journal article·2024

EXPERIMENTAL STUDY OF THE SPRAY PATTERN AND MERGER PROCESS OF DUAL-LAYER, ROTATING CONICAL LIQUID SHEETS

Lixin Shen, Shuangcheng Yang, Yangjun Zhang, Weilin Zhuge, Yuping Qian, Zunhua Zhang, Fei Xing

Atomization and Sprays· Volume 34· Issue 11
Publisher page

Abstract

To obtain a comprehensive understanding of the primary breakup mechanism of dual-layer, rotating conical liquid sheets, the spray field of a dual-orifice, pressure-swirl atomizer is observed using high-speed shadowgraphy. The influences of the pressure drop in the primary and pilot flow channels and of the merger of the dual-layer liquid sheet on spray morphology, spray cone angle, and liquid sheet surface fluctuations are investigated on the basis of an analysis of spray field images. Attention is focused on the mechanisms underlying the behavior of the disturbance waves generated during the merger of the dual-layer liquid sheet. The results of this study reveal that the pressure drops in the primary and pilot flow channels affect the spray pattern, spray cone angle, and liquid sheet surface fluctuations. It is found that the influence of the pressure drop in the primary channel is dominant, and the changes in the liquid sheet surface fluctuations are related to the spray pattern. During liquid sheet merger (after the inner sheet has reached the expected spray cone angle), the spray cone angle of the outer sheet decreases, and only after the sheets are in contact with each other does the amplitude of the surface fluctuations become significantly larger and generate more medium- and high-frequency disturbance waves.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Plant Surface Properties and Treatments · Fluid Dynamics and Heat Transfer · Electrohydrodynamics and Fluid Dynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Ahn, K., Han, Y.M., Seo, S., and Choi, H.S., Effects of Injector Recess and Chamber Pressure on Combustion Characteristics of Liquid-Liquid Swirl Coaxial Injectors, Combust. Sci. Technol., vol. 183, nos. 1-3, pp. 252-270, 2011.10.1080/00102202.2010.516289 ↗
2. Ding, J.W., Study on Stability and Liquid Sheet Breakup Mechanism of Liquid/Liquid Coaxial Swirling Jets, PhD, Beijing Jiaotong University, 2017.
3. Dumouchel, C., On the Experimental Investigation on Primary Atomization of Liquid Streams, Exp. Fluids, vol. 45, pp. 371-422, 2008.10.1007/s00348-008-0526-0 ↗
4. Fan, X., Liu, C., Mu, Y., Wang, Y., Wang, K., and Xu, G., Experimental Investigations on Atomization Characteristics of Dual-Orifice Atomizers Part I: Optimization Method Formation, Proc. Inst. Mech. Eng. Part A: J. Power Energy, vol. 235, no. 4, pp. 807-822, 2021.10.1177/0957650920961616 ↗
5. Ghorbanian, K., Ashjaee, M., Soltani, M., Mesbahi, M.H., and Morad, M.R., Experimental Flow Visualization of Single Swirl Spray Pattern at Various Pressure Drops, 39th AIAA/ASME/SAE/ASEE Joint Propulsion Conf. and Exhibit, Huntsville, AL, 2003.10.2514/6.2003-4758 ↗
6. Gong, C.M., Huang, K., Jia, J.L., Su, Y., Gao, Q., and Liu, X.J., Regulated Emissions from a Direct-Injection Spark-Ignition Methanol Engine, Energy, vol. 36, no. 5, pp. 3379-3387, 2011.10.1016/j.energy.2011.03.035 ↗
7. Kang, Z.T., The Unsteady Atomization Mechanism and Combustion Characteristics of Gas-Liquid Swirl Coaxial Injector, PhD, National University of Defense Technology, 2016.
8. Kim, D., Han, P., Im, J.H., Yoon, Y., and Bazarov, V.G., Effect of Recess on the Spray Characteristics of Liquid-Liquid Swirl Coaxial Injectors, J. Propuls. Power, vol. 23, no. 6, pp. 1194-1203, 2007.10.2514/1.30450 ↗
9. Kim, S., Khil, T., Kim, D., and Yoon Y., Effect of Geometric Parameters on the Liquid Film Thickness and Air Core Formation in a Swirl Injector, Meas. Sci. Technol., vol. 20, pp. 1-11, 2009.10.1088/0957-0233/20/1/015403 ↗
10. Lefebvre, A.H., Atomization and Sprays, New York: Hemisphere Publishing Corporation, 2017.10.1201/9781315120911 ↗
11. Liu, B., Jin, P., Ma, Y., Lv, J., and Cai, G., Experimental Study of the Effects of Weber Number and Recess Length on the Combustion Characteristics for Liquid-Liquid Swirl Coaxial Injector, Aerospace Sci. Technol., vol. 124, p. 107550, 2022.10.1016/j.ast.2022.107550 ↗
12. Liu, J., Zhang, X.Q., Li, Q.L., and Wang, Z.G., Effect of Geometric Parameters on the Spray Cone Angle in the Pressure Swirl Injector, Proc. Inst. Mech. Eng. Part G: J. Aerospace Eng., vol. 227, no. 2, pp. 342-353, 2013.10.1177/0954410011432233 ↗
13. Prakash, R.S., Gadgil, H., and Raghunandan, B.N., Breakup Processes of Pressure Swirl Spray in Gaseous Cross-Flow, Int. J. Multiphase Flow, vol. 66, pp. 79-91, 2014.10.1016/j.ijmultiphaseflow.2014.07.002 ↗
14. Ramamurthi, K., Tharakan, T.J., and Balakrishnan, M., Flow Transition in Swirled Liquid Sheets, 28th AIAA Fluid Dynamics Conf., Trivandrum, India, 1997.10.2514/6.1997-1779 ↗
15. Reddy, K.U. and Mishra, D.P., Studies on Spray Behavior of a Pressure Swirl Atomizer in Transition Regime, J. Propuls. Power, vol. 24, no. 1, pp. 74-80, 2012.10.2514/1.31156 ↗
16. Shen, L.X., Xing, F., Qin, L., and Su, H., Numerical Study of the Primary Breakup Characteristics of the Dual-Layer Rotating Conical Liquid Sheet, Acta Aeronaut. Astronaut. Sinica, vol. 42, no. 12, pp. 104-116, 2021.
17. Shen, L.X., Fang, G.Y., Wang, S.Z., Xing, F., and Chan, S.N., Numerical Study of the Secondary Atomization Characteristics and Droplet Distribution of Pressure Swirl Atomizers, Fuel, vol. 324, p. 124643, 2022a.10.1016/j.fuel.2022.124643 ↗
18. Shen, L.X., Su, H., Qin, L., Xing, F., and Chan, S.N., Numerical Study on the Effects of Dual-Layer Liquid Sheets Merging on Primary Breakup in Dual-Orifice Nozzles, Atomization Sprays, vol. 32, no. 9, pp. 57-78, 2022b.10.1615/AtomizSpr.2022041508 ↗
19. Sheng, L.Y., Research on the Oscillation Characteristics of Liquid-Liquid Swirl Coaxial Injector, PhD, National University of Defense Technology, 2019.
20. Sivakumar, D. and Raghunandan, B.N., Formation and Separation of Merged Liquid Sheets Developed from the Mixing of Coaxial Swirling Liquid Sheets, Phys. Fluids, vol. 15, no. 11, pp. 3443-3451, 2003.10.1063/1.1616032 ↗
21. Urban, A., Katona, B., Maly, M., Jedelsky, J., and Jozsa, V., Empirical Correlation for Spray Half Cone Angle in Plain-Jet Airblast Atomizers, Fuel, vol. 277, p. 118197, 2020.10.1016/j.fuel.2020.118197 ↗
22. Wang, Y., Experimental Study on Breakup and Atomization Characteristics of Coaxial Swirling Liquid Sheet, PhD, Beijing Jiaotong University, 2019.
23. Xue, J., Jog, M.A., Jeng, S.M., Steinthorsson, E., and Benjamin, M.A., Effect of Geometric Parameters on Simplex Atomizer Performance, AIAA J., vol. 42, no. 12, pp. 2408-2415, 2004.10.2514/1.2983 ↗
24. Xu, S., Kang, Z.T., Cheng, P., and Li, Q.L., Effects of Injection Pressure on Spray Angle of Liquid-Liquid Swirl Coaxial Injector, J. Propuls. Technol., vol. 38, no. 7, pp. 1556-1562, 2017
25. Yu, X.B., Chen, S., He, X.M., and Lu, R., Effects Analysis of RP-3 and RP-5 Fuels on Atomization Characteristics of Pressure-Swirl Atomizer, J. Aerospace Power, pp. 1-9, 2023.
26. Zhang, D.W., Fu, Q.F., and Yang, L.J., Theoretical Study on Dynamic Characteristics of Liquid-Liquid Coaxial Swirl Injector, J. Propuls. Technol., vol. 43, no. 9, pp. 222-230, 2022.