journal article·1998

EFFECT OF COAL PARTICLE SIZE ON COAL-WATER SLURRY (CWS) ATOMIZATION

S. Y. Son, Kenneth D. Kihm

Atomization and Sprays· Volume 8· Issue 5
Publisher page

Abstract

To determine the effect of coal particle size on coal-water slurry (CWS) atomization, Sauter mean diameters (SMD) of spray droplets have been measured for various slurries containing three different coal particle sizes (32−45 μm, 45−63 μm, and 63−90 μm). The test sprays are generated by a sonic air jet blasting onto the cross-injecting CWS mixture. The diffraction particle analyzing technique (the Malvern 2600D system) measures spray SMDs nonintrusively. The results show persistently that the spray droplet SMDs of the CWS containing smaller coal particles are larger than the SMDs of the CWS containing larger coal particles. This finding is consistent with the fact that the former exhibits larger viscosity than the latter. In addition, the internal capillary holding force between the particles and water increases with decreasing particle sizes because of their smaller radii of curvature and larger total surface area. The increased holding forces of smaller coal particles enhance their resistance against the external airblast and make the atomization difficult. However, smaller spray SMDs of the CWS containing larger coal particles are attributed to both their lower viscosity and their lower capillary holding forces, and thereby weaker resistance against the external airblast.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Coal Combustion and Slurry Processing · Erosion and Abrasive Machining · Fluid Dynamics and Heat Transfer

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.