journal article·2025

NEAR-FIELD SPRAY TIP CHARACTERISTICS OF ISO-OCTANE/DIETHYL ETHER BLENDS AS PROMISING GCI FUELS

Xiaoxin Yao, Ze Wang, Xiao Liu, Zuohua Huang, Chung K. Law, Chenglong Tang

Atomization and Sprays· Volume 35· Issue 2
Publisher page

Abstract

Effects of bio-fuel diethyl ether (DEE) addition on the near-field spray tip characteristics of iso-octane have been investigated at different ambient temperatures experimentally by using high-speed imaging with a long-distance microscope. The near-field spray screening is focused on the early stage of ∼0.2 ms after starting the injection and the measuring length scale is less than 3.0 mm below the nozzle exit. Results show that, first, the DEE blending ratio and ambient temperature significantly affect the state of the previous injection residual fuel, which leads to four typical near-field spray tip patterns: mushroom, umbrella, helmet, and vapor hemisphere, as the liquid phase residual fuel is vaporized. Second, quantitative description of the near-field spray tip has been conducted. High ambient temperature and DEE blending ratio favor faster tip penetration because of the enhanced residual fuel vaporization and reduced axial obstruction. Finally, different near-field spray tip patterns resulting from the residual fuel state are shown as function of the ambient temperature and DEE blending ratio, followed by a conceptual scheme regarding the state of the residual fuel and its evolution after the start of injection, at different ambient temperatures and DEE blending ratios.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Battery Technologies Research · Catalytic Processes in Materials Science · Fiber-reinforced polymer composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (62)

Show source-provided references
1. Agarwal, A.K., Prashumn, Valera, H., and Mustafi, N.N., Di-Ethyl Ether-Diesel Blends Fuelled Off-Road Tractor Engine: Part-II: Unregulated and Particulate Emission Characteristics, Fuel, vol. 308, p. 121973, 2022.10.1016/j.fuel.2021.121973 ↗
2. Ahmad, S., Jafry, A.T., Haq, M.U., Abbas, N., Ajab, H., Hussain, A., and Sajjad, U., Performance and Emission Characteristics of Second-Generation Biodiesel with Oxygenated Additives, Energies, vol. 16, no. 13, p. 5153, 2023.10.3390/en16135153 ↗
3. Bailey, B., Eberhardt, J., Goguen, S., and Erwin, J., Diethyl Ether (DEE) as a Renewable Diesel Fuel, SAE Tech. Rep. 972978, 1997.10.4271/972978 ↗
4. Barik, D. and Murugan, S., Effects of Diethyl Ether (DEE) Injection on Combustion Performance and Emission Characteristics of Karanja Methyl Ester (KME)-Biogas Fueled Dual Fuel Diesel Engine, Fuel, vol. 164, pp. 286-296, 2016.10.1016/j.fuel.2015.09.094 ↗
5. Crua, C., Shoba, T., Heikal, M., Gold, M., and Higham, C., High-Speed Microscopic Imaging of the Initial Stage of Diesel Spray Formation and Primary Breakup, SAE Tech. Rep. 2010-01-2247, 2010.10.4271/2010-01-2247 ↗
6. Dai, X.Y., Wang, Z.M., Liu, F.S., Lee, C.F., Sun, Q.B., and Li, Y.F., The Effect of Bubbles on Primary Breakup of Diesel Spray, Fuel, vol. 263, p. 116664, 2020a.10.1016/j.fuel.2019.116664 ↗
7. Dai, X.Y., Wang, Z.M., Liu, F.S., Pei, Y.Q., Gong, C., and Li, Z.S., The Effect of Nozzle Structure and Initial State on the Primary Breakup of Diesel Spray, Fuel, vol. 280, p. 118640, 2020b.10.1016/j.fuel.2020.118640 ↗
8. Ding, H.C., Wang, Z.M., Li, Y.F., Xu, H.M., and Zuo, C.J., Initial Dynamic Development of Fuel Spray Analyzed by Ultra High Speed Imaging, Fuel, vol. 169, pp. 99-110, 2016.10.1016/j.fuel.2015.11.083 ↗
9. Ghiji, M., Goldsworthy, L., Garaniya, V., Brandner, P.A., Hield, P., Novozhilov, V., Moinuddin, K., and Joseph, P., Effect of Residual Air Bubbles on Diesel Spray Structure at the Start of Injection, Fuel, vol. 241, pp. 25-32, 2019.10.1016/j.fuel.2018.12.013 ↗
10. Goyal, H., Kook, S., and Ikeda, Y., The Influence of Fuel Ignition Quality and First Injection Proportion on Gasoline Compression Ignition (GCI) Combustion in a Small-Bore Engine, Fuel, vol. 235, pp. 1207-1215, 2019.10.1016/j.fuel.2018.08.090 ↗
11. Guo, G., He, Z., Wang, Q., Sun, S., and Chen, Z., Effects of the Residual/Sucked Air Bubbles on Diesel Near-Nozzle Spray Structure, SAE Tech. Rep. 2017-01-2314, 2017.10.4271/2017-01-2314 ↗
12. Hu, Y.L., Wang, Z.M., Wang, C.M., Dai, X.Y., Li, Z.S., Liu, F.S., and Lee, C.F., Real-Time Evolution of Nozzle Internal Flow and Spray Breakup Under High Fuel Temperature and High Ambient Pressure, Atomization Sprays, vol. 31, no, 12, pp. 1-19, 2021.10.1615/AtomizSpr.2021036334 ↗
13. Hua, Y., Ethers and Esters as Alternative Fuels for Internal Combustion Engine: A Review, Int. J. Engine Res., vol. 24, no. 1, pp. 178-216, 2023.10.1177/14680874211046480 ↗
14. Issayev, G., Sarathy, S.M., and Farooq, S.A., Autoignition of Diethyl Ether and a Diethyl Ether/Ethanol Blend, Fuel, vol. 279, p. 118553, 2020.10.1016/j.fuel.2020.118553 ↗
15. Jamil, M.K., Usman, M., Hanif, A., Nawaz, H., Fouad, Y., Saleem, M.W., Abbas, N., Sajjad, U., and Hamid, K., Multi-Objective RSM-Based Optimization of Diesel-Diethyl Ether Blends in Diesel Engine to Achieve Sustainable Development Goals, Case Stud. Therm. Eng., vol. 59, p. 104542, 2024.10.1016/j.csite.2024.104542 ↗
16. Jing, D.L., Zhang, F., Li, Y.F., Xu, H.M., and Shuai, S.J., Experimental Investigation on the Macroscopic and Microscopic Spray Characteristics of Dieseline Fuel, Fuel, vol. 199, pp. 478-487, 2017.10.1016/j.fuel.2017.02.055 ↗
17. Kalghatgi, G.T., Risberg, P., and Angstrom, H.-E., Advantages of Fuels with High Resistance to Auto-Ignition in Late-Injection, Low-Temperature, Compression Ignition Combustion, SAE Tech. Rep. 2006-01-3385, 2006.10.4271/2006-01-3385 ↗
18. Kalghatgi, G.T., Risberg, P., and Angstrom, H.-E., Partially Pre-Mixed Auto-Ignition of Gasoline to Attain Low Smoke and Low NOx at High Load in a Compression Ignition Engine and Comparison with a Diesel Fuel, SAE Tech. Rep. 2007-01-0006, 2007.10.4271/2007-01-0006 ↗
19. Kapilan, N., Mohanan, P., and Reddy, R.P., Performance and Emission Studies of Diesel Engine using Diethyl Ether as Oxygenated Fuel Additive, SAE Tech. Rep. 2008-01-2466, 2008.10.4271/2008-01-2466 ↗
20. Karabektas, M., Ergen, G., and Hosoz, M., The Effects of Using Diethylether as Additive on the Performance and Emissions of a Diesel Engine Fuelled with CNG, Fuel, vol. 115, pp. 855-860, 2014.10.1016/j.fuel.2012.12.062 ↗
21. Kavuri, C., Paz, J., and Kokjohn, S.L., A Comparison of Reactivity Controlled Compression Ignition (RCCI) and Gasoline Compression Ignition (GCI) Strategies at High Load, Low Speed Conditions, Energy Convers. Manag., vol. 127, pp. 324-341, 2016.10.1016/j.enconman.2016.09.026 ↗
22. Kito-Borsa, T., Pacas, D.A., Selim, S., and Cowley, S.W., Properties of an Ethanol Diethyl Ether Water Fuel Mixture for Cold-Start Assistance of an Ethanol-Fueled Vehicle, Ind. Eng. Chem. Res., vol. 37, no. 8, pp. 3366-3374, 1998.10.1021/ie970171l ↗
23. Kokjohn, S.L., Hanson, R.M., Splitter, D.A., and Reitz, R.D., Experiments and Modeling of Dual-Fuel HCCI and PCCI Combustion Using In-Cylinder Fuel Blending, SAE Int. J. Engines, vol. 2, no. 2, pp. 24-39, 2009.10.4271/2009-01-2647 ↗
24. Lee, S. and Kim, T.Y., Performance and Emission Characteristics of a Di Diesel Engine Operated with Diesel/DEE Blended Fuel, Appl. Therm. Eng., vol. 121, pp. 454-461, 2017.10.1016/j.applthermaleng.2017.04.112 ↗
25. Lu, X. C., Han, D., and Huang, Z., Fuel Design and Management for the Control of Advanced Compression-Ignition Combustion Modes, Prog. Energy Combust. Sci., vol. 37, no. 6, pp. 741-783, 2011.10.1016/j.pecs.2011.03.003 ↗
26. Ma, Z.H., Lv, E.Y., Liu, C., and Li, Y.A., Study on Ether Spray Combustion and Its Products Under Sub- and Super-Critical Environments, Fuel, vol. 275, p. 117912, 2020.10.1016/j.fuel.2020.117912 ↗
27. Manente, V., Johansson, B., and Tunestal, P., Partially Premixed Combustion at High Load Using Gasoline and Ethanol, a Comparison with Diesel, SAE Tech. Rep. 2009-01-0944, 2009.10.4271/2009-01-0944 ↗
28. Manente, V., Johansson, B., Tunestal, P., and Cannella, W.J., Influence of Inlet Pressure, EGR, Combustion Phasing, Speed and Pilot Ratio on High Load Gasoline Partially Premixed Combustion, SAE Tech. Rep. 2010-01-1471, 2010a.10.4271/2010-01-1471 ↗
29. Manente, V., Tunestal, P., Johansson, B., and Cannella, W.J., Effects of Ethanol and Different Type of Gasoline Fuels on Partially Premixed Combustion from Low to High Load, SAE Tech. Rep. 2010-01-0871, 2010b.10.4271/2010-01-0871 ↗
30. Mohan, B., Yang, W.M., Yu, W.B., and Tay, K.L., Numerical Analysis of Spray Characteristics of Dimethyl Ether and Diethyl Ether Fuel, Appl. Energy, vol. 185, pp. 1403-1410, 2017.10.1016/j.apenergy.2016.01.128 ↗
31. Mohebbi, M., Reyhanian, M., Hosseini, V., Said, M.F.M., and Aziz, A.A., The Effect of Diethyl Ether Addition on Performance and Emission of a Reactivity Controlled Compression Ignition Engine Fueled with Ethanol and Diesel, Energy Convers. Manag., vol. 174, pp. 779-792, 2018.10.1016/j.enconman.2018.08.091 ↗
32. Musculus, M.P.B., Miles, P.C., and Pickett, L.M., Conceptual Models for Partially Premixed Low-Temperature Diesel Combustion, Prog. Energy Combust. Sci., vol. 39, nos. 2-3, pp. 246-283, 2013.10.1016/j.pecs.2012.09.001 ↗
33. National Institutes of Standards and Technology, NIST Chemistry WebBook, accessed from https://webbook.nist.gov/chemistry/, 2023.
34. Park, J., Kim, D., and Park, S., Effects of Nozzle L/D on Near-Field Development and Macroscopic Spray Characteristics of Common-Rail Diesel Sprays, Int. J. Automot. Technol., vol. 21, no. 3, pp. 657-666, 2020.10.1007/s12239-020-0063-2 ↗
35. Patil, K.R. and Thipse, S.S., Experimental Investigation of CI Engine Combustion, Performance and Emissions in DEE-Kerosene-Diesel Blends of High DEE Concentration, Energy Convers. Manag., vol. 89, pp. 396-408, 2015.10.1016/j.enconman.2014.10.022 ↗
36. Patil, K.R., Thipse, S.S. and Warke, A., Effect of Oxygenate and Cetane Improver on Performance and Emissions of Diesel Engine Fuelled with Diethyl Ether-Diesel Blends, SAE Tech. Rep. 2015-26-0057, 2015.
37. Reitz, R.D. and Duraisamy, G., Review of High Efficiency and Clean Reactivity Controlled Compression Ignition (RCCI) Combustion in Internal Combustion Engines, Prog. Energy Combust. Sci., vol. 46, pp. 12-71, 2015.10.1016/j.pecs.2014.05.003 ↗
38. Roberts, J., Chuahy, F.D.F., Kokjohn, S.L., and Roy, S., Isolation of the Parametric Effects of Pre-Blended Fuel on Low Load Gasoline Compression Ignition (GCI), Fuel, vol. 237, pp. 522-535, 2019.10.1016/j.fuel.2018.09.150 ↗
39. Roy, M.M., Calder, J., Wang, W., Mangad, A., and Diniz, F.C.M., Cold Start Idle Emissions from a Modern Tier-4 Turbo-Charged Diesel Engine Fueled with Diesel-Biodiesel, Diesel-Biodiesel-Ethanol, and Diesel-Biodiesel-Diethyl Ether Blends, Appl. Energy, vol. 180, pp. 52-65, 2016.10.1016/j.apenergy.2016.07.090 ↗
40. Sakai, Y., Herzler, J., Werler, M., Schulz, C., and Fikri, M., A Quantum Chemical and Kinetics Modeling Study on the Autoignition Mechanism of Diethyl Ether, Proc. Combust. Inst., vol. 36, no. 1, pp. 195-202, 2017.10.1016/j.proci.2016.06.037 ↗
41. Saravanan, N., Nagarajan, G., Sanjay, G., Dhanasekaran, C., and Kalaiselvan, K.M., Combustion Analysis on a DI Diesel Engine with Hydrogen in Dual Fuel Mode, Fuel, vol. 87, nos. 17-18, pp. 3591-3599, 2008.10.1016/j.fuel.2008.07.011 ↗
42. Sezer, I., Thermodynamic, Performance and Emission Investigation of a Diesel Engine Running on Dimethyl Ether and Diethyl Ether, Int. J. Therm. Sci., vol. 50, no. 8, pp. 1594-1603, 2011.10.1016/j.ijthermalsci.2011.03.021 ↗
43. Sezer, I., A Review Study on the Using of Diethyl Ether in Diesel Engines: Effects on Fuel Properties and Engine Performance, Energy Technol., vol. 6, no. 11, pp. 2084-2114, 2018.10.1002/ente.201800158 ↗
44. Sonawane, U., Jena, A., and Agarwal, A.K., Influence of Fuel Injection Pressure on Spray Characteristics of Diesel-Diethyl Ether Blends for Diesel Engine Applications: An Experimental Study, SAE Tech. Rep. 2023-01-0309, 2023.10.4271/2023-01-0309 ↗
45. Splitter, D., Wissink, M., DelVescovo, D., and Reitz, R.D., RCCI Engine Operation Towards 60% Thermal Efficiency, SAE Tech. Rep. 2013-01-0279, 2013.10.4271/2013-01-0279 ↗
46. Tahmasebi, E., Lucchini, T., D’Errico, G., Onorati, A., and Hardy, G., An Investigation of the Validity of a Homogeneous Equilibrium Model for Different Diesel Injector Nozzles and Flow Conditions, Energy Convers. Manag., vol. 154, pp. 46-55, 2017.10.1016/j.enconman.2017.10.049 ↗
47. Tang, Z.G., Zhang, L., Chen, X., and Tang, G.Z., Improved Kinetic Mechanism for Diethyl Ether Oxidation with a Reduced Model, Energy Fuel, vol. 31, no. 3, pp. 2803-2813, 2017.10.1021/acs.energyfuels.6b02010 ↗
48. Turner, D., Tian, G., Xu, H., Wyszynski, M.L., and Theodoridis, E., An Experimental Study of Dieseline Combustion in a Direct Injection Engine, SAE Tech. Rep. 2009-01-1101, 2009.10.4271/2009-01-1101 ↗
49. Venu, H. and Madhavan, V., Influence of Diethyl Ether (DEE) Addition in Ethanol-Biodiesel-Diesel (EBD) and Methanol-Biodiesel-Diesel (MBD) Blends in a Diesel Engine, Fuel, vol. 189, pp. 377-390, 2017.10.1016/j.fuel.2016.10.101 ↗
50. Wang, B., Li, Y.F., Jiang, Y.Z., Xu, H.M., and Zhang, X.Y., Dynamic Spray Development of 2-Methylfuran Compared to Ethanol and Isooctane under Ultra-High Injection Pressure, Fuel, vol. 234, pp. 581-591, 2018.10.1016/j.fuel.2018.06.013 ↗
51. Wang, H., Zhao, X.M., Tong, L.H., and Yao, M.F., The Effects of DI Fuel Properties on the Combustion and Emissions Characteristics of RCCI Combustion, Fuel, vol. 227, pp. 457-468, 2018.10.1016/j.fuel.2018.04.025 ↗
52. Wang, Z.M., Dai, X.Y., Liu, F.S., Li, Y.F., Wu, H., Wang, C.M., and Li, Y.K., Microscopic Study on the Mechanisms for Formation of the Initial Spray Morphology, Fuel, vol. 235, pp. 715-722, 2019.10.1016/j.fuel.2018.08.069 ↗
53. Wang, Z.M., Ding, H.C., Ma, X., Xu, H.M., and Wyszynski, M.L., Ultra-High Speed Imaging Study of the Diesel Spray Close to the Injector Tip at the Initial Opening Stage with Single Injection, Appl. Energy, vol. 165, pp. 335-344, 2016a.10.1016/j.apenergy.2015.12.046 ↗
54. Wang, Z.M., Ding, H.C., Ma, X., Xu, H.M., and Wyszynski, M.L., Ultra-High Speed Imaging Study of the Diesel Spray Close to the Injector Tip at the Initial Opening Stage with Split Injection, Appl. Energy, vol. 163, pp. 105-117, 2016b.10.1016/j.apenergy.2015.10.155 ↗
55. Wang, Z.M., Li, Y.F., Wang, C.M., Xu, H.M., and Wyszynski, M.L., Experimental Study on Primary Breakup of Diesel Spray under Cold Start Conditions, Fuel, vol. 183, pp. 617-626, 2016c.10.1016/j.fuel.2016.06.067 ↗
56. Werler, M., Cancino, L.R., Schiessl, R., Maas, U., Schulz, C., and Fikri, M., Ignition Delay Times of Diethyl Ether Measured in a High-Pressure Shock Tube and a Rapid Compression Machine, Proc. Combust. Inst., vol. 35, pp. 259-266, 2015.10.1016/j.proci.2014.06.143 ↗
57. Yesilyurt, M.K. and Aydin, M., Experimental Investigation on the Performance, Combustion and Exhaust Emission Characteristics of a Compression-Ignition Engine Fueled with Cottonseed Oil Biodiesel/Diethyl Ether/Diesel Fuel Blends, Energy Convers. Manag., vol. 205, p. 112355, 2020.10.1016/j.enconman.2019.112355 ↗
58. Yu, W.B., Yang, W.M., and Zhao, F.Y., Investigation of Internal Nozzle Flow, Spray and Combustion Characteristics Fueled with Diesel, Gasoline and Wide Distillation Fuel (WDF) based on a Piezoelectric Injector and a Direct Injection Compression Ignition Engine, Appl. Therm. Eng., vol. 114, pp. 905-920, 2017.10.1016/j.applthermaleng.2016.12.034 ↗
59. Zeng, M., Wullenkord, J., Graf, I., and Kohse-Hoeinghaus, K., Influence of Dimethyl Ether and Diethyl Ether Addition on the Flame Structure and Pollutant Formation in Premixed Iso-Octane Flames, Combust. Flame, vol. 184, pp. 41-54, 2017.10.1016/j.combustflame.2017.05.028 ↗
60. Zhan, C., Feng, Z.H., Ma, W.A., Zhang, M.Z., Tang, C.L., and Huang, Z.H., Experimental Investigation on Effect of Ethanol and Di-Ethyl Ether Addition on the Spray Characteristics of Diesel/Biodiesel Blends under High Injection Pressure, Fuel, vol. 218, pp. 1-11, 2018.10.1016/j.fuel.2017.12.038 ↗
61. Zhan, C., Tong, S.Q., Tang, C.L., and Huang, Z.H., The Spray Vaporization Characteristics of Gasoline/Diethyl Ether Blends at Sub-and Super-Critical Conditions, Appl. Therm. Eng., vol. 164, p. 13, 2020.10.1016/j.applthermaleng.2019.114453 ↗
62. Zhang, X.W., Huang, X., Ni, P.Y., and Li, X., Strategies to Reduce Emissions from Diesel Engines under Cold Start Conditions: A Review, Energies, vol. 16, no. 13, p. 5192, 2023.10.3390/en16135192 ↗