journal article·2021

EXPERIMENTAL ANALYSIS IN DYNAMICS CHARACTERISTICS OF IMPINGING SPRAY BY A PFI INJECTOR: FROM SPRAY ATOMIZATION TO FUEL ADHESION FORMATION

Chao Gong, Hongliang Luo, Xuecheng Wu, Keiya Nishida

Atomization and Sprays· Volume 31· Issue 12
Publisher page

Abstract

Experimental research on port fuel injection (PFI) spray and impingement was conducted. A twelve-holes injector with the same hole diameter at 0.2 mm was applied to jet the plume onto a flat wall. The effects of impingement distance (Dimp) and injection mass (Minj) were checked on the macro- and micro- behaviors of the PFI spray. Diffused back illumination (DBI) method was used to observe the impinging spray development as well as the impinging spray height (Hi). Moreover, refractive index matching (RIM) technique was performed to obtain the fuel adhesion on the wall after impingement. Besides, droplet size was measured along the spray axis location. Results showed that with more Minj, Hi increases sharply due to more fuel supply, indicating stronger fuel splashing after impingement. However, owing to the momentum loss, longer Dimp decreases Hi. Furthermore, the size distribution tendency of "Increase - Decrease 1st – Stable - Decrease 2nd" was discussed by the time-resolved sauter mean diameter (SMD). For fuel adhesion on the wall, as Dimp and Minj showed different roles on it, a certain threshold to separate "stick" and "splash" was proposed with a consideration of We and liquid thickness.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Combustion and flame dynamics · Fluid Dynamics and Heat Transfer · Advanced Combustion Engine Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.