journal article·2011

DROPLET SIZE AND VELOCITY MEASUREMENTS AT THE OUTLET OF A HOLLOW CONE SPRAY NOZZLE

Arnaud Foissac, Jeanne Malet, Maria Rosaria Vetrano, Jean-Marie Buchlin, Stephane Mimouni, Francois Feuillebois, Olivier Simonin

Atomization and Sprays· Volume 21· Issue 11
Publisher page

Abstract

During the course of a severe accident in a nuclear pressurized water reactor (PWR), hydrogen may be produced by reactor core oxidation and distributed into the containment. Spray systems are used in order to limit overpressure, enhance the gas mixing, avoid hydrogen accumulation, and wash out fission products. In order to simulate these phenomena with computational fluid dynamics codes, it is first necessary to know the droplet size and velocity distributions close to the outlet nozzle. Furthermore, since most of the phenomena relative to droplets (condensation, gas entrainment, and collisions) are of particular importance in the region just below the nozzle, accurate input data are needed for real-scale PWR calculations. The objective is, therefore, to determine experimentally these input data under atmospheric conditions. Experimental measurements were performed on a single spray nozzle, which is routinely set up in many PWRs. This nozzle is generally used with water at a relative pressure supply of 3.5 bar, producing a mass flow rate of approximately 1 kg/s. At a distance of 20 cm, in which under ambient conditions atomization is just achieved, it is found that the geometric mean diameter varies from 280 to 340 μm, the Sauter mean diameter varies from 430 to 520 μm, and the mean axial velocity varies from 14 to 20 m/s. The radial velocity is around 7 m/s, whereas the orthoradial velocity is almost equal to zero at this distance of the nozzle. Gas velocity measurements around the spray are also performed. © 2011 by Begell House, Inc.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Combustion and Detonation Processes · Particle Dynamics in Fluid Flows · Cyclone Separators and Fluid Dynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.