journal article·2001

DEPENDENCE OF SPRAYING PERFORMANCE ON THE INTERNAL FLOW PATTERN IN EFFERVESCENT ATOMIZERS

Sang Yong Lee, Joo Youn Kim

Atomization and Sprays· Volume 11· Issue 6
Publisher page

Abstract

The effect of the flow patterns inside the mixing chamber on the atomization performance of largeorifice (> 1.2 mm) effervescent atomizers for the low injection pressure range (< 4 bar) was examined experimentally. The transparent mixing chamber has a rectangular cross section (8 mm × 2 mm). The parameters tested were the air/liquid ratio (ALR), injection pressure, and the nozzle orifice diameter. Three different flow regimes were observed: bubbly, annular, and intermittent flows. In the bubbly flow regime, the discharged air/liquid mixture disintegrates into drops through the processes of bubble expansion and ligament breakup. On the other hand, in the annular flow regime, the liquid annulus disintegrates into fine drops by aerodynamic interaction due to high relative velocity between the core gas and the liquid film. In the intermittent flow regime, the bubble expansion/ligament disintegration and the annulus disintegration modes appear alternately. Transition criteria between the two-phase flow patterns within the mixing chamber are proposed based on the drift flux model. Finally, a drop size correlation encompassing all those flow regimes is proposed.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Fluid Dynamics and Heat Transfer · Plant Surface Properties and Treatments · Electrohydrodynamics and Fluid Dynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.