Collagen/Nigella sativa/chitosan inscribed electrospun hybrid bio-nanocomposites for skin tissue engineering

The sophisticated new tissue regeneration focused on nanocomposite with different morphologies achieved through advanced manufacturing technology with the inclusion of bio-inscribed materials has piqued the research community’s interest. This research aims at developing hybrid bio-nanocomposites with collagen (Col), Nigella sativa (Ns) oil and chitosan (Cs) by a bi-layered green electrospinning on polyvinyl chloride (PVA) layer in a different ratio for tissue regeneration. Fiber morphologies through scanning electron microscope (SEM), Fourier transform infrared spectroscopy (FTIR), moisture management, tensile test, antibacterial activity, cell cytotoxicity and wound healing through rabbit model of the fabricated hybrid bio-nanocomposites were investigated. It is worth noting that water-soluble Col (above 60% solution) does not form Taylor cones during electrospinning because unable to overcome the surface tension of the solution (viscosity) to form fibers. The results show that water soluble Col (50% solution) to Cs (25% solution) and Ns (25% solution) has good fiber formation with mean diameter 384 ± 27 nm and degree of porosity is 79%. The fast-absorbing and slow-drying hybrid bio-nanocomposites maintain a moist environment for wounds and allowing gaseous exchange for cell migration and proliferation by the synergistic effects of bio-polymers. All of the biopolymers in bio-nanocomposite improve the H-bonds, which accounts for enough tensile strength to withstand cell pulling force. The antibacterial ZOI concentrations against S. aureus and E. coli were 10 and 8 mm, respectively, which appeared to be sufficient to inhibit bacterial action with 100% cell viability (cytotoxicity). The synergistic effects of Ns and Cs improve tissue regeneration, while native Col improves antibacterial activity, and the rabbit model achieves approximately 84% wound closure in only 10 days, which is 1.5 times faster than the control model. So, the fabricated hybrid bio-composites may be useful for skin tissue engineering.