journal article·2021

INFLUENCE OF DROPLET PROPERTIES ON THE COATING OF FREE-FALLING SPHERICAL PARTICLES

Lars Pasternak, J. Moreno Mañas, Martin Sommerfeld

Atomization and Sprays· Volume 31· Issue 2
Publisher page

Abstract

In this work, based on experimental measurements, a model for the collision and coating of freely moving solid particles with smaller liquid droplets will be introduced. These results are required for a more accurate numerical prediction of such coating processes by the Euler/Lagrange approach including the relevant impact geometries. The decisive advantage of the experimental setup is that the droplet-particle collisions are investigated under unsteady conditions. By means of imaging measurement techniques, this collision is analyzed at defined relative velocities and single-droplet spacing in order to determine the collision outcome. High-resolution, high-speed cameras in combination with backlighting produced by LED arrays are used to record the collision process over the entire sequence. Due to the motion of the falling particles, an additional particle position detection system for automatic acquisition control of the two high-speed cameras is used. The collision images are then processed by an adapted open-source image analysis software applying appropriate filters. The parameters that were examined are the size ratio (droplet/particle), droplet properties (type of liquid, viscosity, surface tension), relative velocity, and the geometrical parameters for the point of impact of the droplet on the particle surface. In the present experiments, the droplets are smaller than the particles, having size ratios of Δ ≈ 0.3 and 0.5 (droplet/particle diameter) and the considered liquids (i.e., water and maltodextrin) are both wetting. All these parameters need to be taken into account when defining the collision outcome regimes and developing appropriate correlations. The collision results are summarized in a B-Weber-number diagram (B being the impact parameter, i.e., the non-dimensional lateral displacement), which represents the geometry of the collision and the relative velocities of each individual collision. The collision results are differentiated into rebound, deposition and separation, or splashing. For the boundary line between deposition and separation a correlation is developed stemming from droplet-droplet collisions and correlated with the Ohne-sorge number. As a final step, the deposited droplet volume as well as the liquid coating thickness on the particle, the contact angle, and the coated particle surface are determined. For the development of the coating model, these variables are combined in dependence of relevant dimensionless numbers and a correlation is developed. The proposed models will be further refined to be applicable in Euler/Lagrange calculations of technical powder-coating processes.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Particle Dynamics in Fluid Flows · Plant Surface Properties and Treatments · Fluid Dynamics and Heat Transfer

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.