journal article·2022

THE END OF INJECTION STUDY OF A MULTIHOLE GASOLINE DIRECT INJECTOR UNDER FLASH-BOILING CONDITIONS

Chinmoy K. Mohapatra, G. L. Jacobsohn, David P. Schmidt

Atomization and Sprays· Volume 32· Issue 2
Publisher page

Abstract

The early and late portions of transient fuel injection have proven to be a rich area of research, especially since the end of injection can cause a disproportionate amount of emissions in direct injection internal combustion engines. The presented work simulates a gasoline direct injector operating under cavitating conditions by employing a more gradual and easily implemented model of closure that avoids spurious water-hammer effects. The results show cavitation at low valve lift for both flash-boiling and nonflash-boiling conditions. Further, this study reveals post-closure dynamics that result in dribble, which is expected to contribute to unburnt hydrocarbon emissions. Flashing versus nonflashing conditions are shown to cause different sac and nozzle behaviors after needle closure. In particular, a slowly boiling sac is observed for the flash-boiling condition which causes spurious postinjection behaviors. However, post-needle closure, traces of ambient gas and liquid fuel, which are the main source of dribble, are observed for the nonflashing condition. The current work indicates more tip wetting for the flash-boiling condition compared to the nonflashing condition during both pre- and post-needle closure phases.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Combustion Engine Technologies · Hydraulic and Pneumatic Systems · Control Systems in Engineering

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.