A STUDY OF IMPINGING SPRAY G ON TRANSIENT THERMAL LOADING AND FUEL FILM DEPOSITION
Source abstract
Abstract
Under engine cold-start conditions, gasoline injections result in fuel deposition on the cylinder surfaces, due to inhibited fuel vaporization when the contact surfaces are cold. This can lead to the presence of unburnt hydrocarbons and the formation of soot. The engine combustion network's (ECN) Spray G impinging on a wall, under various temperature conditions, was investigated using surface temperature measurements and a suite of optical diagnostics including low-coherence interferometry (LCI). PACE20 under different injection and ambient temperatures was tested. The measurements reported are of non-reacting conditions, whereby the focus of the study is to analyze spray-wall interaction, prior to flame arrival. The experiments were performed inside a spray vessel under engine-relevant conditions, with sprays impinging on a temperature-controlled wall equipped with nine fast-response surface thermocouples. The wall was placed 40 mm downstream from the injector to represent the typical distance between the piston surface and injector during cold-start injections in the intake cycle. The injector was mounted on a rotational stage, causing different regions of the plume to impinge on the thermocouple array. This enabled high spatial and temporal resolution of the surface temperature measurements. LCI was used for film thickness quantification, which provided insights on the film dynamics upon impingement and the evaporation rates. Highspeed visualization techniques further aided in the understanding of transient fuel distribution on the wall.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Combustion Engine Technologies · Biodiesel Production and Applications · Plant Surface Properties and Treatments
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. Implementation of a Drop-Wall Interaction Model Considering High Ambient Pressure for Engine Simulations10.1615/AtomizSpr.2022038549 ↗
2. Fuel Injection Pressure Effects on the Cold Start Performance of a GDI Engine
3. A Study of Thermal Characteristics and Fuel Film Evaporation of Fuel Sprays Impinging on a Surface
4. ECN, Engine Combustion Network, accessed from https://ecn.sandia.gov/, 2021.
5. Spatio-Temporal Identification of Plume Dynamics by 3D Computed Tomography Using Engine Combustion Network Spray G Injector and Various Fuels10.1016/j.fuel.2020.118359 ↗
6. Ability of Particulate Matter Index to Describe Sooting Tendency of Various Gasoline Formulations in a Stratified-Charge Spark-Ignition Engine10.1016/j.proci.2020.06.173 ↗
7. Mayer, D., Seelig, A., Kunz, T., Kopple, F., Mansbart, M., and Bargende, M., Experimental Investigation of Flame-Wall-Impingement and Near-Wall Combustion on the Piston Temperature of a Diesel Engine Using Instantaneous Surface Temperature Measurements, SAE Tech. Rep. 2018-01-1782, 2018.10.4271/2018-01-1782 ↗
8. Fuel Deposition and Re-Atomisation from Fuel/Air Flows through Engine Inlet Valves10.1016/S0142-727X(01)00098-4 ↗
9. Entrainment Waves in Diesel Jets10.4271/2009-01-1355 ↗
10. Relationship between Diesel Fuel Spray Vapor Penetration/Dispersion and Local Fuel Mixture Fraction10.4271/2011-01-0686 ↗
11. Gasoline Wall Films and Spray/Wall Interaction Analyzed by Infrared Thermography, SAE
12. High-Speed Fizeau Interferometry for Film Topography Measurement during Spray Film Interaction10.1063/1.5053591 ↗
13. Quantitative UV-Absorption Imaging of Liquid Fuel Films and Their Evaporation10.2218/iclass.2021.5947 ↗
14. Determination of Heat Transfer Augmentation Due to Fuel Spray Impingement in a High-Speed Diesel Engine10.4271/2009-01-0843 ↗
15. High-Speed Low-Coherence Interferometry of Fuel Films in Impinging Gasoline Direct Injection Sprays
16. Zhao, F.Q., Lai, M., and Harrington, D.L., A Review of Mixture Preparation and Combustion Control Strategies for Spark-Ignited Direct-Injection Gasoline Engines, SAE Technical Rep. 970627, 1997.10.4271/970627 ↗